[PATCH v2 02/12] ARM: dts: imx51-zii-rdu1: Add the unit addresses in sysled

[Lucas Stach]

Am Montag, den 04.12.2017, 10:20 -0200 schrieb Fabio Estevam:
> From: Fabio Estevam <fabio.estevam at nxp.com>
> 
> As described at Documentation/devicetree/bindings/mfd/mc13xxx.txt the
> reg property is mandatory, so add the corresponding unit address in
> order to fix the following build warnings with W=1:
> 
> arch/arm/boot/dts/imx51-zii-rdu1.dtb: Warning (unit_address_vs_reg):
> Node /soc/aips at 70000000/spba at 70000000/ecspi at 70010000/pmic at 0/leds/sysl
> ed0 has a reg or ranges property, but no unit name
> arch/arm/boot/dts/imx51-zii-rdu1.dtb: Warning (unit_address_vs_reg):
> Node /soc/aips at 70000000/spba at 70000000/ecspi at 70010000/pmic at 0/leds/sysl
> ed1 has a reg or ranges property, but no unit name
> 
> Cc: Lucas Stach <l.stach at pengutronix.de>
> Signed-off-by: Fabio Estevam <fabio.estevam at nxp.com>

Reviewed-by: Lucas Stach <l.stach at pengutronix.de>

> ---
> Changes since v1:
> - Removed 'Node /memory has a reg or ranges property, but no unit
> name' error
> 
>  arch/arm/boot/dts/imx51-zii-rdu1.dts | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/imx51-zii-rdu1.dts
> b/arch/arm/boot/dts/imx51-zii-rdu1.dts
> index f9fdb7c..70fdcdd 100644
> --- a/arch/arm/boot/dts/imx51-zii-rdu1.dts
> +++ b/arch/arm/boot/dts/imx51-zii-rdu1.dts
> @@ -428,13 +428,13 @@
>  			#size-cells = <0>;
>  			led-control = <0x0 0x0 0x3f83f8 0x0>;
>  
> -			sysled0 {
> +			sysled0 at 3 {
>  				reg = <3>;
>  				label = "system:green:status";
>  				linux,default-trigger = "default-
> on";
>  			};
>  
> -			sysled1 {
> +			sysled1 at 4 {
>  				reg = <4>;
>  				label = "system:green:act";
>  				linux,default-trigger = "heartbeat";