[PATCH 1/3] extcon: usbc-cros-ec: add support to notify USB type cables.
Enric Balletbo i Serra
enric.balletbo at collabora.com
Wed Dec 6 03:10:06 PST 2017
From: Benson Leung <bleung at chromium.org>
Extend the driver to notify host and device type cables and the presence
of power.
Signed-off-by: Benson Leung <bleung at chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo at collabora.com>
---
drivers/extcon/extcon-usbc-cros-ec.c | 142 ++++++++++++++++++++++++++++++++++-
include/linux/mfd/cros_ec_commands.h | 17 +++++
2 files changed, 155 insertions(+), 4 deletions(-)
diff --git a/drivers/extcon/extcon-usbc-cros-ec.c b/drivers/extcon/extcon-usbc-cros-ec.c
index 6187f73..6721ab0 100644
--- a/drivers/extcon/extcon-usbc-cros-ec.c
+++ b/drivers/extcon/extcon-usbc-cros-ec.c
@@ -34,16 +34,26 @@ struct cros_ec_extcon_info {
struct notifier_block notifier;
+ unsigned int dr; /* data role */
+ bool pr; /* power role (true if VBUS enabled) */
bool dp; /* DisplayPort enabled */
bool mux; /* SuperSpeed (usb3) enabled */
unsigned int power_type;
};
static const unsigned int usb_type_c_cable[] = {
+ EXTCON_USB,
+ EXTCON_USB_HOST,
EXTCON_DISP_DP,
EXTCON_NONE,
};
+enum usb_data_roles {
+ DR_NONE,
+ DR_HOST,
+ DR_DEVICE,
+};
+
/**
* cros_ec_pd_command() - Send a command to the EC.
* @info: pointer to struct cros_ec_extcon_info
@@ -150,6 +160,7 @@ static int cros_ec_usb_get_role(struct cros_ec_extcon_info *info,
pd_control.port = info->port_id;
pd_control.role = USB_PD_CTRL_ROLE_NO_CHANGE;
pd_control.mux = USB_PD_CTRL_MUX_NO_CHANGE;
+ pd_control.swap = USB_PD_CTRL_SWAP_NONE;
ret = cros_ec_pd_command(info, EC_CMD_USB_PD_CONTROL, 1,
&pd_control, sizeof(pd_control),
&resp, sizeof(resp));
@@ -183,11 +194,72 @@ static int cros_ec_pd_get_num_ports(struct cros_ec_extcon_info *info)
return resp.num_ports;
}
+static const char *cros_ec_usb_role_string(unsigned int role)
+{
+ return role == DR_NONE ? "DISCONNECTED" :
+ (role == DR_HOST ? "DFP" : "UFP");
+}
+
+static const char *cros_ec_usb_power_type_string(unsigned int type)
+{
+ switch (type) {
+ case USB_CHG_TYPE_NONE:
+ return "USB_CHG_TYPE_NONE";
+ case USB_CHG_TYPE_PD:
+ return "USB_CHG_TYPE_PD";
+ case USB_CHG_TYPE_PROPRIETARY:
+ return "USB_CHG_TYPE_PROPRIETARY";
+ case USB_CHG_TYPE_C:
+ return "USB_CHG_TYPE_C";
+ case USB_CHG_TYPE_BC12_DCP:
+ return "USB_CHG_TYPE_BC12_DCP";
+ case USB_CHG_TYPE_BC12_CDP:
+ return "USB_CHG_TYPE_BC12_CDP";
+ case USB_CHG_TYPE_BC12_SDP:
+ return "USB_CHG_TYPE_BC12_SDP";
+ case USB_CHG_TYPE_OTHER:
+ return "USB_CHG_TYPE_OTHER";
+ case USB_CHG_TYPE_VBUS:
+ return "USB_CHG_TYPE_VBUS";
+ case USB_CHG_TYPE_UNKNOWN:
+ return "USB_CHG_TYPE_UNKNOWN";
+ default:
+ return "USB_CHG_TYPE_UNKNOWN";
+ }
+}
+
+static bool cros_ec_usb_power_type_is_wall_wart(unsigned int type,
+ unsigned int role)
+{
+ switch (type) {
+ /* FIXME : Guppy, Donnettes, and other chargers will be miscategorized
+ * because they identify with USB_CHG_TYPE_C, but we can't return true
+ * here from that code because that breaks Suzy-Q and other kinds of
+ * USB Type-C cables and peripherals.
