[PATCH 7/8] ARM: dts: keystone-k2e-clocks: Add missing unit name to clock nodes that have regs

Nishanth Menon nm at ti.com
Fri Dec 15 05:21:01 PST 2017


Add the control register as the base for the clock nodes which are
missing them. This squashes the following warnings of the effect when built
with W=1:
arch/arm/boot/dts/keystone-k2e-evm.dtb: Warning (unit_address_vs_reg): Node /soc at 0/clocks/clkusb1 has a reg or ranges property, but no unit name
arch/arm/boot/dts/keystone-k2e-evm.dtb: Warning (unit_address_vs_reg): Node /soc at 0/clocks/clkhyperlink0 has a reg or ranges property, but no unit name
arch/arm/boot/dts/keystone-k2e-evm.dtb: Warning (unit_address_vs_reg): Node /soc at 0/clocks/clkpcie1 has a reg or ranges property, but no unit name
arch/arm/boot/dts/keystone-k2e-evm.dtb: Warning (unit_address_vs_reg): Node /soc at 0/clocks/clkxge has a reg or ranges property, but no unit name

Reported-by: Rob Herring <robh at kernel.org>
Signed-off-by: Nishanth Menon <nm at ti.com>
---
 arch/arm/boot/dts/keystone-k2e-clocks.dtsi | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/keystone-k2e-clocks.dtsi b/arch/arm/boot/dts/keystone-k2e-clocks.dtsi
index a0fe6eccca8d..e4a01211d9a1 100644
--- a/arch/arm/boot/dts/keystone-k2e-clocks.dtsi
+++ b/arch/arm/boot/dts/keystone-k2e-clocks.dtsi
@@ -32,7 +32,7 @@ clocks {
 		reg-names = "control";
 	};
 
-	clkusb1: clkusb1 {
+	clkusb1: clkusb1 at 2350004 {
 		#clock-cells = <0>;
 		compatible = "ti,keystone,psc-clock";
 		clocks = <&chipclk16>;
@@ -42,7 +42,7 @@ clocks {
 		domain-id = <0>;
 	};
 
-	clkhyperlink0: clkhyperlink0 {
+	clkhyperlink0: clkhyperlink02350030 {
 		#clock-cells = <0>;
 		compatible = "ti,keystone,psc-clock";
 		clocks = <&chipclk12>;
@@ -52,7 +52,7 @@ clocks {
 		domain-id = <5>;
 	};
 
-	clkpcie1: clkpcie1 {
+	clkpcie1: clkpcie1 at 235006c {
 		#clock-cells = <0>;
 		compatible = "ti,keystone,psc-clock";
 		clocks = <&chipclk12>;
@@ -62,7 +62,7 @@ clocks {
 		domain-id = <18>;
 	};
 
-	clkxge: clkxge {
+	clkxge: clkxge at 23500c8 {
 		#clock-cells = <0>;
 		compatible = "ti,keystone,psc-clock";
 		clocks = <&chipclk13>;
-- 
2.14.1




More information about the linux-arm-kernel mailing list