[PATCH 2/3] ARM: dts: iwg20m: Enable SDHI0 controller

[Biju Das]

> -----Original Message-----
> From: Wolfram Sang [mailto:wsa at the-dreams.de]
> Sent: 21 August 2017 09:29
> To: Biju Das <biju.das at bp.renesas.com>
> Cc: Rob Herring <robh+dt at kernel.org>; Mark Rutland
> <mark.rutland at arm.com>; Simon Horman <horms at verge.net.au>; Magnus
> Damm <magnus.damm at gmail.com>; Chris Paterson
> <Chris.Paterson2 at renesas.com>; Wolfram Sang <wsa+renesas at sang-
> engineering.com>; devicetree at vger.kernel.org; linux-renesas-
> soc at vger.kernel.org; linux-arm-kernel at lists.infradead.org
> Subject: Re: [PATCH 2/3] ARM: dts: iwg20m: Enable SDHI0 controller
>
> > +
> > +&sdhi0 {
> > +pinctrl-0 = <&sdhi0_pins>;
> > +pinctrl-names = "default";
> > +
> > +vmmc-supply = <&reg_3p3v>;
> > +vqmmc-supply = <&reg_3p3v>;
> > +cd-gpios = <&gpio7 11 GPIO_ACTIVE_LOW>;
> > +status = "okay";
> > +};
>
> Just to make sure: No 1.8V and UHS support (SDR50/104)? Or is this to be
> tested and added later?

Thanks. The current hardware doesn't support 1.8V switching for SDHI0. There is a plan to
add this in future board varient, at that time we will add UHS support.







Renesas Electronics Europe Ltd, Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, UK. Registered in England & Wales under Registered No. 04586709.