[PATCH 2/6] ARM: stm32: add initial support for STM32MP157

[Rob Herring]

On Fri, Dec 08, 2017 at 03:11:13PM +0100, Ludovic Barre wrote:
> From: Ludovic Barre <ludovic.barre at st.com>
> 
> This patch adds initial support of STM32MP157 microprocessor (MPU)
> based on Arm Cortex-A7. Under new ARCH_STM32_MPU flag we select the
> needed Cortex-A infrastructure (like gic, timer,...)
> 
> Signed-off-by: Ludovic Barre <ludovic.barre at st.com>
> ---
>  Documentation/arm/stm32/stm32mp157-overview.txt | 12 ++++++++++++
>  Documentation/devicetree/bindings/arm/stm32.txt |  1 +

Please split bindings to separate patches.

>  arch/arm/mach-stm32/Kconfig                     | 22 ++++++++++++++++++++--
>  arch/arm/mach-stm32/Makefile                    |  1 +
>  arch/arm/mach-stm32/board-mpu-dt.c              | 16 ++++++++++++++++
>  5 files changed, 50 insertions(+), 2 deletions(-)
>  create mode 100644 Documentation/arm/stm32/stm32mp157-overview.txt
>  create mode 100644 arch/arm/mach-stm32/board-mpu-dt.c
> 
> diff --git a/Documentation/arm/stm32/stm32mp157-overview.txt b/Documentation/arm/stm32/stm32mp157-overview.txt
> new file mode 100644
> index 0000000..8a3e7cb
> --- /dev/null
> +++ b/Documentation/arm/stm32/stm32mp157-overview.txt

I think new documentation files should be rst format and fit into the 
built documentation. We don't have an SoC description doc for most SoCs.

> @@ -0,0 +1,12 @@
> +			STM32MP157 Overview
> +			===================
> +
> +  Introduction
> +  ------------
> +	The STM32MP157 is a Cortex-A MPU aimed at various applications.
> +	It features:
> +	- Dual core Cortex-A7 application core
> +	- 2D/3D image composition with GPU
> +	- Standard memories interface support
> +	- Standard connectivity, widely inherited from the STM32 MCU family
> +	- Comprehensive security support

Perhaps make this part of the kconfig entry help.

> diff --git a/Documentation/devicetree/bindings/arm/stm32.txt b/Documentation/devicetree/bindings/arm/stm32.txt
> index 05762b0..6808ed9 100644
> --- a/Documentation/devicetree/bindings/arm/stm32.txt
> +++ b/Documentation/devicetree/bindings/arm/stm32.txt
> @@ -7,3 +7,4 @@ using one of the following compatible strings:
>    st,stm32f469
>    st,stm32f746
>    st,stm32h743
> +  st,stm32mp157
> diff --git a/arch/arm/mach-stm32/Kconfig b/arch/arm/mach-stm32/Kconfig
> index c8059ea..2b227c7 100644
> --- a/arch/arm/mach-stm32/Kconfig
> +++ b/arch/arm/mach-stm32/Kconfig
> @@ -1,12 +1,12 @@
>  menuconfig ARCH_STM32
> -	bool "STMicrolectronics STM32 family" if ARM_SINGLE_ARMV7M
> +	bool "STMicrolectronics STM32 family" if ARM_SINGLE_ARMV7M || ARCH_MULTI_V7
>  	select ARCH_HAS_RESET_CONTROLLER
>  	select CLKSRC_STM32
>  	select PINCTRL
>  	select RESET_CONTROLLER
>  	select STM32_EXTI
>  	help
> -	  Support for STMicroelectronics STM32 MCU family
> +	  Support for STMicroelectronics STM32 MCU/MPU family
>  
>  if ARCH_STM32
>  
> @@ -40,4 +40,22 @@ config MACH_STM32H743
>  
>  endif
>  
> +if ARCH_MULTI_V7
> +
> +config ARCH_STM32_MPU
> +	bool "STMicrolectronics STM32 MPU"
> +	default y
> +	select ARM_GIC
> +	select HAVE_ARM_ARCH_TIMER
> +	select ARM_PSCI
> +	help
> +	  Support for STMicroelectronics STM32 Microprocessors.
> +
> +config MACH_STM32MP157

Is this actually used?

> +	bool "STMicrolectronics STM32MP157"
> +	depends on ARCH_STM32_MPU
> +	default y
> +
> +endif
> +
>  endif