[PATCH v2 1/2] acpi, spcr: Make SPCR avialable to other architectures
Prarit Bhargava
prarit at redhat.com
Mon Dec 11 07:50:58 PST 2017
Other architectures can use SPCR to setup an early console or console
but the current code is ARM64 specific.
Change the name of parse_spcr() to acpi_parse_spcr(). Add a weak
function acpi_arch_setup_console() that can be used for arch-specific
setup. Move flags into ACPI code. Update the Documention on the use of
the SPCR.
[v2]: Don't return an error in the baud_rate check of acpi_parse_spcr().
Keep ACPI_SPCR_TABLE selected for ARM64. Fix 8-bit port access width
mmio value. Move baud rate check earlier.
Signed-off-by: Prarit Bhargava <prarit at redhat.com>
Cc: linux-doc at vger.kernel.org
Cc: linux-kernel at vger.kernel.org
Cc: linux-arm-kernel at lists.infradead.org
Cc: linux-pm at vger.kernel.org
Cc: linux-acpi at vger.kernel.org
Cc: linux-serial at vger.kernel.org
Cc: Bhupesh Sharma <bhsharma at redhat.com>
Cc: Lv Zheng <lv.zheng at intel.com>
Cc: Thomas Gleixner <tglx at linutronix.de>
Cc: Ingo Molnar <mingo at redhat.com>
Cc: "H. Peter Anvin" <hpa at zytor.com>
Cc: x86 at kernel.org
Cc: Jonathan Corbet <corbet at lwn.net>
Cc: Catalin Marinas <catalin.marinas at arm.com>
Cc: Will Deacon <will.deacon at arm.com>
Cc: "Rafael J. Wysocki" <rjw at rjwysocki.net>
Cc: Timur Tabi <timur at codeaurora.org>
---
Documentation/admin-guide/kernel-parameters.txt | 6 +-
arch/arm64/kernel/acpi.c | 128 ++++++++++++++++-
drivers/acpi/Kconfig | 7 +-
drivers/acpi/spcr.c | 175 ++++++------------------
drivers/tty/serial/earlycon.c | 15 +-
include/linux/acpi.h | 11 +-
include/linux/serial_core.h | 2 -
7 files changed, 184 insertions(+), 160 deletions(-)
diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index 6571fbfdb2a1..0d173289c67e 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -914,9 +914,9 @@
earlycon= [KNL] Output early console device and options.
- When used with no options, the early console is
- determined by the stdout-path property in device
- tree's chosen node.
+ [ARM64] The early console is determined by the
+ stdout-path property in device tree's chosen node,
+ or determined by the ACPI SPCR table.
cdns,<addr>[,options]
Start an early, polled-mode console on a Cadence
diff --git a/arch/arm64/kernel/acpi.c b/arch/arm64/kernel/acpi.c
index b3162715ed78..b3e33bbdf3b7 100644
--- a/arch/arm64/kernel/acpi.c
+++ b/arch/arm64/kernel/acpi.c
@@ -25,7 +25,6 @@
#include <linux/memblock.h>
#include <linux/of_fdt.h>
#include <linux/smp.h>
-#include <linux/serial_core.h>
#include <asm/cputype.h>
#include <asm/cpu_ops.h>
@@ -177,6 +176,128 @@ static int __init acpi_fadt_sanity_check(void)
return ret;
}
+/*
+ * Erratum 44 for QDF2432v1 and QDF2400v1 SoCs describes the BUSY bit as
+ * occasionally getting stuck as 1. To avoid the potential for a hang, check
+ * TXFE == 0 instead of BUSY == 1. This may not be suitable for all UART
+ * implementations, so only do so if an affected platform is detected in
+ * acpi_parse_spcr().
+ */
+bool qdf2400_e44_present;
+EXPORT_SYMBOL(qdf2400_e44_present);
+
+/*
+ * Some Qualcomm Datacenter Technologies SoCs have a defective UART BUSY bit.
+ * Detect them by examining the OEM fields in the SPCR header, similar to PCI
+ * quirk detection in pci_mcfg.c.
