[PATCH v9 0/2] media: ov7740: Add a V4L2 sensor-level driver

[Wenyou.Yang at microchip.com]

Hi Sakari,

Do you have some comments on this version?


Best Regards,
Wenyou Yang

> -----Original Message-----
> From: linux-media-owner at vger.kernel.org [mailto:linux-media-
> owner at vger.kernel.org] On Behalf Of Wenyou Yang
> Sent: 2017年12月11日 9:32
> To: Mauro Carvalho Chehab <mchehab at s-opensource.com>; Rob Herring
> <robh+dt at kernel.org>; Mark Rutland <mark.rutland at arm.com>
> Cc: linux-kernel at vger.kernel.org; Nicolas Ferre - M43238
> <Nicolas.Ferre at microchip.com>; devicetree at vger.kernel.org; Sakari Ailus
> <sakari.ailus at iki.fi>; Jonathan Corbet <corbet at lwn.net>; Hans Verkuil
> <hverkuil at xs4all.nl>; linux-arm-kernel at lists.infradead.org; Linux Media Mailing List
> <linux-media at vger.kernel.org>; Wenyou Yang - A41535
> <Wenyou.Yang at microchip.com>
> Subject: [PATCH v9 0/2] media: ov7740: Add a V4L2 sensor-level driver
> 
> Add a Video4Linux2 sensor-level driver for the OmniVision OV7740 VGA camera
> image sensor.
> 
> Changes in v9:
>  - Use the new SPDX ids.
> 
> Changes in v8:
>  - As the registers are written at stream start, remove the written
>    code from the set fmt function.
> 
> Changes in v7:
>  - Add Acked-by tag.
>  - Fix the wrong handle of default register configuration.
>  - Add the missed assignment of ov7740->frmsize.
> 
> Changes in v6:
>  - Remove unnecessary #include <linux/init>.
>  - Remove unnecessary comments and extra newline.
>  - Add const for some structures.
>  - Add the check of the return value from regmap_write().
>  - Simplify the calling of __v4l2_ctrl_handler_setup().
>  - Add the default format initialization function.
>  - Integrate the set_power() and enable/disable the clock into
>    one function.
> 
> Changes in v5:
>  - Squash the driver and MAINTAINERS entry patches to one.
>  - Precede the driver patch with the bindings patch.
> 
> Changes in v4:
>  - Assign 'val' a initial value to avoid warning: 'val' may be
>    used uninitialized.
>  - Rename REG_REG15 to avoid warning: "REG_REG15" redefined.
> 
> Changes in v3:
>  - Explicitly document the "remote-endpoint" property.
>  - Put the MAINTAINERS change to a separate patch.
> 
> Changes in v2:
>  - Split off the bindings into a separate patch.
>  - Add a new entry to the MAINTAINERS file.
> 
> Wenyou Yang (2):
>   media: ov7740: Document device tree bindings
>   media: i2c: Add the ov7740 image sensor driver
> 
>  .../devicetree/bindings/media/i2c/ov7740.txt       |   47 +
>  MAINTAINERS                                        |    8 +
>  drivers/media/i2c/Kconfig                          |    8 +
>  drivers/media/i2c/Makefile                         |    1 +
>  drivers/media/i2c/ov7740.c                         | 1216 ++++++++++++++++++++
>  5 files changed, 1280 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/media/i2c/ov7740.txt
>  create mode 100644 drivers/media/i2c/ov7740.c
> 
> --
> 2.15.0