[PATCH v3 03/15] dt-bindings: display: sun4i-drm: Add LVDS properties

Chen-Yu Tsai wens at csie.org
Wed Dec 6 19:57:49 PST 2017


On Tue, Dec 5, 2017 at 11:10 PM, Maxime Ripard
<maxime.ripard at free-electrons.com> wrote:
> Some clocks and resets supposed to drive the LVDS logic in the display
> engine have been overlooked when the driver was first introduced.
>
> Add those additional resources to the binding, and we'll deal with the ABI
> stability in the code.
>
> Signed-off-by: Maxime Ripard <maxime.ripard at free-electrons.com>
> ---
>  Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt | 8 +++++++-
>  1 file changed, 8 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt b/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt
> index 50cc72ee1168..d4259a4f5171 100644
> --- a/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt
> +++ b/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt
> @@ -121,6 +121,14 @@ Required properties:
>  On SoCs other than the A33 and V3s, there is one more clock required:
>     - 'tcon-ch1': The clock driving the TCON channel 1
>
> +On SoCs that support LVDS (all SoCs but the A13, H3, H5 and V3s), you
> +need one more reset line:
> +   - 'lvds': The reset line driving the LVDS logic
> +
> +And on the SoCs newer than the A31 (sun6i and sun8i families), you
> +need one more clock line:
> +   - 'lvds-pll': The PLL that can be used to drive the LVDS clock

Is this referring to TCON0_LVDS_Clk_Sel, which can use the MIPI PLL
on the A33? Maybe the description should be more clear, like:

  - 'lvds-alt': An alternative clock separate from the TCON
                that can be used to drive the LVDS clock.

ChenYu

> +
>  DRC
>  ---
>
> --
> git-series 0.9.1



More information about the linux-arm-kernel mailing list