[PATCH 07/27] arm64/sve: Low-level SVE architectural state manipulation functions
Alex Bennée
alex.bennee at linaro.org
Mon Aug 21 03:11:48 PDT 2017
Dave Martin <Dave.Martin at arm.com> writes:
> Manipulating the SVE architectural state, including the vector and
> predicate registers, first-fault register and the vector length,
> requires the use of dedicated instructions added by SVE.
>
> This patch adds suitable assembly functions for saving and
> restoring the SVE registers and querying the vector length.
> Setting of the vector length is done as part of register restore.
>
> Since people building kernels may not all get an SVE-enabled
> toolchain for a while, this patch uses macros that generate
> explicit opcodes in place of assembler mnemonics.
>
> Signed-off-by: Dave Martin <Dave.Martin at arm.com>
> ---
> arch/arm64/include/asm/fpsimd.h | 5 ++
> arch/arm64/include/asm/fpsimdmacros.h | 137 ++++++++++++++++++++++++++++++++++
> arch/arm64/kernel/entry-fpsimd.S | 17 +++++
> 3 files changed, 159 insertions(+)
>
> diff --git a/arch/arm64/include/asm/fpsimd.h b/arch/arm64/include/asm/fpsimd.h
> index 410c481..026a7c7 100644
> --- a/arch/arm64/include/asm/fpsimd.h
> +++ b/arch/arm64/include/asm/fpsimd.h
> @@ -67,6 +67,11 @@ extern void fpsimd_update_current_state(struct fpsimd_state *state);
>
> extern void fpsimd_flush_task_state(struct task_struct *target);
>
> +extern void sve_save_state(void *state, u32 *pfpsr);
> +extern void sve_load_state(void const *state, u32 const *pfpsr,
> + unsigned long vq_minus_1);
> +extern unsigned int sve_get_vl(void);
> +
> /* For use by EFI runtime services calls only */
> extern void __efi_fpsimd_begin(void);
> extern void __efi_fpsimd_end(void);
> diff --git a/arch/arm64/include/asm/fpsimdmacros.h b/arch/arm64/include/asm/fpsimdmacros.h
> index 0f5fdd3..5023064 100644
> --- a/arch/arm64/include/asm/fpsimdmacros.h
> +++ b/arch/arm64/include/asm/fpsimdmacros.h
> @@ -75,3 +75,140 @@
> ldr w\tmpnr, [\state, #16 * 2 + 4]
> fpsimd_restore_fpcr x\tmpnr, \state
> .endm
> +
> +.macro _check_general_reg nr
> + .if (\nr) < 0 || (\nr) > 30
> + .error "Bad register number \nr."
> + .endif
> +.endm
> +
> +.macro _sve_check_zreg znr
> + .if (\znr) < 0 || (\znr) > 31
> + .error "Bad Scalable Vector Extension vector register number \znr."
> + .endif
> +.endm
> +
> +.macro _sve_check_preg pnr
> + .if (\pnr) < 0 || (\pnr) > 15
> + .error "Bad Scalable Vector Extension predicate register number \pnr."
> + .endif
> +.endm
> +
> +.macro _check_num n, min, max
> + .if (\n) < (\min) || (\n) > (\max)
> + .error "Number \n out of range [\min,\max]"
> + .endif
> +.endm
> +
> +.macro _sve_str_v nz, nxbase, offset=0
> + _sve_check_zreg \nz
> + _check_general_reg \nxbase
> + _check_num (\offset), -0x100, 0xff
> + .inst 0xe5804000 \
> + | (\nz) \
> + | ((\nxbase) << 5) \
> + | (((\offset) & 7) << 10) \
> + | (((\offset) & 0x1f8) << 13)
> +.endm
Can we have references to the ARM ARM titles (the section numbers keep
changing) for each hand-hacked instruction please. Otherwise it is
impossible to verify each one.