+ */
+static bool qdf2400_erratum_44_present(struct acpi_table_header *h)
+{
+ if (memcmp(h->oem_id, "QCOM ", ACPI_OEM_ID_SIZE))
+ return false;
+
+ if (!memcmp(h->oem_table_id, "QDF2432 ", ACPI_OEM_TABLE_ID_SIZE))
+ return true;
+
+ if (!memcmp(h->oem_table_id, "QDF2400 ", ACPI_OEM_TABLE_ID_SIZE) &&
+ h->oem_revision == 1)
+ return true;
+
+ return false;
+}
+
+/*
+ * APM X-Gene v1 and v2 UART hardware is an 16550 like device but has its
+ * register aligned to 32-bit. In addition, the BIOS also encoded the
+ * access width to be 8 bits. This function detects this errata condition.
+ */
+static bool xgene_8250_erratum_present(struct acpi_table_spcr *tb)
+{
+ bool xgene_8250 = false;
+
+ if (tb->interface_type != ACPI_DBG2_16550_COMPATIBLE)
+ return false;
+
+ if (memcmp(tb->header.oem_id, "APMC0D", ACPI_OEM_ID_SIZE) &&
+ memcmp(tb->header.oem_id, "HPE ", ACPI_OEM_ID_SIZE))
+ return false;
+
+ if (!memcmp(tb->header.oem_table_id, "XGENESPC",
+ ACPI_OEM_TABLE_ID_SIZE) && tb->header.oem_revision == 0)
+ xgene_8250 = true;
+
+ if (!memcmp(tb->header.oem_table_id, "ProLiant",
+ ACPI_OEM_TABLE_ID_SIZE) && tb->header.oem_revision == 1)
+ xgene_8250 = true;
+
+ return xgene_8250;
+}
+
+int acpi_arch_setup_console(struct acpi_table_spcr *table,
+ char *opts, char *uart, char *iotype,
+ int baud_rate, bool earlycon)
+{
+ if (table->header.revision < 2) {
+ pr_err("wrong table version\n");
+ return -ENOENT;
+ }
+
+ switch (table->interface_type) {
+ case ACPI_DBG2_ARM_SBSA_32BIT:
+ snprintf(iotype, ACPI_SPCR_BUF_SIZE, "mmio32");
+ /* fall through */
+ case ACPI_DBG2_ARM_PL011:
+ case ACPI_DBG2_ARM_SBSA_GENERIC:
+ case ACPI_DBG2_BCM2835:
+ snprintf(uart, ACPI_SPCR_BUF_SIZE, "pl011");
+ break;
+ default:
+ if (strlen(uart) == 0)
+ return -ENOENT;
+ }
+
+ /*
+ * If the E44 erratum is required, then we need to tell the pl011
+ * driver to implement the work-around.
+ *
+ * The global variable is used by the probe function when it
+ * creates the UARTs, whether or not they're used as a console.
+ *
+ * If the user specifies "traditional" earlycon, the qdf2400_e44
+ * console name matches the EARLYCON_DECLARE() statement, and
+ * SPCR is not used. Parameter "earlycon" is false.
+ *
+ * If the user specifies "SPCR" earlycon, then we need to update
+ * the console name so that it also says "qdf2400_e44". Parameter
+ * "earlycon" is true.
+ *
+ * For consistency, if we change the console name, then we do it
+ * for everyone, not just earlycon.
+ */
+ if (qdf2400_erratum_44_present(&table->header)) {
+ qdf2400_e44_present = true;
+ if (earlycon)
+ snprintf(uart, ACPI_SPCR_BUF_SIZE, "qdf2400_e44");
+ }
+
+ if (xgene_8250_erratum_present(table)) {
+ snprintf(iotype, ACPI_SPCR_BUF_SIZE, "mmio32");
+
+ /* for xgene v1 and v2 we don't know the clock rate of the
+ * UART so don't attempt to change to the baud rate state
+ * in the table because driver cannot calculate the dividers
+ */
+ snprintf(opts, ACPI_SPCR_OPTS_SIZE, "%s,%s,0x%llx", uart,
+ iotype, table->serial_port.address);
+ } else {
+ snprintf(opts, ACPI_SPCR_OPTS_SIZE, "%s,%s,0x%llx,%d", uart,
+ iotype, table->serial_port.address, baud_rate);
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL(acpi_arch_setup_console);
+
/*
* acpi_boot_table_init() called from setup_arch(), always.
