[PATCH 08/61] ARM: dts: r8a7743: Add DU support

[Simon Horman]

From: Fabrizio Castro <fabrizio.castro at bp.renesas.com>

Add du node to r8a7743 SoC DT. Boards that want to enable the DU
need to specify the output topology.

Signed-off-by: Fabrizio Castro <fabrizio.castro at bp.renesas.com>
Reviewed-by: Biju Das <biju.das at bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas at verge.net.au>
---
 arch/arm/boot/dts/r8a7743.dtsi | 30 ++++++++++++++++++++++++++++++
 1 file changed, 30 insertions(+)

diff --git a/arch/arm/boot/dts/r8a7743.dtsi b/arch/arm/boot/dts/r8a7743.dtsi
index f647b86c0205..112a72baa7a4 100644
--- a/arch/arm/boot/dts/r8a7743.dtsi
+++ b/arch/arm/boot/dts/r8a7743.dtsi
@@ -1034,6 +1034,36 @@
 			};
 		};
 
+		du: display at feb00000 {
+			compatible = "renesas,du-r8a7743";
+			reg = <0 0xfeb00000 0 0x40000>,
+			      <0 0xfeb90000 0 0x1c>;
+			reg-names = "du", "lvds.0";
+			interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 724>,
+				 <&cpg CPG_MOD 723>,
+				 <&cpg CPG_MOD 726>;
+			clock-names = "du.0", "du.1", "lvds.0";
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port at 0 {
+					reg = <0>;
+					du_out_rgb: endpoint {
+					};
+				};
+				port at 1 {
+					reg = <1>;
+					du_out_lvds0: endpoint {
+					};
+				};
+			};
+		};
+
 		pci0: pci at ee090000 {
 			compatible = "renesas,pci-r8a7743",
 				     "renesas,pci-rcar-gen2";
-- 
2.11.0