[PATCH 0/2] update the L2 cache settings on Meson8/Meson8b

Kevin Hilman khilman at baylibre.com
Wed Dec 6 11:44:48 PST 2017


Martin Blumenstingl <martin.blumenstingl at googlemail.com> writes:

> The L2 cache settings on our mainline kernel did not match the
> configuration from Amlogic's vendor kernel.
>
> This was boot-tested on a Meson8 (actually Meson8m2, but both use
> the same CPU cores and L2 cache configuration) and a Meson8b board.

Boot tested on meson8b-odroidc1, and applied to v4.16/dt,

Thanks,

Kevin



More information about the linux-arm-kernel mailing list