[PATCH V6 01/12] drivers: move clock common macros out from vendor directories
Chunyan Zhang
zhang.lyra at gmail.com
Thu Dec 7 00:08:37 PST 2017
On 7 December 2017 at 14:47, Stephen Boyd <sboyd at codeaurora.org> wrote:
> On 11/27, Chunyan Zhang wrote:
>> These macros are used by more than one SoC vendor platforms, avoid to
>> have many copies of these code, this patch moves them to the common
>> clock directory which every clock drivers can access to.
>>
>> Signed-off-by: Chunyan Zhang <chunyan.zhang at spreadtrum.com>
>> ---
>> drivers/clk/clk_common.h | 60 ++++++++++++++++++++++++++++++++++++++++++++++++
>> 1 file changed, 60 insertions(+)
>> create mode 100644 drivers/clk/clk_common.h
>>
>> diff --git a/drivers/clk/clk_common.h b/drivers/clk/clk_common.h
>> new file mode 100644
>> index 0000000..21e93d2
>> --- /dev/null
>> +++ b/drivers/clk/clk_common.h
>> @@ -0,0 +1,60 @@
>> +/*
>> + * drivers/clk/clk_common.h
>
> We don't need this in the file too. Please remove this line.
>
>> + *
>> + * SPDX-License-Identifier: GPL-2.0
>> + */
>> +
>> +#ifndef _CLK_COMMON_H_
>> +#define _CLK_COMMON_H_
>> +
>> +#include <linux/clk-provider.h>
>
> Maybe these macros should just go into clk-provider.h?
Ok. And I will also remove the same macros from sunxi-ng/ccu_common.h
and zte/clk.h.
>
>> +
>> +#define CLK_HW_INIT(_name, _parent, _ops, _flags) \
>> + (&(struct clk_init_data) { \
>> + .flags = _flags, \
>> + .name = _name, \
>> + .parent_names = (const char *[]) { _parent }, \
>> + .num_parents = 1, \
>> + .ops = _ops, \
>> + })
>
> Hopefully we don't extend the init structure anymore to have
> something else. I guess we'll do something if that happens.
>
>> +
>> +#define CLK_HW_INIT_PARENTS(_name, _parents, _ops, _flags) \
>> + (&(struct clk_init_data) { \
>> + .flags = _flags, \
>> + .name = _name, \
>> + .parent_names = _parents, \
>> + .num_parents = ARRAY_SIZE(_parents), \
>> + .ops = _ops, \
>> + })
>> +
>> +#define CLK_HW_INIT_NO_PARENT(_name, _ops, _flags) \
>> + (&(struct clk_init_data) { \
>> + .flags = _flags, \
>> + .name = _name, \
>> + .parent_names = NULL, \
>> + .num_parents = 0, \
>> + .ops = _ops, \
>> + })
>> +
>> +#define CLK_FIXED_FACTOR(_struct, _name, _parent, \
>> + _div, _mult, _flags) \
>> + struct clk_fixed_factor _struct = { \
>> + .div = _div, \
>> + .mult = _mult, \
>> + .hw.init = CLK_HW_INIT(_name, \
>> + _parent, \
>> + &clk_fixed_factor_ops, \
>> + _flags), \
>> + }
>> +
>> +#define CLK_FIXED_RATE(_struct, _name, _flags, \
>> + _fixed_rate, _fixed_accuracy) \
>> + struct clk_fixed_rate _struct = { \
>> + .fixed_rate = _fixed_rate, \
>> + .fixed_accuracy = _fixed_accuracy, \
>> + .hw.init = CLK_HW_INIT_NO_PARENT(_name, \
>> + &clk_fixed_rate_ops, \
>> + _flags), \
>> + }
>
> Maybe don't add this one? Usually fixed rate clks come from DT.
Ok, will also move the fixed rate clks from our driver to DT.
Thanks,
Chunyan
>
> --
> Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
> a Linux Foundation Collaborative Project
More information about the linux-arm-kernel
mailing list