[PATCH v2 0/4] ARM: dts: renesas: Convert to named i2c-gpio bindings

[Simon Horman]

On Thu, Nov 30, 2017 at 01:57:22PM +0100, Geert Uytterhoeven wrote:
> 	Hi Simon, Magnus,
> 
> Commits 7d29f509d2cfd807 ("dt-bindings: i2c: i2c-gpio: Add support for
> named gpios") and 05c74778858d7d99 ("i2c: gpio: Add support for named
> gpios in DT") introduced named i2c-gpio DT bindings, and deprecated the
> more error-prone unnamed variant.
> 
> This patch series switches all Renesas boards to the new bindings, and
> adds the missing GPIO_OPEN_DRAIN I/O flags, which were implicitly
> assumed before.  The latter gets rid of messages like:
> 
>     gpio-208 (?): enforced open drain please flag it properly in DT/ACPI DSDT/board file
>     gpio-91 (?): enforced open drain please flag it properly in DT/ACPI DSDT/board file
> 
> Patch 1 was extracted from series "[PATCH/RFC 0/3] i2c: gpio: Add
> support for named gpios in DT", hence the v2.  All other patches are
> new.
> 
> Note that after this series is applied, the i2c-gpio buses are no longer
> detected when booting new DTBs on old (v4.14 and older) kernels, which
> should not be an issue.  Booting old DTBs on new kernels is not
> affected.
> 
> Thanks for applying!

Thanks, applied.