> +
> +.macro _sve_ldr_v nz, nxbase, offset=0
> + _sve_check_zreg \nz
> + _check_general_reg \nxbase
> + _check_num (\offset), -0x100, 0xff
> + .inst 0x85804000 \
> + | (\nz) \
> + | ((\nxbase) << 5) \
> + | (((\offset) & 7) << 10) \
> + | (((\offset) & 0x1f8) << 13)
> +.endm
> +
> +.macro _sve_str_p np, nxbase, offset=0
> + _sve_check_preg \np
> + _check_general_reg \nxbase
> + _check_num (\offset), -0x100, 0xff
> + .inst 0xe5800000 \
> + | (\np) \
> + | ((\nxbase) << 5) \
> + | (((\offset) & 7) << 10) \
> + | (((\offset) & 0x1f8) << 13)
> +.endm
> +
> +.macro _sve_ldr_p np, nxbase, offset=0
> + _sve_check_preg \np
> + _check_general_reg \nxbase
> + _check_num (\offset), -0x100, 0xff
> + .inst 0x85800000 \
> + | (\np) \
> + | ((\nxbase) << 5) \
> + | (((\offset) & 7) << 10) \
> + | (((\offset) & 0x1f8) << 13)
> +.endm
> +
> +.macro _sve_rdvl nx, imm
> + _check_general_reg \nx
> + _check_num (\imm), -0x20, 0x1f
> + .inst 0x04bf5000 \
> + | (\nx) \
> + | (((\imm) & 0x3f) << 5)
> +.endm
> +
> +.macro _sve_rdffr np
> + _sve_check_preg \np
> + .inst 0x2519f000 \
> + | (\np)
> +.endm
> +
> +.macro _sve_wrffr np
> + _sve_check_preg \np
> + .inst 0x25289000 \
> + | ((\np) << 5)
> +.endm
> +
> +.macro __for from:req, to:req
> + .if (\from) == (\to)
> + _for__body \from
> + .else
> + __for \from, (\from) + ((\to) - (\from)) / 2
> + __for (\from) + ((\to) - (\from)) / 2 + 1, \to
> + .endif
> +.endm
> +
> +.macro _for var:req, from:req, to:req, insn:vararg
> + .macro _for__body \var:req
> + \insn
> + .endm
> +
> + __for \from, \to
> +
> + .purgem _for__body
> +.endm
> +
> +.macro sve_save nxbase, xpfpsr, nxtmp
> + _for n, 0, 31, _sve_str_v \n, \nxbase, \n - 34
> + _for n, 0, 15, _sve_str_p \n, \nxbase, \n - 16
> + _sve_rdffr 0
> + _sve_str_p 0, \nxbase
> + _sve_ldr_p 0, \nxbase, -16
> +
> + mrs x\nxtmp, fpsr
> + str w\nxtmp, [\xpfpsr]
> + mrs x\nxtmp, fpcr
> + str w\nxtmp, [\xpfpsr, #4]
> +.endm
> +
> +.macro sve_load nxbase, xpfpsr, xvqminus1, nxtmp
> + mrs_s x\nxtmp, SYS_ZCR_EL1
> + bic x\nxtmp, x\nxtmp, ZCR_ELx_LEN_MASK
> + orr x\nxtmp, x\nxtmp, \xvqminus1
> + msr_s SYS_ZCR_EL1, x\nxtmp // self-synchronising
> +
> + _for n, 0, 31, _sve_ldr_v \n, \nxbase, \n - 34
> + _sve_ldr_p 0, \nxbase
> + _sve_wrffr 0
> + _for n, 0, 15, _sve_ldr_p \n, \nxbase, \n - 16
> +
> + ldr w\nxtmp, [\xpfpsr]
> + msr fpsr, x\nxtmp
> + ldr w\nxtmp, [\xpfpsr, #4]
> + msr fpcr, x\nxtmp
> +.endm
> diff --git a/arch/arm64/kernel/entry-fpsimd.S b/arch/arm64/kernel/entry-fpsimd.S
> index 6a27cd6..73f17bf 100644
> --- a/arch/arm64/kernel/entry-fpsimd.S
> +++ b/arch/arm64/kernel/entry-fpsimd.S
> @@ -41,3 +41,20 @@ ENTRY(fpsimd_load_state)
> fpsimd_restore x0, 8
> ret
> ENDPROC(fpsimd_load_state)
> +
> +#ifdef CONFIG_ARM64_SVE
> +ENTRY(sve_save_state)
> + sve_save 0, x1, 2
> + ret
> +ENDPROC(sve_save_state)
> +
> +ENTRY(sve_load_state)
> + sve_load 0, x1, x2, 3
> + ret
> +ENDPROC(sve_load_state)
> +
> +ENTRY(sve_get_vl)
> + _sve_rdvl 0, 1
> + ret
> +ENDPROC(sve_get_vl)
> +#endif /* CONFIG_ARM64_SVE */
--
Alex Bennée
More information about the linux-arm-kernel
mailing list