[PATCH 2/3] ARM: dts: rockchip: add usb nodes for rv1108 SoCs
Frank Wang
frank.wang at rock-chips.com
Mon Aug 21 01:39:27 PDT 2017
This patch adds usb otg/host controllers and phys nodes for RV1108 SoCs.
Signed-off-by: Frank Wang <frank.wang at rock-chips.com>
---
arch/arm/boot/dts/rv1108.dtsi | 73 ++++++++++++++++++++++++++++++++++++++++++-
1 file changed, 72 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/rv1108.dtsi b/arch/arm/boot/dts/rv1108.dtsi
index 25fab0b..2322328 100644
--- a/arch/arm/boot/dts/rv1108.dtsi
+++ b/arch/arm/boot/dts/rv1108.dtsi
@@ -262,8 +262,35 @@
};
grf: syscon at 10300000 {
- compatible = "rockchip,rv1108-grf", "syscon";
+ compatible = "rockchip,rv1108-grf", "syscon", "simple-mfd";
reg = <0x10300000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ u2phy: usb2-phy at 100 {
+ compatible = "rockchip,rv1108-usb2phy";
+ reg = <0x100 0x0c>;
+ rockchip,usbgrf = <&usbgrf>;
+ clocks = <&cru SCLK_USBPHY>;
+ clock-names = "phyclk";
+ #clock-cells = <0>;
+ clock-output-names = "usbphy";
+ status = "disabled";
+
+ u2phy_otg: otg-port {
+ #phy-cells = <0>;
+ interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "otg-mux";
+ status = "disabled";
+ };
+
+ u2phy_host: host-port {
+ #phy-cells = <0>;
+ interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "linestate";
+ status = "disabled";
+ };
+ };
};
watchdog: wdt at 10360000 {
@@ -353,6 +380,11 @@
reg = <0x20060000 0x1000>;
};
+ usbgrf: syscon at 202a0000 {
+ compatible = "rockchip,rv1108-usbgrf", "syscon";
+ reg = <0x202a0000 0x1000>;
+ };
+
cru: clock-controller at 20200000 {
compatible = "rockchip,rv1108-cru";
reg = <0x20200000 0x1000>;
@@ -399,6 +431,45 @@
status = "disabled";
};
+ usb_host_ehci: usb at 30140000 {
+ compatible = "generic-ehci";
+ reg = <0x30140000 0x20000>;
+ interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru HCLK_HOST0>, <&u2phy>;
+ clock-names = "usbhost", "utmi";
+ phys = <&u2phy_host>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
+ usb_host_ohci: usb at 30160000 {
+ compatible = "generic-ohci";
+ reg = <0x30160000 0x20000>;
+ interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru HCLK_HOST0>, <&u2phy>;
+ clock-names = "usbhost", "utmi";
+ phys = <&u2phy_host>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
+ usb_otg: usb at 30180000 {
+ compatible = "rockchip,rv1108-usb", "rockchip,rk3066-usb",
+ "snps,dwc2";
+ reg = <0x30180000 0x40000>;
+ interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru HCLK_OTG>;
+ clock-names = "otg";
+ dr_mode = "otg";
+ g-np-tx-fifo-size = <16>;
+ g-rx-fifo-size = <280>;
+ g-tx-fifo-size = <256 128 128 64 32 16>;
+ g-use-dma;
+ phys = <&u2phy_otg>;
+ phy-names = "usb2-phy";
+ status = "disabled";
+ };
+
gic: interrupt-controller at 32010000 {
compatible = "arm,gic-400";
interrupt-controller;
--
2.0.0
More information about the linux-arm-kernel
mailing list