+ */
+ case USB_CHG_TYPE_PROPRIETARY:
+ case USB_CHG_TYPE_BC12_DCP:
+ return true;
+ case USB_CHG_TYPE_PD:
+ case USB_CHG_TYPE_C:
+ case USB_CHG_TYPE_BC12_CDP:
+ case USB_CHG_TYPE_BC12_SDP:
+ case USB_CHG_TYPE_OTHER:
+ case USB_CHG_TYPE_VBUS:
+ case USB_CHG_TYPE_UNKNOWN:
+ case USB_CHG_TYPE_NONE:
+ default:
+ return false;
+ }
+}
+
static int extcon_cros_ec_detect_cable(struct cros_ec_extcon_info *info,
bool force)
{
struct device *dev = info->dev;
int role, power_type;
+ unsigned int dr = DR_NONE;
+ bool pr = false;
bool polarity = false;
bool dp = false;
bool mux = false;
@@ -206,9 +278,12 @@ static int extcon_cros_ec_detect_cable(struct cros_ec_extcon_info *info,
dev_err(dev, "failed getting role err = %d\n", role);
return role;
}
+ dev_dbg(dev, "disconnected\n");
} else {
int pd_mux_state;
+ dr = (role & PD_CTRL_RESP_ROLE_DATA) ? DR_HOST : DR_DEVICE;
+ pr = (role & PD_CTRL_RESP_ROLE_POWER);
pd_mux_state = cros_ec_usb_get_pd_mux_state(info);
if (pd_mux_state < 0)
pd_mux_state = USB_PD_MUX_USB_ENABLED;
@@ -216,20 +291,62 @@ static int extcon_cros_ec_detect_cable(struct cros_ec_extcon_info *info,
dp = pd_mux_state & USB_PD_MUX_DP_ENABLED;
mux = pd_mux_state & USB_PD_MUX_USB_ENABLED;
hpd = pd_mux_state & USB_PD_MUX_HPD_IRQ;
- }
- if (force || info->dp != dp || info->mux != mux ||
- info->power_type != power_type) {
+ dev_dbg(dev,
+ "connected role 0x%x pwr type %d dr %d pr %d pol %d mux %d dp %d hpd %d\n",
+ role, power_type, dr, pr, polarity, mux, dp, hpd);
+ }
+ /*
+ * When there is no USB host (e.g. USB PD charger),
+ * we are not really a UFP for the AP.
+ */
+ if (dr == DR_DEVICE &&
+ cros_ec_usb_power_type_is_wall_wart(power_type, role))
+ dr = DR_NONE;
+
+ if (force || info->dr != dr || info->pr != pr || info->dp != dp ||
+ info->mux != mux || info->power_type != power_type) {
+ bool host_connected = false, device_connected = false;
+
+ dev_dbg(dev, "Type/Role switch! type = %s role = %s\n",
+ cros_ec_usb_power_type_string(power_type),
+ cros_ec_usb_role_string(dr));
+ info->dr = dr;
+ info->pr = pr;
info->dp = dp;
info->mux = mux;
info->power_type = power_type;
- extcon_set_state(info->edev, EXTCON_DISP_DP, dp);
+ if (dr == DR_DEVICE)
+ device_connected = true;
+ else if (dr == DR_HOST)
+ host_connected = true;
+ extcon_set_state(info->edev, EXTCON_USB, device_connected);
+ extcon_set_state(info->edev, EXTCON_USB_HOST, host_connected);
+ extcon_set_state(info->edev, EXTCON_DISP_DP, dp);
+ extcon_set_property(info->edev, EXTCON_USB,
+ EXTCON_PROP_USB_VBUS,
+ (union extcon_property_value)(int)pr);
+ extcon_set_property(info->edev, EXTCON_USB_HOST,
+ EXTCON_PROP_USB_VBUS,
+ (union extcon_property_value)(int)pr);
+ extcon_set_property(info->edev, EXTCON_USB,
+ EXTCON_PROP_USB_TYPEC_POLARITY,
+ (union extcon_property_value)(int)polarity);
+ extcon_set_property(info->edev, EXTCON_USB_HOST,
+ EXTCON_PROP_USB_TYPEC_POLARITY,
+ (union extcon_property_value)(int)polarity);
extcon_set_property(info->edev, EXTCON_DISP_DP,
EXTCON_PROP_USB_TYPEC_POLARITY,
(union extcon_property_value)(int)polarity);
