[PATCH 18/20] ARM: dts: aspeed: Add Qanta Q71L BMC machine
Joel Stanley
joel at jms.id.au
Sun Dec 10 21:07:02 PST 2017
From: Rick Altherr <raltherr at google.com>
The Qanta Q71L BMC is an ASPEED ast2400 based BMC that is part of a
Qanta x86 server.
This adds the device tree description for most upstream components. It
is a squashed commit from the OpenBMC kernel tree.
Signed-off-by: Peter Hanson <peterh at google.com>
Signed-off-by: Andrew Jeffery <andrew at aj.id.au>
Signed-off-by: Patrick Venture <venture at google.com>
Signed-off-by: Rick Altherr <raltherr at google.com>
Signed-off-by: Joel Stanley <joel at jms.id.au>
---
arch/arm/boot/dts/Makefile | 3 +-
arch/arm/boot/dts/aspeed-bmc-quanta-q71l.dts | 458 +++++++++++++++++++++++++++
2 files changed, 460 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/boot/dts/aspeed-bmc-quanta-q71l.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 48c55f307aa9..5ab5d9169511 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1106,5 +1106,6 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
aspeed-bmc-opp-palmetto.dtb \
aspeed-bmc-opp-romulus.dtb \
aspeed-bmc-opp-witherspoon.dtb \
- aspeed-bmc-opp-zaius.dtb
+ aspeed-bmc-opp-zaius.dtb \
+ aspeed-bmc-quanta-q71l.dtb
endif
diff --git a/arch/arm/boot/dts/aspeed-bmc-quanta-q71l.dts b/arch/arm/boot/dts/aspeed-bmc-quanta-q71l.dts
new file mode 100644
index 000000000000..2f40bab63149
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-quanta-q71l.dts
@@ -0,0 +1,458 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "aspeed-g4.dtsi"
+
+/ {
+ model = "Quanta Q71L BMC";
+ compatible = "quanta,q71l-bmc", "aspeed,ast2400";
+
+ chosen {
+ stdout-path = &uart5;
+ bootargs = "console=ttyS4,115200 earlyprintk";
+ };
+
+ memory {
+ reg = <0x40000000 0x8000000>;
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ vga_memory: framebuffer at 47800000 {
+ no-map;
+ reg = <0x47800000 0x00800000>; /* 8MB */
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ heartbeat {
+ gpios = <&gpio ASPEED_GPIO(B, 0) GPIO_ACTIVE_LOW>;
+ };
+
+ power {
+ gpios = <&gpio ASPEED_GPIO(B, 2) GPIO_ACTIVE_LOW>;
+ };
+
+ identify {
+ gpios = <&gpio ASPEED_GPIO(B, 3) GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ iio-hwmon {
+ compatible = "iio-hwmon";
+ io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+ <&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
+ <&adc 8>, <&adc 9>, <&adc 10>;
+ };
+
+ iio-hwmon-battery {
+ compatible = "iio-hwmon";
+ io-channels = <&adc 11>;
+ };
+
+ i2c1mux: i2cmux {
+ compatible = "i2c-mux-gpio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* mux-gpios = <&sgpio 10 GPIO_ACTIVE_HIGH> */
+ i2c-parent = <&i2c1>;
+ };
+};
+
+&fmc {
+ status = "okay";
+ flash at 0 {
+ status = "okay";
+ label = "bmc";
+ m25p,fast-read;
+#include "openbmc-flash-layout.dtsi"
+ };
+};
+
+&spi {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi1_default>;
+
+ flash at 0 {
+ status = "okay";
+ m25p,fast-read;
+ label = "pnor";
+ };
+};
+
+&pinctrl {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_vgahs_default &pinctrl_vgavs_default
+ &pinctrl_ddcclk_default &pinctrl_ddcdat_default>;
+};
+
+&lpc_snoop {
+ status = "okay";
+ snoop-ports = <0x80>;
+};
+
+&mac0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rmii1_default>;
+ use-ncsi;
+};
+
+&mac1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+&uart5 {
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+};
+
+&i2c1 {
+ status = "okay";
+
+ /* temp2 inlet */
+ tmp75 at 4c {
+ compatible = "ti,tmp75";
+ reg = <0x4c>;
+ };
+
+ /* temp3 */
+ tmp75 at 4e {
+ compatible = "ti,tmp75";
+ reg = <0x4e>;
+ };
+
+ /* temp1 */
+ tmp75 at 4f {
+ compatible = "ti,tmp75";
+ reg = <0x4f>;
+ };
+
+ /* Baseboard FRU */
+ eeprom at 54 {
+ compatible = "atmel,24c64";
+ reg = <0x54>;
+ };
+
+ /* FP FRU */
+ eeprom at 57 {
+ compatible = "atmel,24c64";
+ reg = <0x57>;
+ };
+};
+
+&i2c2 {
+ status = "okay";
+
+ /* 0: PCIe Slot 2,
+ * Slot 3,
+ * Slot 6,
+ * Slot 7
+ */
+ i2c-switch at 74 {
+ compatible = "nxp,pca9546";
+ reg = <0x74>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-mux-idle-disconnect; /* may use mux at 77 next. */
