[PATCH v2 3/3] arm: dts: mt7623: fix card detection issue on bananapi-r2

sean.wang at mediatek.com sean.wang at mediatek.com
Wed Dec 6 22:43:24 PST 2017


From: Sean Wang <sean.wang at mediatek.com>

Fix that bananapi-r2 booting from SD-card would fail since incorrect
polarity is applied to the previous setup with GPIO_ACTIVE_HIGH.

Cc: stable at vger.kernel.org
Fixes: 0eed8d097612 ("arm: dts: mt7623: Add SD-card and EMMC to bananapi-r2")
Signed-off-by: Sean Wang <sean.wang at mediatek.com>
Tested-by: Matthias Brugger <matthias.bgg at gmail.com>
---
 arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
index 688a863..7bf5aa2 100644
--- a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
+++ b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
@@ -204,7 +204,7 @@
 	bus-width = <4>;
 	max-frequency = <50000000>;
 	cap-sd-highspeed;
-	cd-gpios = <&pio 261 0>;
+	cd-gpios = <&pio 261 GPIO_ACTIVE_LOW>;
 	vmmc-supply = <&mt6323_vmch_reg>;
 	vqmmc-supply = <&mt6323_vio18_reg>;
 };
-- 
2.7.4




More information about the linux-arm-kernel mailing list