* 1. find RSDP and get its address, and then find XSDT
@@ -230,10 +351,11 @@ void __init acpi_boot_table_init(void)
done:
if (acpi_disabled) {
- if (earlycon_init_is_deferred)
+ if (console_acpi_spcr_enable)
early_init_dt_scan_chosen_stdout();
} else {
- parse_spcr(earlycon_init_is_deferred);
+ /* Always enable the ACPI SPCR console */
+ acpi_parse_spcr(console_acpi_spcr_enable);
if (IS_ENABLED(CONFIG_ACPI_BGRT))
acpi_table_parse(ACPI_SIG_BGRT, acpi_parse_bgrt);
}
diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig
index 46505396869e..9ae98eeada76 100644
--- a/drivers/acpi/Kconfig
+++ b/drivers/acpi/Kconfig
@@ -79,7 +79,12 @@ config ACPI_DEBUGGER_USER
endif
config ACPI_SPCR_TABLE
- bool
+ bool "ACPI Serial Port Console Redirection Support"
+ default y if ARM64
+ help
+ Enable support for Serial Port Console Redirection (SPCR) Table.
+ This table provides information about the configuration of the
+ earlycon console.
config ACPI_LPIT
bool
diff --git a/drivers/acpi/spcr.c b/drivers/acpi/spcr.c
index 324b35bfe781..f4bb8110e404 100644
--- a/drivers/acpi/spcr.c
+++ b/drivers/acpi/spcr.c
@@ -16,65 +16,18 @@
#include <linux/kernel.h>
#include <linux/serial_core.h>
-/*
- * Erratum 44 for QDF2432v1 and QDF2400v1 SoCs describes the BUSY bit as
- * occasionally getting stuck as 1. To avoid the potential for a hang, check
- * TXFE == 0 instead of BUSY == 1. This may not be suitable for all UART
- * implementations, so only do so if an affected platform is detected in
- * parse_spcr().
- */
-bool qdf2400_e44_present;
-EXPORT_SYMBOL(qdf2400_e44_present);
-
-/*
- * Some Qualcomm Datacenter Technologies SoCs have a defective UART BUSY bit.
- * Detect them by examining the OEM fields in the SPCR header, similiar to PCI
- * quirk detection in pci_mcfg.c.
- */
-static bool qdf2400_erratum_44_present(struct acpi_table_header *h)
-{
- if (memcmp(h->oem_id, "QCOM ", ACPI_OEM_ID_SIZE))
- return false;
-
- if (!memcmp(h->oem_table_id, "QDF2432 ", ACPI_OEM_TABLE_ID_SIZE))
- return true;
-
- if (!memcmp(h->oem_table_id, "QDF2400 ", ACPI_OEM_TABLE_ID_SIZE) &&
- h->oem_revision == 1)
- return true;
-
- return false;
-}
-
-/*
- * APM X-Gene v1 and v2 UART hardware is an 16550 like device but has its
- * register aligned to 32-bit. In addition, the BIOS also encoded the
- * access width to be 8 bits. This function detects this errata condition.
- */
-static bool xgene_8250_erratum_present(struct acpi_table_spcr *tb)
+int __weak acpi_arch_setup_console(struct acpi_table_spcr *table,
+ char *opts, char *uart, char *iotype,
+ int baud_rate, bool earlycon)
{
- bool xgene_8250 = false;
-
- if (tb->interface_type != ACPI_DBG2_16550_COMPATIBLE)
- return false;
-
- if (memcmp(tb->header.oem_id, "APMC0D", ACPI_OEM_ID_SIZE) &&
- memcmp(tb->header.oem_id, "HPE ", ACPI_OEM_ID_SIZE))
- return false;
-
- if (!memcmp(tb->header.oem_table_id, "XGENESPC",
- ACPI_OEM_TABLE_ID_SIZE) && tb->header.oem_revision == 0)
- xgene_8250 = true;
-
- if (!memcmp(tb->header.oem_table_id, "ProLiant",
- ACPI_OEM_TABLE_ID_SIZE) && tb->header.oem_revision == 1)
- xgene_8250 = true;
-
- return xgene_8250;
+ snprintf(opts, ACPI_SPCR_OPTS_SIZE, "%s,%s,0x%llx,%d", uart, iotype,
+ table->serial_port.address, baud_rate);
+ return 0;
}
+bool console_acpi_spcr_enable __initdata;
/**
- * parse_spcr() - parse ACPI SPCR table and add preferred console
+ * acpi_parse_spcr() - parse ACPI SPCR table and add preferred console
*
* @earlycon: set up earlycon for the console specified by the table
*
@@ -86,13 +39,13 @@ static bool xgene_8250_erratum_present(struct acpi_table_spcr *tb)
* from arch initialization code as soon as the DT/ACPI decision is made.
