[PATCH] KVM: arm/arm64: don't set vtimer->cnt_ctl in kvm_arch_timer_handler

[Christoffer Dall]

On Fri, Dec 15, 2017 at 10:27:02AM +0800, Jia He wrote:

[...]

> >diff --git a/virt/kvm/arm/arch_timer.c b/virt/kvm/arm/arch_timer.c
> >index 73d262c4712b..544ed15fbbb3 100644
> >--- a/virt/kvm/arm/arch_timer.c
> >+++ b/virt/kvm/arm/arch_timer.c
> >@@ -46,7 +46,7 @@ static const struct kvm_irq_level default_vtimer_irq = {
> >  	.level	= 1,
> >  };
> >-static bool kvm_timer_irq_can_fire(struct arch_timer_context *timer_ctx);
> >+static bool kvm_timer_irq_can_fire(u32 cnt_ctl);
> >  static void kvm_timer_update_irq(struct kvm_vcpu *vcpu, bool new_level,
> >  				 struct arch_timer_context *timer_ctx);
> >  static bool kvm_timer_should_fire(struct arch_timer_context *timer_ctx);
> >@@ -94,6 +94,7 @@ static irqreturn_t kvm_arch_timer_handler(int irq, void *dev_id)
> >  {
> >  	struct kvm_vcpu *vcpu = *(struct kvm_vcpu **)dev_id;
> >  	struct arch_timer_context *vtimer;
> >+	u32 cnt_ctl;
> >  	if (!vcpu) {
> >  		pr_warn_once("Spurious arch timer IRQ on non-VCPU thread\n");
> >@@ -101,8 +102,8 @@ static irqreturn_t kvm_arch_timer_handler(int irq, void *dev_id)
> >  	}
> >  	vtimer = vcpu_vtimer(vcpu);
> >-	vtimer->cnt_ctl = read_sysreg_el0(cntv_ctl);
> >-	if (kvm_timer_irq_can_fire(vtimer))
> >+	cnt_ctl = read_sysreg_el0(cntv_ctl);
> >+	if (kvm_timer_irq_can_fire(cnt_ctl))
> >  		kvm_timer_update_irq(vcpu, true, vtimer);
> IIUC, your patch makes kvm_arch_timer_handler never changesvtimer->cnt_ctl

Yes, that's the idea.

Meanwhile, I think I thought of a cleaner way to do this.  Could you
test the following two patches on your platform as well?

>From 3a594a3aa222bd64a86f6c6afcb209c9be20d5c5 Mon Sep 17 00:00:00 2001
From: Christoffer Dall <christoffer.dall at linaro.org>
Date: Thu, 14 Dec 2017 19:54:50 +0100
Subject: [PATCH 1/2] KVM: arm/arm64: Properly handle arch-timer IRQs after
 vtimer_save_state

The recent timer rework was assuming that once the timer was disabled,
we should no longer see any interrupts from the timer.  This assumption
turns out to not be true, and instead we have to handle the case when
the timer ISR runs even after the timer has been disabled.

This requires a couple of changes:

First, we should never overwrite the cached guest state of the timer
control register when the ISR runs, because KVM may have disabled its
timers when doing vcpu_put(), even though the guest still had the timer
enabled.

Second, we shouldn't assume that the timer is actually firing just
because we see an ISR, but we should check the ISTATUS field of the
timer control register to understand if the hardware timer is really
firing or not.

Signed-off-by: Christoffer Dall <christoffer.dall at linaro.org>
---
 virt/kvm/arm/arch_timer.c | 19 ++++++++++++-------
 1 file changed, 12 insertions(+), 7 deletions(-)

diff --git a/virt/kvm/arm/arch_timer.c b/virt/kvm/arm/arch_timer.c
index aa9adfafe12b..792bcf6277b6 100644
--- a/virt/kvm/arm/arch_timer.c
+++ b/virt/kvm/arm/arch_timer.c
@@ -92,16 +92,21 @@ static irqreturn_t kvm_arch_timer_handler(int irq, void *dev_id)
 {
 	struct kvm_vcpu *vcpu = *(struct kvm_vcpu **)dev_id;
 	struct arch_timer_context *vtimer;
+	u32 cnt_ctl;
 
-	if (!vcpu) {
-		pr_warn_once("Spurious arch timer IRQ on non-VCPU thread\n");
-		return IRQ_NONE;
-	}
-	vtimer = vcpu_vtimer(vcpu);
+	/*
+	 * We may see a timer interrupt after vcpu_put() has been called which
+	 * sets the CPU's vcpu pointer to NULL, because even though the timer
+	 * has been disabled in vtimer_save_state(), the singal may not have
+	 * been retired from the interrupt controller yet.
+	 */
+	if (!vcpu)
+		return IRQ_HANDLED;
 
+	vtimer = vcpu_vtimer(vcpu);
 	if (!vtimer->irq.level) {
-		vtimer->cnt_ctl = read_sysreg_el0(cntv_ctl);
-		if (kvm_timer_irq_can_fire(vtimer))
+		cnt_ctl = read_sysreg_el0(cntv_ctl);
+		if (cnt_ctl & ARCH_TIMER_CTRL_IT_STAT)
 			kvm_timer_update_irq(vcpu, true, vtimer);
 	}
 


>From ed96302b47d209024814df116994f64dc8f07c96 Mon Sep 17 00:00:00 2001
From: Christoffer Dall <christoffer.dall at linaro.org>
Date: Fri, 15 Dec 2017 00:30:12 +0100
Subject: [PATCH 2/2] KVM: arm/arm64: Fix timer enable flow

When enabling the timer on the first run, we fail to ever restore the
state and mark it as loaded.  That means, that in the initial entry to
the VCPU ioctl, unless we exit to userspace for some reason such as a
pending signal, if the guest programs a timer and blocks, we will wait
forever, because we never read back the hardware state (the loaded flag
is not set), and so we think the timer is disabled, and we never
schedule a background soft timer.

The end result?  The VCPU blocks forever, and the only solution is to
kill the thread.

Signed-off-by: Christoffer Dall <christoffer.dall at linaro.org>
---
 virt/kvm/arm/arch_timer.c | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

diff --git a/virt/kvm/arm/arch_timer.c b/virt/kvm/arm/arch_timer.c
index 792bcf6277b6..8869658e6983 100644
--- a/virt/kvm/arm/arch_timer.c
+++ b/virt/kvm/arm/arch_timer.c
@@ -843,10 +843,7 @@ int kvm_timer_enable(struct kvm_vcpu *vcpu)
 no_vgic:
 	preempt_disable();
 	timer->enabled = 1;
-	if (!irqchip_in_kernel(vcpu->kvm))
-		kvm_timer_vcpu_load_user(vcpu);
-	else
-		kvm_timer_vcpu_load_vgic(vcpu);
+	kvm_timer_vcpu_load(vcpu);
 	preempt_enable();
 
 	return 0;


Thanks,
-Christoffer