[PATCH V2 1/1] ARM: debug: add stm32 low-level debug support

[Ludovic Barre]

From: Ludovic Barre <ludovic.barre at st.com>

This adds low-level debug support on USART1 for STM32F4
and STM32F7. Compiled via 'CONFIG_DEBUG_LL' and 'CONFIG_EARLY_PRINTK'.
Enabled via 'earlyprintk' in bootargs.

Signed-off-by: Gerald Baeza <gerald.baeza at st.com>
Signed-off-by: Ludovic Barre <ludovic.barre at st.com>
Acked-by: Alexandre TORGUE <alexandre.torgue at st.com>
---
 arch/arm/Kconfig.debug         | 25 +++++++++++++++++++++++++
 arch/arm/include/debug/stm32.S | 41 +++++++++++++++++++++++++++++++++++++++++
 2 files changed, 66 insertions(+)
 create mode 100644 arch/arm/include/debug/stm32.S

diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 17685e1..9469c58 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -1140,6 +1140,26 @@ choice
 
 		  If unsure, say N.
 
+	config STM32F4_DEBUG_UART
+		bool "Use STM32F4 UART for low-level debug"
+		depends on ARCH_STM32
+		select DEBUG_STM32_UART
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on STM32 based platforms.
+
+		  If unsure, say N.
+
+	config STM32F7_DEBUG_UART
+		bool "Use STM32F7 UART for low-level debug"
+		depends on ARCH_STM32
+		select DEBUG_STM32_UART
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on STM32 based platforms.
+
+		  If unsure, say N.
+
 	config TEGRA_DEBUG_UART_AUTO_ODMDATA
 		bool "Kernel low-level debugging messages via Tegra UART via ODMDATA"
 		depends on ARCH_TEGRA
@@ -1424,6 +1444,10 @@ config DEBUG_STI_UART
 	bool
 	depends on ARCH_STI
 
+config DEBUG_STM32_UART
+	bool
+	depends on ARCH_STM32
+
 config DEBUG_SIRFSOC_UART
 	bool
 	depends on ARCH_SIRF
@@ -1472,6 +1496,7 @@ config DEBUG_LL_INCLUDE
 	default "debug/s5pv210.S" if DEBUG_S5PV210_UART
 	default "debug/sirf.S" if DEBUG_SIRFSOC_UART
 	default "debug/sti.S" if DEBUG_STI_UART
+	default "debug/stm32.S" if DEBUG_STM32_UART
 	default "debug/tegra.S" if DEBUG_TEGRA_UART
 	default "debug/ux500.S" if DEBUG_UX500_UART
 	default "debug/vexpress.S" if DEBUG_VEXPRESS_UART0_DETECT
diff --git a/arch/arm/include/debug/stm32.S b/arch/arm/include/debug/stm32.S
new file mode 100644
index 0000000..3f1a970
--- /dev/null
+++ b/arch/arm/include/debug/stm32.S
@@ -0,0 +1,41 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) STMicroelectronics 2017 - All Rights Reserved
+ * Author: Gerald Baeza <gerald_baeza at st.com> for STMicroelectronics.
+ */
+
+#define STM32_UART_BASE			0x40011000	/* USART1 */
+
+#ifdef CONFIG_STM32F4_DEBUG_UART
+#define STM32_USART_SR_OFF		0x00
+#define STM32_USART_TDR_OFF		0x04
+#endif
+
+#ifdef CONFIG_STM32F7_DEBUG_UART
+#define STM32_USART_SR_OFF		0x1C
+#define STM32_USART_TDR_OFF		0x28
+#endif
+
+#define STM32_USART_TC			(1 << 6)	/* Tx complete       */
+#define STM32_USART_TXE			(1 << 7)	/* Tx data reg empty */
+
+		.macro	addruart, rp, rv, tmp
+		ldr	\rp,      =STM32_UART_BASE	@ physical base
+		ldr	\rv,      =STM32_UART_BASE      @ virt base /* NoMMU */
+		.endm
+
+                .macro  senduart,rd,rx
+                strb    \rd, [\rx, #STM32_USART_TDR_OFF]
+                .endm
+
+                .macro  waituart,rd,rx
+1001:	ldr	\rd, [\rx, #(STM32_USART_SR_OFF)]	@ Read Status Register
+	tst	\rd, #STM32_USART_TXE			@ TXE = 1 = tx empty
+	beq	1001b
+                .endm
+
+                .macro  busyuart,rd,rx
+1001:	ldr	\rd, [\rx, #(STM32_USART_SR_OFF)]	@ Read Status Register
+	tst	\rd, #STM32_USART_TC			@ TC = 1 = tx complete
+	beq	1001b
+                .endm
-- 
2.7.4