[PATCH] ARM64: dts: amlogic: use generic bus node names

[Kevin Hilman]

Neil Armstrong <narmstrong at baylibre.com> writes:

> On 06/12/2017 20:30, Kevin Hilman wrote:
>> The DT spec recommends that node-names have generic names like "bus".
>> Fix that in the Amlogic DTs, while leaving the label names to have more
>> SoC-specific names that match with the HW documentation.
>> 
>> Suggested-by: Stephen Boyd <sboyd at codeaurora.org>
>> Signed-off-by: Kevin Hilman <khilman at baylibre.com>
>> ---
>>  arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 4 ++--
>>  arch/arm64/boot/dts/amlogic/meson-gx.dtsi  | 6 +++---
>>  2 files changed, 5 insertions(+), 5 deletions(-)
>> 
>> diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
>> index b932a784b02a..e7213eb53958 100644
>> --- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
>> +++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
>> @@ -113,7 +113,7 @@
>>  		#size-cells = <2>;
>>  		ranges;
>>  
>> -		cbus: cbus at ffd00000 {
>> +		cbus: bus at ffd00000 {
>>  			compatible = "simple-bus";
>>  			reg = <0x0 0xffd00000 0x0 0x25000>;
>>  			#address-cells = <2>;
>> @@ -175,7 +175,7 @@
>>  			};
>>  		};
>>  
>> -		aobus: aobus at ff800000 {
>> +		aobus: bus at ff800000 {
>>  			compatible = "simple-bus";
>>  			reg = <0x0 0xff800000 0x0 0x100000>;
>>  			#address-cells = <2>;
>> diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
>> index 7cdbf58a062f..6cb3c2a52baf 100644
>> --- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
>> +++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
>> @@ -211,7 +211,7 @@
>>  		#size-cells = <2>;
>>  		ranges;
>>  
>> -		cbus: cbus at c1100000 {
>> +		cbus: bus at c1100000 {
>>  			compatible = "simple-bus";
>>  			reg = <0x0 0xc1100000 0x0 0x100000>;
>>  			#address-cells = <2>;
>> @@ -366,7 +366,7 @@
>>  			};
>>  		};
>>  
>> -		aobus: aobus at c8100000 {
>> +		aobus: bus at c8100000 {
>>  			compatible = "simple-bus";
>>  			reg = <0x0 0xc8100000 0x0 0x100000>;
>>  			#address-cells = <2>;
>> @@ -453,7 +453,7 @@
>>  			};
>>  		};
>>  
>> -		hiubus: hiubus at c883c000 {
>> +		hiubus: bus at c883c000 {
>>  			compatible = "simple-bus";
>>  			reg = <0x0 0xc883c000 0x0 0x2000>;
>>  			#address-cells = <2>;
>> 
>
> Reviewed-by: Neil Armstrong <narmstrong at baylibre.com>

Applied to v4.16/dt64 with Neil's review and after doing some basic
build/boot tests.

Thanks,

Kevin