[PATCH v2 4/9] ARM64: dts: meson-gxbb: nanopi-k2: add card regulator settle times

[Jerome Brunet]

Changing the card voltage on the nanopi-k2 is not instantaneous,
especially when switching from 3.3v to 1.8v.

It take at least 3ms for the regulator to go from 3.3v to 1.8v. Add
margin to that to make sure we don't upset the sdcard during the voltage
switch

Fixes: 9bc7ffb08daf ("arm64: dts: amlogic: Add NanoPi K2")
Signed-off-by: Jerome Brunet <jbrunet at baylibre.com>
---
 arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts
index e4c6b2fd52ee..de4ed28d78bc 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts
@@ -107,6 +107,9 @@
 
 		states = <3300000 0>,
 		         <1800000 1>;
+
+		regulator-settling-time-up-us = <100>;
+		regulator-settling-time-down-us = <5000>;
 	};
 
 	wifi_32k: wifi-32k {
-- 
2.9.5