[PATCH net-next v2 06/10] net: mvpp2: set maximum packet size for 10G ports
Antoine Tenart
antoine.tenart at free-electrons.com
Tue Aug 22 10:08:26 PDT 2017
From: Stefan Chulski <stefanc at marvell.com>
Set maximum packet size for XLG 10G ports. Missing maximum packet size
for XLG configuration will cause kernel panic if oversized packet is
received by port.
Signed-off-by: Stefan Chulski <stefanc at marvell.com>
Signed-off-by: Antoine Tenart <antoine.tenart at free-electrons.com>
---
drivers/net/ethernet/marvell/mvpp2.c | 24 ++++++++++++++++++++++--
1 file changed, 22 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/marvell/mvpp2.c b/drivers/net/ethernet/marvell/mvpp2.c
index 64e0a1bae7d0..b2d2b4c9d5af 100644
--- a/drivers/net/ethernet/marvell/mvpp2.c
+++ b/drivers/net/ethernet/marvell/mvpp2.c
@@ -363,7 +363,9 @@
#define MVPP22_XLG_CTRL0_MAC_RESET_DIS BIT(1)
#define MVPP22_XLG_CTRL0_RX_FLOW_CTRL_EN BIT(7)
#define MVPP22_XLG_CTRL0_MIB_CNT_DIS BIT(14)
-
+#define MVPP22_XLG_CTRL1_REG 0x104
+#define MVPP22_XLG_CTRL1_FRAMESIZELIMIT BIT(0)
+#define MVPP22_XLG_CTRL1_FRAMESIZELIMIT_MASK 0x1fff
#define MVPP22_XLG_CTRL3_REG 0x11c
#define MVPP22_XLG_CTRL3_MACMODESELECT_MASK (7 << 13)
#define MVPP22_XLG_CTRL3_MACMODESELECT_GMAC (0 << 13)
@@ -4498,6 +4500,18 @@ static inline void mvpp2_gmac_max_rx_size_set(struct mvpp2_port *port)
writel(val, port->base + MVPP2_GMAC_CTRL_0_REG);
}
+/* Change maximum receive size of the port */
+static inline void mvpp2_xlg_max_rx_size_set(struct mvpp2_port *port)
+{
+ u32 val;
+
+ val = readl(port->base + MVPP22_XLG_CTRL1_REG);
+ val &= ~MVPP22_XLG_CTRL1_FRAMESIZELIMIT_MASK;
+ val |= ((port->pkt_size - MVPP2_MH_SIZE) / 2) <<
+ MVPP22_XLG_CTRL1_FRAMESIZELIMIT;
+ writel(val, port->base + MVPP22_XLG_CTRL1_REG);
+}
+
/* Set defaults to the MVPP2 port */
static void mvpp2_defaults_set(struct mvpp2_port *port)
{
@@ -6076,7 +6090,13 @@ static void mvpp2_start_dev(struct mvpp2_port *port)
struct net_device *ndev = port->dev;
int i;
- mvpp2_gmac_max_rx_size_set(port);
+ if (port->gop_id == 0 &&
+ (port->phy_interface == PHY_INTERFACE_MODE_XAUI ||
+ port->phy_interface == PHY_INTERFACE_MODE_10GKR))
+ mvpp2_xlg_max_rx_size_set(port);
+ else
+ mvpp2_gmac_max_rx_size_set(port);
+
mvpp2_txp_max_tx_size_set(port);
for (i = 0; i < port->nqvecs; i++)
--
2.13.5
More information about the linux-arm-kernel
mailing list