[PATCH v2] perf tools: Add ARM Statistical Profiling Extensions (SPE) support
Kim Phillips
kim.phillips at arm.com
Mon Aug 21 16:18:21 PDT 2017
On Fri, 18 Aug 2017 18:36:09 +0100
Mark Rutland <mark.rutland at arm.com> wrote:
> Hi Kim,
Hi Mark,
> On Thu, Aug 17, 2017 at 10:11:50PM -0500, Kim Phillips wrote:
> > Hi Mark, I've tried to proceed as much as possible without your
> > response, so if you still have comments to my above comments, please
> > comment in-line above, otherwise review the v2 patch below?
>
> Apologies again for the late response, and thanks for the updated patch!
Thanks for your prompt response this time around.
> > .
> > . ... ARM SPE data: size 536432 bytes
> > . 00000000: 4a 01 B COND
> > . 00000002: b1 00 00 00 00 00 00 00 80 TGT 0 el0 ns=1
> > . 0000000b: 42 42 RETIRED NOT-TAKEN
> > . 0000000d: b0 20 41 c0 ad ff ff 00 80 PC ffffadc04120 el0 ns=1
> > . 00000016: 98 00 00 LAT 0 TOT
> > . 00000019: 71 80 3e f7 46 e9 01 00 00 TS 2101429616256
> > . 00000022: 49 01 ST
> > . 00000024: b2 50 bd ba 73 00 80 ff ff VA ffff800073babd50
> > . 0000002d: b3 50 bd ba f3 00 00 00 80 PA f3babd50 ns=1
> > . 00000036: 9a 00 00 LAT 0 XLAT
> > . 00000039: 42 16 RETIRED L1D-ACCESS TLB-ACCESS
> > . 0000003b: b0 8c b4 1e 08 00 00 ff ff PC ff0000081eb48c el3 ns=1
> > . 00000044: 98 00 00 LAT 0 TOT
> > . 00000047: 71 cc 44 f7 46 e9 01 00 00 TS 2101429617868
> > . 00000050: 48 00 INSN-OTHER
> > . 00000052: 42 02 RETIRED
> > . 00000054: b0 58 54 1f 08 00 00 ff ff PC ff0000081f5458 el3 ns=1
> > . 0000005d: 98 00 00 LAT 0 TOT
> > . 00000060: 71 cc 44 f7 46 e9 01 00 00 TS 2101429617868
>
> So FWIW, I think this is a good example of why that padding I requested
> last time round matters.
>
> For the first PC packet, I had to count the number of characters to see
> that it was a TTBR0 address, which is made much clearer with leading
> padding, as 0000ffffadc04120. With the addresses padded, the EL and NS
> fields would also be aligned, making it *much* easier to scan by eye.
See my response in my prior email.
> > - multiple SPE clusters/domains support pending potential driver changes?
>
> As covered in my other reply, I don't believe that the driver is going
> to change in this regard. Userspace will need to handle multiple SPE
> instances.
>
> I'll ignore that in the code below for now.
Please let's continue the discussion in one place, and again in this
case, in the last email.
> > - CPU mask / new record behaviour bisected to commit e3ba76deef23064 "perf
> > tools: Force uncore events to system wide monitoring". Waiting to hear back
> > on why driver can't do system wide monitoring, even across PPIs, by e.g.,
> > sharing the SPE interrupts in one handler (SPE's don't differ in this record
> > regard).
>
> Could you elaborate on this? I don't follow the interrupt handler
> comments.
Would it be possible for the driver to request the IRQs with
IRQF_SHARED, in order to be able to operate across the multiple PPIs?
> > +static u64 arm_spe_reference(struct auxtrace_record *itr __maybe_unused)
> > +{
> > + u64 ts;
> > +
> > + asm volatile ("isb; mrs %0, cntvct_el0" : "=r" (ts));
> > +
> > + return ts;
> > +}
>
> As covered in my other reply, please don't use the counter for this.
>
> It sounds like we need a simple/generic function to get a nonce, that
> we could share with the ETM code.
I've switched to using clock_gettime(CLOCK_MONOTONIC_RAW, ...). The
ETM code uses two rand() calls, which, according to some minor
benchmarking on Juno, is almost twice as slow as clock_gettime. It's
three lines still, so I'll update the ETM code in-place independently
of this patch, and after the gettime implementation is reviewed.
