[PATCH 14/14] ARM: dts: keystone-k2g: Use sdhci-omap programming model
Kishon Vijay Abraham I
kishon at ti.com
Thu Dec 14 05:40:54 PST 2017
Use sdhci-omap programming model based on the generic sdhci
library for programming the MMC/SD controller.
Signed-off-by: Kishon Vijay Abraham I <kishon at ti.com>
---
arch/arm/boot/dts/keystone-k2g.dtsi | 13 +++----------
1 file changed, 3 insertions(+), 10 deletions(-)
diff --git a/arch/arm/boot/dts/keystone-k2g.dtsi b/arch/arm/boot/dts/keystone-k2g.dtsi
index 8f313ff406b9..2c6da70eac38 100644
--- a/arch/arm/boot/dts/keystone-k2g.dtsi
+++ b/arch/arm/boot/dts/keystone-k2g.dtsi
@@ -349,14 +349,10 @@
};
mmc0: mmc at 23000000 {
- compatible = "ti,k2g-hsmmc", "ti,omap4-hsmmc";
+ compatible = "ti,k2g-sdhci";
reg = <0x23000000 0x400>;
interrupts = <GIC_SPI 96 IRQ_TYPE_EDGE_RISING>;
- dmas = <&edma1 24 0>, <&edma1 25 0>;
- dma-names = "tx", "rx";
bus-width = <4>;
- ti,needs-special-reset;
- no-1-8-v;
max-frequency = <96000000>;
power-domains = <&k2g_pds 0xb>;
clocks = <&k2g_clks 0xb 1>, <&k2g_clks 0xb 2>;
@@ -365,14 +361,11 @@
};
mmc1: mmc at 23100000 {
- compatible = "ti,k2g-hsmmc", "ti,omap4-hsmmc";
+ compatible = "ti,k2g-sdhci";
reg = <0x23100000 0x400>;
interrupts = <GIC_SPI 97 IRQ_TYPE_EDGE_RISING>;
- dmas = <&edma1 26 0>, <&edma1 27 0>;
- dma-names = "tx", "rx";
bus-width = <8>;
- ti,needs-special-reset;
- ti,non-removable;
+ non-removable;
max-frequency = <96000000>;
power-domains = <&k2g_pds 0xc>;
clocks = <&k2g_clks 0xc 1>, <&k2g_clks 0xc 2>;
--
2.11.0
More information about the linux-arm-kernel
mailing list