*
*/
-int __init parse_spcr(bool earlycon)
+int __init acpi_parse_spcr(bool earlycon)
{
- static char opts[64];
+ static char opts[ACPI_SPCR_OPTS_SIZE];
+ static char uart[ACPI_SPCR_BUF_SIZE];
+ static char iotype[ACPI_SPCR_BUF_SIZE];
struct acpi_table_spcr *table;
acpi_status status;
- char *uart;
- char *iotype;
int baud_rate;
int err;
@@ -105,48 +58,6 @@ int __init parse_spcr(bool earlycon)
if (ACPI_FAILURE(status))
return -ENOENT;
- if (table->header.revision < 2) {
- err = -ENOENT;
- pr_err("wrong table version\n");
- goto done;
- }
-
- if (table->serial_port.space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY) {
- switch (ACPI_ACCESS_BIT_WIDTH((
- table->serial_port.access_width))) {
- default:
- pr_err("Unexpected SPCR Access Width. Defaulting to byte size\n");
- case 8:
- iotype = "mmio";
- break;
- case 16:
- iotype = "mmio16";
- break;
- case 32:
- iotype = "mmio32";
- break;
- }
- } else
- iotype = "io";
-
- switch (table->interface_type) {
- case ACPI_DBG2_ARM_SBSA_32BIT:
- iotype = "mmio32";
- /* fall through */
- case ACPI_DBG2_ARM_PL011:
- case ACPI_DBG2_ARM_SBSA_GENERIC:
- case ACPI_DBG2_BCM2835:
- uart = "pl011";
- break;
- case ACPI_DBG2_16550_COMPATIBLE:
- case ACPI_DBG2_16550_SUBSET:
- uart = "uart";
- break;
- default:
- err = -ENOENT;
- goto done;
- }
-
switch (table->baud_rate) {
case 3:
baud_rate = 9600;
@@ -165,43 +76,36 @@ int __init parse_spcr(bool earlycon)
goto done;
}
- /*
- * If the E44 erratum is required, then we need to tell the pl011
- * driver to implement the work-around.
- *
- * The global variable is used by the probe function when it
- * creates the UARTs, whether or not they're used as a console.
- *
- * If the user specifies "traditional" earlycon, the qdf2400_e44
- * console name matches the EARLYCON_DECLARE() statement, and
- * SPCR is not used. Parameter "earlycon" is false.
- *
- * If the user specifies "SPCR" earlycon, then we need to update
- * the console name so that it also says "qdf2400_e44". Parameter
- * "earlycon" is true.
- *
- * For consistency, if we change the console name, then we do it
- * for everyone, not just earlycon.
