[PATCH 2/3] pinctrl: sunxi: Disable strict mode for old pinctrl drivers
Ludovic Desroches
ludovic.desroches at microchip.com
Thu Dec 7 02:32:31 PST 2017
Hi,
On Thu, Oct 05, 2017 at 10:54:07PM +0200, Maxime Ripard wrote:
> Old pinctrl drivers will need to disable strict mode for various reasons,
> among which:
> - Some DT will still have a pinctrl group for each GPIO used, which will
> be rejected by pin_request. While we could remove those nodes, we still
> have to deal with old DTs.
> - Some GPIOs on these boards need to have their pin configuration changed
> (for bias or current), and there's no clear migration path
>
> Let's disable the strict mode on those SoCs so that there's no breakage.
>
I revive this thread since I am facing the same issue. Did you find a way to
deal with it? I have not seen a new version of this set of patches, I may have
missed it.
Why you didn't choose to add an optionnal property to enforce the use of
the strict mode? I mean, with your solution, if there is a new DT with
an old pin controller, it won't benefit from the strict mode.
Ludovic
> Signed-off-by: Maxime Ripard <maxime.ripard at free-electrons.com>
> ---
> drivers/pinctrl/sunxi/pinctrl-sun4i-a10.c | 1 +
> drivers/pinctrl/sunxi/pinctrl-sun5i.c | 1 +
> drivers/pinctrl/sunxi/pinctrl-sun6i-a31.c | 1 +
> drivers/pinctrl/sunxi/pinctrl-sun8i-a23.c | 1 +
> drivers/pinctrl/sunxi/pinctrl-sun8i-a33.c | 1 +
> drivers/pinctrl/sunxi/pinctrl-sun8i-h3.c | 3 ++-
> drivers/pinctrl/sunxi/pinctrl-sun9i-a80.c | 1 +
> 7 files changed, 8 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/pinctrl/sunxi/pinctrl-sun4i-a10.c b/drivers/pinctrl/sunxi/pinctrl-sun4i-a10.c
> index f763d8d62d6e..295e48fc94bc 100644
> --- a/drivers/pinctrl/sunxi/pinctrl-sun4i-a10.c
> +++ b/drivers/pinctrl/sunxi/pinctrl-sun4i-a10.c
> @@ -1289,6 +1289,7 @@ static const struct sunxi_pinctrl_desc sun4i_a10_pinctrl_data = {
> .npins = ARRAY_SIZE(sun4i_a10_pins),
> .irq_banks = 1,
> .irq_read_needs_mux = true,
> + .disable_strict_mode = true,
> };
>
> static int sun4i_a10_pinctrl_probe(struct platform_device *pdev)
> diff --git a/drivers/pinctrl/sunxi/pinctrl-sun5i.c b/drivers/pinctrl/sunxi/pinctrl-sun5i.c
> index 47afd558b114..27ec99e81c4c 100644
> --- a/drivers/pinctrl/sunxi/pinctrl-sun5i.c
> +++ b/drivers/pinctrl/sunxi/pinctrl-sun5i.c
> @@ -713,6 +713,7 @@ static const struct sunxi_pinctrl_desc sun5i_pinctrl_data = {
> .pins = sun5i_pins,
> .npins = ARRAY_SIZE(sun5i_pins),
> .irq_banks = 1,
> + .disable_strict_mode = true,
> };
>
> static int sun5i_pinctrl_probe(struct platform_device *pdev)
> diff --git a/drivers/pinctrl/sunxi/pinctrl-sun6i-a31.c b/drivers/pinctrl/sunxi/pinctrl-sun6i-a31.c
> index 951a25c18815..82ffaf466892 100644
> --- a/drivers/pinctrl/sunxi/pinctrl-sun6i-a31.c
> +++ b/drivers/pinctrl/sunxi/pinctrl-sun6i-a31.c
> @@ -965,6 +965,7 @@ static const struct sunxi_pinctrl_desc sun6i_a31_pinctrl_data = {
> .pins = sun6i_a31_pins,
> .npins = ARRAY_SIZE(sun6i_a31_pins),
> .irq_banks = 4,
> + .disable_strict_mode = true,
> };
>
> static int sun6i_a31_pinctrl_probe(struct platform_device *pdev)
> diff --git a/drivers/pinctrl/sunxi/pinctrl-sun8i-a23.c b/drivers/pinctrl/sunxi/pinctrl-sun8i-a23.c
> index 721b6935baf3..402fd7d21e7b 100644
> --- a/drivers/pinctrl/sunxi/pinctrl-sun8i-a23.c
> +++ b/drivers/pinctrl/sunxi/pinctrl-sun8i-a23.c
> @@ -563,6 +563,7 @@ static const struct sunxi_pinctrl_desc sun8i_a23_pinctrl_data = {
> .pins = sun8i_a23_pins,
> .npins = ARRAY_SIZE(sun8i_a23_pins),
> .irq_banks = 3,
> + .disable_strict_mode = true,
> };
>
> static int sun8i_a23_pinctrl_probe(struct platform_device *pdev)
> diff --git a/drivers/pinctrl/sunxi/pinctrl-sun8i-a33.c b/drivers/pinctrl/sunxi/pinctrl-sun8i-a33.c
> index ef1e0bef4099..da387211a75e 100644
> --- a/drivers/pinctrl/sunxi/pinctrl-sun8i-a33.c
> +++ b/drivers/pinctrl/sunxi/pinctrl-sun8i-a33.c
> @@ -486,6 +486,7 @@ static const struct sunxi_pinctrl_desc sun8i_a33_pinctrl_data = {
> .npins = ARRAY_SIZE(sun8i_a33_pins),
> .irq_banks = 2,
> .irq_bank_base = 1,
> + .disable_strict_mode = true,
> };
>
> static int sun8i_a33_pinctrl_probe(struct platform_device *pdev)
> diff --git a/drivers/pinctrl/sunxi/pinctrl-sun8i-h3.c b/drivers/pinctrl/sunxi/pinctrl-sun8i-h3.c
> index 518a92df4418..d1719a738c20 100644
> --- a/drivers/pinctrl/sunxi/pinctrl-sun8i-h3.c
> +++ b/drivers/pinctrl/sunxi/pinctrl-sun8i-h3.c
> @@ -491,7 +491,8 @@ static const struct sunxi_pinctrl_desc sun8i_h3_pinctrl_data = {
> .pins = sun8i_h3_pins,
> .npins = ARRAY_SIZE(sun8i_h3_pins),
> .irq_banks = 2,
> - .irq_read_needs_mux = true
> + .irq_read_needs_mux = true,
> + .disable_strict_mode = true,
> };
>
> static int sun8i_h3_pinctrl_probe(struct platform_device *pdev)
> diff --git a/drivers/pinctrl/sunxi/pinctrl-sun9i-a80.c b/drivers/pinctrl/sunxi/pinctrl-sun9i-a80.c
> index bc14e954d7a2..472ef0d91b99 100644
> --- a/drivers/pinctrl/sunxi/pinctrl-sun9i-a80.c
> +++ b/drivers/pinctrl/sunxi/pinctrl-sun9i-a80.c
> @@ -721,6 +721,7 @@ static const struct sunxi_pinctrl_desc sun9i_a80_pinctrl_data = {
> .pins = sun9i_a80_pins,
> .npins = ARRAY_SIZE(sun9i_a80_pins),
> .irq_banks = 5,
> + .disable_strict_mode = true,
> };
>
> static int sun9i_a80_pinctrl_probe(struct platform_device *pdev)
> --
> git-series 0.9.1
> --
> To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
More information about the linux-arm-kernel
mailing list