[EXT] Re: [PATCH net-next 10/18] net: mvpp2: use the GoP interrupt for link status changes

[Antoine Tenart]

Hi Marcin,

On Wed, Aug 23, 2017 at 11:05:33PM +0200, Marcin Wojtas wrote:
> 2017-08-23 18:04 GMT+02:00 Antoine Tenart <antoine.tenart at free-electrons.com>:
> > On Wed, Aug 23, 2017 at 03:24:55PM +0000, Stefan Chulski wrote:
> >> > When the cable is connected (there is signal) and the serdes is in sync and AN
> >> > succeeded.
> >> >
> >> > > With SFF/SFP ports, you generally need a gpio line the fibre module
> >> > > can use to indicate if it has link. Fixed-phy has such support, and
> >> > > your link_change function will get called when the link changes.
> >> >
> >> > So that would work when using SFP modules but I wonder if the GoP irq isn't
> >> > needed when using passive cable, in which case this patch would still be needed
> >> > (and of course we should support the new Russell phylib capabilities).
> >>
> >> Even if new phylib driver supports passive direct cables connection,
> >> GoP IRQ required for SOHO/Peridot external switch support.
> >> SOHO/Peridot external switch could be connected directly to Serdes line.
> >
> > So I guess the GoP link irq patches are needed. Should I resend them
> > then?
> >
> > We'll have to discuss how to handle fixed-phy vs GoP IRQ, but I guess we
> > can do this when adding the fixed-phy support later.
> >
> 
> Please check mvneta.c - you can find there coexistence of normal
> libphy support, fixed phy and link irq for the inband management mode.
> IMO it's exactly, what you need here.

From what I see it should be pretty easy to support phy, fixed-phy and
the GoP irq without breaking anything: if no phy is found in the dt,
call of_phy_register_fixed_link() and if the fixed-phy property isn't
found either use the GoP link IRQ. This way all the possibilities would
be supported.

So we should be able to support fixed-phy in a future series.

Antoine

-- 
Antoine Ténart, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20170824/10943327/attachment.sig>