+
+ i2c_pcie2: i2c at 0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ i2c_pcie3: i2c at 1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ i2c_pcie6: i2c at 2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ i2c_pcie7: i2c at 3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+ };
+
+ /* 0: PCIe Slot 1,
+ * Slot 4,
+ * Slot 5,
+ * Slot 8,
+ * Slot 9,
+ * Slot 10,
+ * SSD 1,
+ * SSD 2
+ */
+ i2c-switch at 77 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x77>;
+ i2c-mux-idle-disconnect; /* may use mux at 74 next. */
+
+ i2c_pcie1: i2c at 0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ i2c_pcie4: i2c at 1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ i2c_pcie5: i2c at 2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ i2c_pcie8: i2c at 3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+
+ i2c_pcie9: i2c at 4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ };
+
+ i2c_pcie10: i2c at 5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ };
+
+ i2c_ssd1: i2c at 6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ };
+
+ i2c_ssd2: i2c at 7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ };
+ };
+};
+
+&i2c3 {
+ status = "okay";
+
+ /* BIOS FRU */
+ eeprom at 56 {
+ compatible = "atmel,24c64";
+ reg = <0x56>;
+ };
+};
+
+&i2c4 {
+ status = "okay";
+};
+
+&i2c5 {
+ status = "okay";
+};
+
+&i2c6 {
+ status = "okay";
+};
+
+&i2c7 {
+ status = "okay";
+
+ /* 0: PSU4
+ * PSU1
+ * PSU3
+ * PSU2
+ */
+ i2c-switch at 70 {
+ compatible = "nxp,pca9546";
+ reg = <0x70>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2c_psu4: i2c at 0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ i2c_psu1: i2c at 1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ i2c_psu3: i2c at 2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ i2c_psu2: i2c at 3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+ };
+
+ /* PDB FRU */
+ eeprom at 52 {
+ compatible = "atmel,24c64";
+ reg = <0x52>;
+ };
+};
+
+&i2c8 {
+ status = "okay";
+
+ /* BMC FRU */
+ eeprom at 50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+};
+
+&vuart {
+ status = "okay";
+};
+
+&wdt2 {
+ status = "okay";
+};
+
+&pwm_tacho {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm0_default
+ &pinctrl_pwm1_default
+ &pinctrl_pwm2_default
+ &pinctrl_pwm3_default>;
+
+ fan at 0 {
+ reg = <0x00>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+ };
+
+ fan at 1 {
+ reg = <0x01>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x01>;
+ };
+
+ fan at 2 {
+ reg = <0x02>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x02>;
+ };
+
+ fan at 3 {
+ reg = <0x03>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x03>;
+ };
+
+ fan at 4 {
+ reg = <0x00>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x04>;
+ };
+
+ fan at 5 {
+ reg = <0x01>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x05>;
+ };
+
+ fan at 6 {
+ reg = <0x02>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x06>;
+ };
+
+ fan at 7 {
+ reg = <0x03>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x07>;
+ };
+};
+
+&i2c1mux {
+ i2c at 0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* Memory Riser 1 FRU */
+ eeprom at 50 {
+ compatible = "atmel,24c02";
+ reg = <0x50>;
+ };
+
+ /* Memory Riser 2 FRU */
+ eeprom at 51 {
+ compatible = "atmel,24c02";
+ reg = <0x51>;
+ };
+
+ /* Memory Riser 3 FRU */
+ eeprom at 52 {
+ compatible = "atmel,24c02";
+ reg = <0x52>;
+ };
+
+ /* Memory Riser 4 FRU */
+ eeprom at 53 {
+ compatible = "atmel,24c02";
+ reg = <0x53>;
+ };
+ };
+
+ i2c at 1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* Memory Riser 5 FRU */
+ eeprom at 50 {
+ compatible = "atmel,24c02";
+ reg = <0x50>;
+ };
+
+ /* Memory Riser 6 FRU */
+ eeprom at 51 {
+ compatible = "atmel,24c02";
+ reg = <0x51>;
+ };
+
+ /* Memory Riser 7 FRU */
+ eeprom at 52 {
+ compatible = "atmel,24c02";
+ reg = <0x52>;
+ };
+
+ /* Memory Riser 8 FRU */
+ eeprom at 53 {
+ compatible = "atmel,24c02";
+ reg = <0x53>;
+ };
+ };
+};
--
2.14.1
More information about the linux-arm-kernel
mailing list