- */
- if (qdf2400_erratum_44_present(&table->header)) {
- qdf2400_e44_present = true;
- if (earlycon)
- uart = "qdf2400_e44";
+ switch (table->interface_type) {
+ case ACPI_DBG2_16550_COMPATIBLE:
+ case ACPI_DBG2_16550_SUBSET:
+ snprintf(uart, ACPI_SPCR_BUF_SIZE, "uart");
+ break;
+ default:
+ break;
}
- if (xgene_8250_erratum_present(table)) {
- iotype = "mmio32";
+ if (table->serial_port.space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY) {
+ u8 width = ACPI_ACCESS_BIT_WIDTH((
+ table->serial_port.access_width));
+ switch (width) {
+ default:
+ pr_err("Unexpected SPCR Access Width. Defaulting to byte size\n");
+ case 8:
+ snprintf(iotype, ACPI_SPCR_BUF_SIZE, "mmio");
+ break;
+ case 16:
+ case 32:
+ snprintf(iotype, ACPI_SPCR_BUF_SIZE, "mmio%d", width);
+ break;
+ }
+ } else
+ snprintf(iotype, ACPI_SPCR_BUF_SIZE, "io");
- /* for xgene v1 and v2 we don't know the clock rate of the
- * UART so don't attempt to change to the baud rate state
- * in the table because driver cannot calculate the dividers
- */
- snprintf(opts, sizeof(opts), "%s,%s,0x%llx", uart, iotype,
- table->serial_port.address);
- } else {
- snprintf(opts, sizeof(opts), "%s,%s,0x%llx,%d", uart, iotype,
- table->serial_port.address, baud_rate);
- }
+ err = acpi_arch_setup_console(table, opts, uart, iotype, baud_rate,
+ earlycon);
+ if (err)
+ goto done;
pr_info("console: %s\n", opts);
@@ -209,7 +113,6 @@ int __init parse_spcr(bool earlycon)
setup_earlycon(opts);
err = add_preferred_console(uart, 0, opts + strlen(uart) + 1);
-
done:
acpi_put_table((struct acpi_table_header *)table);
return err;
diff --git a/drivers/tty/serial/earlycon.c b/drivers/tty/serial/earlycon.c
index 4c8b80f1c688..b22afb62c7a3 100644
--- a/drivers/tty/serial/earlycon.c
+++ b/drivers/tty/serial/earlycon.c
@@ -196,26 +196,15 @@ int __init setup_earlycon(char *buf)
return -ENOENT;
}
-/*
- * When CONFIG_ACPI_SPCR_TABLE is defined, "earlycon" without parameters in
- * command line does not start DT earlycon immediately, instead it defers
- * starting it until DT/ACPI decision is made. At that time if ACPI is enabled
- * call parse_spcr(), else call early_init_dt_scan_chosen_stdout()
- */
-bool earlycon_init_is_deferred __initdata;
-
/* early_param wrapper for setup_earlycon() */
static int __init param_setup_earlycon(char *buf)
{
int err;
- /*
- * Just 'earlycon' is a valid param for devicetree earlycons;
- * don't generate a warning from parse_early_params() in that case
- */
+ /* Just 'earlycon' is a valid param for devicetree and ACPI SPCR. */
if (!buf || !buf[0]) {
if (IS_ENABLED(CONFIG_ACPI_SPCR_TABLE)) {
- earlycon_init_is_deferred = true;
+ console_acpi_spcr_enable = true;
return 0;
} else if (!buf) {
return early_init_dt_scan_chosen_stdout();
diff --git a/include/linux/acpi.h b/include/linux/acpi.h
index dc1ebfeeb5ec..875d7327d91c 100644
--- a/include/linux/acpi.h
+++ b/include/linux/acpi.h
@@ -1241,10 +1241,17 @@ static inline bool acpi_has_watchdog(void) { return false; }
#endif
#ifdef CONFIG_ACPI_SPCR_TABLE
+#define ACPI_SPCR_OPTS_SIZE 64
+#define ACPI_SPCR_BUF_SIZE 32
extern bool qdf2400_e44_present;
-int parse_spcr(bool earlycon);
+extern bool console_acpi_spcr_enable __initdata;
+extern int acpi_arch_setup_console(struct acpi_table_spcr *table,
+ char *opts, char *uart, char *iotype,
+ int baud_rate, bool earlycon);
+int acpi_parse_spcr(bool earlycon);
#else
-static inline int parse_spcr(bool earlycon) { return 0; }
+static const bool console_acpi_spcr_enable;
+static inline int acpi_parse_spcr(bool earlycon) { return 0; }
#endif
#if IS_ENABLED(CONFIG_ACPI_GENERIC_GSI)
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index 37b044e78333..abfffb4b1c37 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -376,10 +376,8 @@ extern int of_setup_earlycon(const struct earlycon_id *match,
const char *options);
#ifdef CONFIG_SERIAL_EARLYCON
-extern bool earlycon_init_is_deferred __initdata;
int setup_earlycon(char *buf);
#else
-static const bool earlycon_init_is_deferred;
static inline int setup_earlycon(char *buf) { return 0; }
#endif
--
2.15.0.rc0.39.g2f0e14e64
More information about the linux-arm-kernel
mailing list