> > +int arm_spe_get_packet(const unsigned char *buf, size_t len,
> > + struct arm_spe_pkt *packet)
> > +{
> > + int ret;
> > +
> > + ret = arm_spe_do_get_packet(buf, len, packet);
> > + if (ret > 0 && packet->type == ARM_SPE_PAD) {
> > + while (ret < 16 && len > (size_t)ret && !buf[ret])
> > + ret += 1;
> > + }
> > + return ret;
> > +}
>
> What's this doing? Skipping padding? What's the significance of 16?
I'll repeat the relevant part of the v2 changelog here:
- do_get_packet fixed to handle excessive, successive PADding from a new source
of raw SPE data, so instead of:
. 000011ae: 00 PAD
. 000011af: 00 PAD
. 000011b0: 00 PAD
. 000011b1: 00 PAD
. 000011b2: 00 PAD
. 000011b3: 00 PAD
. 000011b4: 00 PAD
. 000011b5: 00 PAD
. 000011b6: 00 PAD
we now get:
. 000011ae: 00 00 00 00 00 00 00 00 00 PAD
...the 16 is the width of the dump format: max. 16 byte being displayed
per line: I'll add a comment as such.
> > +int arm_spe_pkt_desc(const struct arm_spe_pkt *packet, char *buf,
> > + size_t buf_len)
> > +{
> > + int ret, ns, el, index = packet->index;
> > + unsigned long long payload = packet->payload;
> > + const char *name = arm_spe_pkt_name(packet->type);
> > +
> > + switch (packet->type) {
> > + case ARM_SPE_BAD:
> > + case ARM_SPE_PAD:
> > + case ARM_SPE_END:
> > + return snprintf(buf, buf_len, "%s", name);
> > + case ARM_SPE_EVENTS: {
> > + size_t blen = buf_len;
> > +
> > + ret = 0;
> > + ret = snprintf(buf, buf_len, "EV");
> > + buf += ret;
> > + blen -= ret;
> > + if (payload & 0x1) {
> > + ret = snprintf(buf, buf_len, " EXCEPTION-GEN");
> > + buf += ret;
> > + blen -= ret;
> > + }
> > + if (payload & 0x2) {
> > + ret = snprintf(buf, buf_len, " RETIRED");
> > + buf += ret;
> > + blen -= ret;
> > + }
> > + if (payload & 0x4) {
> > + ret = snprintf(buf, buf_len, " L1D-ACCESS");
> > + buf += ret;
> > + blen -= ret;
> > + }
> > + if (payload & 0x8) {
> > + ret = snprintf(buf, buf_len, " L1D-REFILL");
> > + buf += ret;
> > + blen -= ret;
> > + }
> > + if (payload & 0x10) {
> > + ret = snprintf(buf, buf_len, " TLB-ACCESS");
> > + buf += ret;
> > + blen -= ret;
> > + }
> > + if (payload & 0x20) {
> > + ret = snprintf(buf, buf_len, " TLB-REFILL");
> > + buf += ret;
> > + blen -= ret;
> > + }
> > + if (payload & 0x40) {
> > + ret = snprintf(buf, buf_len, " NOT-TAKEN");
> > + buf += ret;
> > + blen -= ret;
> > + }
> > + if (payload & 0x80) {
> > + ret = snprintf(buf, buf_len, " MISPRED");
> > + buf += ret;
> > + blen -= ret;
> > + }
> > + if (index > 1) {
> > + if (payload & 0x100) {
> > + ret = snprintf(buf, buf_len, " LLC-ACCESS");
> > + buf += ret;
> > + blen -= ret;
> > + }
> > + if (payload & 0x200) {
> > + ret = snprintf(buf, buf_len, " LLC-REFILL");
> > + buf += ret;
> > + blen -= ret;
> > + }
> > + if (payload & 0x400) {
> > + ret = snprintf(buf, buf_len, " REMOTE-ACCESS");
> > + buf += ret;
> > + blen -= ret;
> > + }
> > + }
> > + if (ret < 0)
> > + return ret;
> > + blen -= ret;
> > + return buf_len - blen;
> > + }
>
> This looks like it could be turned into another switch, sharing the
> repeated logic.
How, if the payload may have multiple bits set?
I've addressed the rest of your comments and therefore trimmed them
out. I can post a v3, but would rather shake out the pending issues
first, so please reply to my comments on this and Friday's email (Date:
Fri, 18 Aug 2017 17:22:48 -0500).
Thanks,
Kim
More information about the linux-arm-kernel
mailing list