+ extcon_set_property(info->edev, EXTCON_USB,
+ EXTCON_PROP_USB_SS,
+ (union extcon_property_value)(int)mux);
+ extcon_set_property(info->edev, EXTCON_USB_HOST,
+ EXTCON_PROP_USB_SS,
+ (union extcon_property_value)(int)mux);
extcon_set_property(info->edev, EXTCON_DISP_DP,
EXTCON_PROP_USB_SS,
(union extcon_property_value)(int)mux);
@@ -237,6 +354,8 @@ static int extcon_cros_ec_detect_cable(struct cros_ec_extcon_info *info,
EXTCON_PROP_DISP_HPD,
(union extcon_property_value)(int)hpd);
+ extcon_sync(info->edev, EXTCON_USB);
+ extcon_sync(info->edev, EXTCON_USB_HOST);
extcon_sync(info->edev, EXTCON_DISP_DP);
} else if (hpd) {
@@ -322,13 +441,28 @@ static int extcon_cros_ec_probe(struct platform_device *pdev)
return ret;
}
+ extcon_set_property_capability(info->edev, EXTCON_USB,
+ EXTCON_PROP_USB_VBUS);
+ extcon_set_property_capability(info->edev, EXTCON_USB_HOST,
+ EXTCON_PROP_USB_VBUS);
+ extcon_set_property_capability(info->edev, EXTCON_USB,
+ EXTCON_PROP_USB_TYPEC_POLARITY);
+ extcon_set_property_capability(info->edev, EXTCON_USB_HOST,
+ EXTCON_PROP_USB_TYPEC_POLARITY);
extcon_set_property_capability(info->edev, EXTCON_DISP_DP,
EXTCON_PROP_USB_TYPEC_POLARITY);
+ extcon_set_property_capability(info->edev, EXTCON_USB,
+ EXTCON_PROP_USB_SS);
+ extcon_set_property_capability(info->edev, EXTCON_USB_HOST,
+ EXTCON_PROP_USB_SS);
extcon_set_property_capability(info->edev, EXTCON_DISP_DP,
EXTCON_PROP_USB_SS);
extcon_set_property_capability(info->edev, EXTCON_DISP_DP,
EXTCON_PROP_DISP_HPD);
+ info->dr = DR_NONE;
+ info->pr = false;
+
platform_set_drvdata(pdev, info);
/* Get PD events from the EC */
diff --git a/include/linux/mfd/cros_ec_commands.h b/include/linux/mfd/cros_ec_commands.h
index 2b16e95..c907353 100644
--- a/include/linux/mfd/cros_ec_commands.h
+++ b/include/linux/mfd/cros_ec_commands.h
@@ -2904,16 +2904,33 @@ enum usb_pd_control_mux {
USB_PD_CTRL_MUX_AUTO = 5,
};
+enum usb_pd_control_swap {
+ USB_PD_CTRL_SWAP_NONE = 0,
+ USB_PD_CTRL_SWAP_DATA = 1,
+ USB_PD_CTRL_SWAP_POWER = 2,
+ USB_PD_CTRL_SWAP_VCONN = 3,
+ USB_PD_CTRL_SWAP_COUNT
+};
+
struct ec_params_usb_pd_control {
uint8_t port;
uint8_t role;
uint8_t mux;
+ uint8_t swap;
} __packed;
#define PD_CTRL_RESP_ENABLED_COMMS (1 << 0) /* Communication enabled */
#define PD_CTRL_RESP_ENABLED_CONNECTED (1 << 1) /* Device connected */
#define PD_CTRL_RESP_ENABLED_PD_CAPABLE (1 << 2) /* Partner is PD capable */
+#define PD_CTRL_RESP_ROLE_POWER (1 << 0) /* 0=SNK/1=SRC */
+#define PD_CTRL_RESP_ROLE_DATA (1 << 1) /* 0=UFP/1=DFP */
+#define PD_CTRL_RESP_ROLE_VCONN (1 << 2) /* Vconn status */
+#define PD_CTRL_RESP_ROLE_DR_POWER (1 << 3) /* Partner is dualrole power */
+#define PD_CTRL_RESP_ROLE_DR_DATA (1 << 4) /* Partner is dualrole data */
+#define PD_CTRL_RESP_ROLE_USB_COMM (1 << 5) /* Partner USB comm capable */
+#define PD_CTRL_RESP_ROLE_EXT_POWERED (1 << 6) /* Partner externally powerd */
+
struct ec_response_usb_pd_control_v1 {
uint8_t enabled;
uint8_t role;
--
2.9.3
More information about the linux-arm-kernel
mailing list