[PATCH v3 12/20] crypto: arm64/sha1-ce - yield NEON after every block of input

Ard Biesheuvel ard.biesheuvel at linaro.org
Wed Dec 6 11:43:38 PST 2017


Avoid excessive scheduling delays under a preemptible kernel by
yielding the NEON after every block of input.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel at linaro.org>
---
 arch/arm64/crypto/sha1-ce-core.S | 42 ++++++++++++++------
 1 file changed, 29 insertions(+), 13 deletions(-)

diff --git a/arch/arm64/crypto/sha1-ce-core.S b/arch/arm64/crypto/sha1-ce-core.S
index 8550408735a0..3139206e8787 100644
--- a/arch/arm64/crypto/sha1-ce-core.S
+++ b/arch/arm64/crypto/sha1-ce-core.S
@@ -70,31 +70,37 @@
 	 *			  int blocks)
 	 */
 ENTRY(sha1_ce_transform)
+	frame_push	3
+
+	mov		x19, x0
+	mov		x20, x1
+	mov		x21, x2
+
 	/* load round constants */
-	adr		x6, .Lsha1_rcon
+0:	adr		x6, .Lsha1_rcon
 	ld1r		{k0.4s}, [x6], #4
 	ld1r		{k1.4s}, [x6], #4
 	ld1r		{k2.4s}, [x6], #4
 	ld1r		{k3.4s}, [x6]
 
 	/* load state */
-	ld1		{dgav.4s}, [x0]
-	ldr		dgb, [x0, #16]
+	ld1		{dgav.4s}, [x19]
+	ldr		dgb, [x19, #16]
 
 	/* load sha1_ce_state::finalize */
 	ldr_l		w4, sha1_ce_offsetof_finalize, x4
-	ldr		w4, [x0, x4]
+	ldr		w4, [x19, x4]
 
 	/* load input */
-0:	ld1		{v8.4s-v11.4s}, [x1], #64
-	sub		w2, w2, #1
+1:	ld1		{v8.4s-v11.4s}, [x20], #64
+	sub		w21, w21, #1
 
 CPU_LE(	rev32		v8.16b, v8.16b		)
 CPU_LE(	rev32		v9.16b, v9.16b		)
 CPU_LE(	rev32		v10.16b, v10.16b	)
 CPU_LE(	rev32		v11.16b, v11.16b	)
 
-1:	add		t0.4s, v8.4s, k0.4s
+2:	add		t0.4s, v8.4s, k0.4s
 	mov		dg0v.16b, dgav.16b
 
 	add_update	c, ev, k0,  8,  9, 10, 11, dgb
@@ -125,16 +131,25 @@ CPU_LE(	rev32		v11.16b, v11.16b	)
 	add		dgbv.2s, dgbv.2s, dg1v.2s
 	add		dgav.4s, dgav.4s, dg0v.4s
 
-	cbnz		w2, 0b
+	cbz		w21, 3f
+
+	if_will_cond_yield_neon
+	st1		{dgav.4s}, [x19]
+	str		dgb, [x19, #16]
+	do_cond_yield_neon
+	b		0b
+	endif_yield_neon
+
+	b		1b
 
 	/*
 	 * Final block: add padding and total bit count.
 	 * Skip if the input size was not a round multiple of the block size,
 	 * the padding is handled by the C code in that case.
 	 */
-	cbz		x4, 3f
+3:	cbz		x4, 4f
 	ldr_l		w4, sha1_ce_offsetof_count, x4
-	ldr		x4, [x0, x4]
+	ldr		x4, [x19, x4]
 	movi		v9.2d, #0
 	mov		x8, #0x80000000
 	movi		v10.2d, #0
@@ -143,10 +158,11 @@ CPU_LE(	rev32		v11.16b, v11.16b	)
 	mov		x4, #0
 	mov		v11.d[0], xzr
 	mov		v11.d[1], x7
-	b		1b
+	b		2b
 
 	/* store new state */
-3:	st1		{dgav.4s}, [x0]
-	str		dgb, [x0, #16]
+4:	st1		{dgav.4s}, [x19]
+	str		dgb, [x19, #16]
+	frame_pop	3
 	ret
 ENDPROC(sha1_ce_transform)
-- 
2.11.0




More information about the linux-arm-kernel mailing list