[PATCH v6 0/5] clk: Add Aspeed clock driver

[Joel Stanley]

Hello clk maintainers,

Has anyone had a chance to review these patches?

On Tue, Nov 28, 2017 at 5:49 PM, Joel Stanley <joel at jms.id.au> wrote:
> This driver supports the ast2500, ast2400 (and derivative) BMC SoCs from
> Aspeed.
>
> This is v6. See patches for detailed changelogs.
>
> v6: Added reviewed-bys
> v5: Address review from Andrew
> v4: Address review from Andrew and Stephen.
> v3: Address review from Andrew and has seen more testing on hardware
> v2: split the driver out into a series of patches to make them easier to
> review.
>
> All of the important clocks are supported, with most non-essential ones
> also implemented where information is available. I am working with
> Aspeed to clear up some of the missing information, including the
> missing parent-sibling relationships.
>
> We need to know the rate of the apb clock in order to correctly program
> the clocksource driver, so the apb and it's parents are created in the
> CLK_OF_DECLARE_DRIVER callback.
>
> The rest of the clocks are created at normal driver probe time. I
> followed the Gemini driver's lead with using the regmap where I could,
> but also having a pointer to the base address for use with the common
> clock callbacks.
>
> The driver borrows from the clk_gate common clock infrastructure, but modifies
> it in order to support the clock gate and reset pair that most of the clocks
> have. This pair must be reset-ungated-released, with appropriate delays,
> according to the datasheet.
>
> The first patch introduces the core clock registration parts, and describes
> the clocks. The second creates the core clocks, giving the system enough to
> boot (but without uart). Next come the non-core clocks, and finally the reset
> controller that is used for the few cocks that don't have a gate to go with their
> reset pair.
>
> Please review!
>
> Cheers,
>
> Joel
>
> Joel Stanley (5):
>   clk: Add clock driver for ASPEED BMC SoCs
>   clk: aspeed: Register core clocks
>   clk: aspeed: Add platform driver and register PLLs
>   clk: aspeed: Register gated clocks
>   clk: aspeed: Add reset controller
>
>  drivers/clk/Kconfig                      |  12 +
>  drivers/clk/Makefile                     |   1 +
>  drivers/clk/clk-aspeed.c                 | 657 +++++++++++++++++++++++++++++++
>  include/dt-bindings/clock/aspeed-clock.h |  54 +++
>  4 files changed, 724 insertions(+)
>  create mode 100644 drivers/clk/clk-aspeed.c
>  create mode 100644 include/dt-bindings/clock/aspeed-clock.h
>
> --
> 2.14.1
>