[PATCH 3/4] arm: dts: sun8i: a83t: Add CCI-400 node

[Maxime Ripard]

Hi,

On Mon, Dec 11, 2017 at 08:50:00AM +0100, Mylène Josserand wrote:
> Add CCI-400 node and control-port on CPUs needed by MCPM (ie SMP).
> 
> Signed-off-by: Mylène Josserand <mylene.josserand at free-electrons.com>
> ---
>  arch/arm/boot/dts/sun8i-a83t.dtsi | 41 +++++++++++++++++++++++++++++++++++++++
>  1 file changed, 41 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi
> index eeb2e7d0d6dc..3e2aad537972 100644
> --- a/arch/arm/boot/dts/sun8i-a83t.dtsi
> +++ b/arch/arm/boot/dts/sun8i-a83t.dtsi
> @@ -62,48 +62,56 @@
>  			compatible = "arm,cortex-a7";
>  			device_type = "cpu";
>  			reg = <0>;
> +			cci-control-port = <&cci_control0>;
>  		};
>  
>  		cpu at 1 {
>  			compatible = "arm,cortex-a7";
>  			device_type = "cpu";
>  			reg = <1>;
> +			cci-control-port = <&cci_control0>;
>  		};
>  
>  		cpu at 2 {
>  			compatible = "arm,cortex-a7";
>  			device_type = "cpu";
>  			reg = <2>;
> +			cci-control-port = <&cci_control0>;
>  		};
>  
>  		cpu at 3 {
>  			compatible = "arm,cortex-a7";
>  			device_type = "cpu";
>  			reg = <3>;
> +			cci-control-port = <&cci_control0>;
>  		};
>  
>  		cpu at 100 {
>  			compatible = "arm,cortex-a7";
>  			device_type = "cpu";
>  			reg = <0x100>;
> +			cci-control-port = <&cci_control1>;
>  		};
>  
>  		cpu at 101 {
>  			compatible = "arm,cortex-a7";
>  			device_type = "cpu";
>  			reg = <0x101>;
> +			cci-control-port = <&cci_control1>;
>  		};
>  
>  		cpu at 102 {
>  			compatible = "arm,cortex-a7";
>  			device_type = "cpu";
>  			reg = <0x102>;
> +			cci-control-port = <&cci_control1>;
>  		};
>  
>  		cpu at 103 {
>  			compatible = "arm,cortex-a7";
>  			device_type = "cpu";
>  			reg = <0x103>;
> +			cci-control-port = <&cci_control1>;
>  		};
>  	};
>  
> @@ -314,6 +322,39 @@
>  			status = "disabled";
>  		};
>  
> +		cci: cci at 1790000 {

You're not using that label, and you should order the node by physical
address.

> +			compatible = "arm,cci-400";
> +			#address-cells = <1>;
> +			#size-cells = <1>;
> +			reg = <0x01790000 0x1000>;

The size is 0x10000.

> +			ranges = <0x0 0x01790000 0x10000>;
> +
> +			cci_control0: slave-if at 4000 {
> +				compatible = "arm,cci-400-ctrl-if";
> +				interface-type = "ace";
> +				reg = <0x4000 0x1000>;
> +			};
> +
> +			cci_control1: slave-if at 5000 {
> +				compatible = "arm,cci-400-ctrl-if";
> +				interface-type = "ace";
> +				reg = <0x5000 0x1000>;
> +			};
> +
> +			pmu at 9000 {
> +				compatible = "arm,cci-400-pmu,r1";
> +				reg = <0x9000 0x5000>;
> +				interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
> +				<GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
> +				<GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
> +				<GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
> +				<GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
> +				<GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>,
> +				<GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
> +				<GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
> +			};
> +		};

Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20171213/ebbba3d1/attachment.sig>