[PATCH] usb: dwc3: Initialize DMA ops/mask for xhci-hcd
Grygorii Strashko
grygorii.strashko at ti.com
Fri Aug 25 16:03:42 PDT 2017
On 08/25/2017 01:02 PM, Adam Wallis wrote:
> The dma ops from the parent DWC device are not getting passed to the
> child xhci-hcd device. This patch makes use of
> platform_device_register_full to set the DMA ops. For the DT/OF case,
> dma_ops were still null after the the device register, so
> of_dma_configure is called in only the OF case.
>
> Signed-off-by: Adam Wallis <awallis at codeaurora.org>
Hm. There were set of fixes in this area recently which actually removed
settings you are going to restore
4c39d4b usb: xhci: use bus->sysdev for DMA configuration
d64ff40 usb: dwc3: use bus->sysdev for DMA configuration
> ---
> drivers/usb/dwc3/host.c | 39 +++++++++++++++++----------------------
> 1 file changed, 17 insertions(+), 22 deletions(-)
>
> diff --git a/drivers/usb/dwc3/host.c b/drivers/usb/dwc3/host.c
> index 76f0b0d..662e9e2 100644
> --- a/drivers/usb/dwc3/host.c
> +++ b/drivers/usb/dwc3/host.c
> @@ -16,6 +16,7 @@
> */
>
> #include <linux/platform_device.h>
> +#include <linux/of_platform.h>
>
> #include "core.h"
>
> @@ -56,6 +57,7 @@ int dwc3_host_init(struct dwc3 *dwc)
> {
> struct property_entry props[3];
> struct platform_device *xhci;
> + struct platform_device_info dwc_plat_info = {};
> int ret, irq;
> struct resource *res;
> struct platform_device *dwc3_pdev = to_platform_device(dwc->dev);
> @@ -79,22 +81,22 @@ int dwc3_host_init(struct dwc3 *dwc)
> dwc->xhci_resources[1].flags = res->flags;
> dwc->xhci_resources[1].name = res->name;
>
> - xhci = platform_device_alloc("xhci-hcd", PLATFORM_DEVID_AUTO);
> - if (!xhci) {
> - dev_err(dwc->dev, "couldn't allocate xHCI device\n");
> - return -ENOMEM;
> - }
> + dwc_plat_info.name = "xhci-hcd";
> + dwc_plat_info.parent = dwc->dev;
> + dwc_plat_info.res = dwc->xhci_resources;
> + dwc_plat_info.num_res = DWC3_XHCI_RESOURCES_NUM;
> + dwc_plat_info.fwnode = dwc->dev->fwnode;
> + dwc_plat_info.dma_mask = *dwc->dev->dma_mask;
>
> - xhci->dev.parent = dwc->dev;
> + xhci = platform_device_register_full(&dwc_plat_info);
> + if (IS_ERR(xhci)) {
> + dev_err(dwc->dev, "failed to register xHCI device\n");
> + return PTR_ERR(xhci);
> + }
>
> dwc->xhci = xhci;
> -
> - ret = platform_device_add_resources(xhci, dwc->xhci_resources,
> - DWC3_XHCI_RESOURCES_NUM);
> - if (ret) {
> - dev_err(dwc->dev, "couldn't add resources to xHCI device\n");
> - goto err1;
> - }
> + if (dwc->dev->of_node)
> + of_dma_configure(&xhci->dev, dwc->dev->of_node);
>
> memset(props, 0, sizeof(struct property_entry) * ARRAY_SIZE(props));
>
> @@ -117,7 +119,7 @@ int dwc3_host_init(struct dwc3 *dwc)
> ret = platform_device_add_properties(xhci, props);
> if (ret) {
> dev_err(dwc->dev, "failed to add properties to xHCI\n");
> - goto err1;
> + goto err;
> }
> }
>
> @@ -126,19 +128,12 @@ int dwc3_host_init(struct dwc3 *dwc)
> phy_create_lookup(dwc->usb3_generic_phy, "usb3-phy",
> dev_name(dwc->dev));
>
> - ret = platform_device_add(xhci);
> - if (ret) {
> - dev_err(dwc->dev, "failed to register xHCI device\n");
> - goto err2;
> - }
> -
> return 0;
> -err2:
> +err:
> phy_remove_lookup(dwc->usb2_generic_phy, "usb2-phy",
> dev_name(dwc->dev));
> phy_remove_lookup(dwc->usb3_generic_phy, "usb3-phy",
> dev_name(dwc->dev));
> -err1:
> platform_device_put(xhci);
> return ret;
> }
>
--
regards,
-grygorii
More information about the linux-arm-kernel
mailing list