[PATCH v4 6/6] ARM: configs: Add missing config for DART-MX6 SoM
Neil Armstrong
narmstrong at baylibre.com
Fri Dec 1 00:57:26 PST 2017
Hi Shawn,
On 30/11/2017 01:46, Shawn Guo wrote:
> On Wed, Nov 29, 2017 at 11:20:57AM +0100, Neil Armstrong wrote:
>> This patch adds the missing configs for the DART-MX6 SoM support :
>> - SERDEV bluetooth driver + SERIAL_DEV_BUS configs
>> - WL18XX driver
>> - DEFAULT_ON Led Trigger
>>
>> Reviewed-by: Fabio Estevam <fabio.estevam at nxp.com>
>> Signed-off-by: Neil Armstrong <narmstrong at baylibre.com>
>
> 'ARM: imx_v6_v7_defconfig: ...' or 'ARM: imx: defconfig: ...' please.
>
Ok done.
Thanks for the review,
Neil
> Shawn
>
>> ---
>> arch/arm/configs/imx_v6_v7_defconfig | 6 ++++++
>> 1 file changed, 6 insertions(+)
>>
>> diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
>> index 0d44949..abd06c3 100644
>> --- a/arch/arm/configs/imx_v6_v7_defconfig
>> +++ b/arch/arm/configs/imx_v6_v7_defconfig
>> @@ -80,6 +80,7 @@ CONFIG_CAN=y
>> CONFIG_CAN_FLEXCAN=y
>> CONFIG_BT=y
>> CONFIG_BT_HCIUART=y
>> +CONFIG_BT_HCIUART_SERDEV=y
>> CONFIG_BT_HCIUART_H4=y
>> CONFIG_BT_HCIUART_LL=y
>> CONFIG_CFG80211=y
>> @@ -155,6 +156,7 @@ CONFIG_USB_USBNET=y
>> CONFIG_USB_NET_CDC_EEM=m
>> CONFIG_BRCMFMAC=m
>> CONFIG_WL12XX=m
>> +CONFIG_WL18XX=m
>> CONFIG_WLCORE_SDIO=m
>> # CONFIG_WILINK_PLATFORM_DATA is not set
>> CONFIG_INPUT_EVDEV=y
>> @@ -185,6 +187,8 @@ CONFIG_SERIAL_IMX=y
>> CONFIG_SERIAL_IMX_CONSOLE=y
>> CONFIG_SERIAL_FSL_LPUART=y
>> CONFIG_SERIAL_FSL_LPUART_CONSOLE=y
>> +CONFIG_SERIAL_DEV_BUS=y
>> +CONFIG_SERIAL_DEV_CTRL_TTYPORT=y
>> # CONFIG_I2C_COMPAT is not set
>> CONFIG_I2C_CHARDEV=y
>> CONFIG_I2C_MUX=y
>> @@ -248,6 +252,7 @@ CONFIG_VIDEO_OV5640=m
>> CONFIG_SOC_CAMERA_OV2640=y
>> CONFIG_IMX_IPUV3_CORE=y
>> CONFIG_DRM=y
>> +CONFIG_DRM_PANEL_LVDS=y
>> CONFIG_DRM_PANEL_SIMPLE=y
>> CONFIG_DRM_DW_HDMI_AHB_AUDIO=m
>> CONFIG_DRM_DW_HDMI_CEC=y
>> @@ -340,6 +345,7 @@ CONFIG_LEDS_TRIGGER_ONESHOT=y
>> CONFIG_LEDS_TRIGGER_HEARTBEAT=y
>> CONFIG_LEDS_TRIGGER_BACKLIGHT=y
>> CONFIG_LEDS_TRIGGER_GPIO=y
>> +CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
>> CONFIG_RTC_CLASS=y
>> CONFIG_RTC_INTF_DEV_UIE_EMUL=y
>> CONFIG_RTC_DRV_DS1307=y
>> --
>> 2.7.4
>>
More information about the linux-arm-kernel
mailing list