[PATCH v2 0/6] net: stmmac: Detect PHY location with phy-is-integrated

[Corentin Labbe]

On Thu, Aug 17, 2017 at 09:51:43AM +0200, Corentin Labbe wrote:
> Hello
> 
> The current way to find if the phy is internal is to compare DT phy-mode
> and emac_variant/internal_phy.
> But it will negate a possible future SoC where an external PHY use the
> same phy mode than the integrated one.
> 
> This patchs series adds a new way to find if the PHY is integrated, via
> the phy-is-integrated DT property.
> 
> Since it exists both integrated and external ethernet-phy at 1, they are merged in
> the final DTB and so share all properties.
> For avoiding this, the phy-is-integrated is added only to board DT.
> 
> The first five patchs should go via the sunxi tree.
> the last one should go via the net tree.
> Note that this serie will need backporting the patch
> "Documentation: net: phy: Add phy-is-integrated binding" which is in net-next
> 
> Thanks
> Regards
> 
> Changes since v1:
> - Dropped phy-is-integrated documentation patch since another same patch was already merged
> - Moved phy-is-integrated from SoC dtsi to final board DT.
> 
> Corentin Labbe (6):
>   ARM: sun8i: orangepipc: Set phy-is-integrated to the internal phy node
>   ARM: sun8i: beelink-x2: Set phy-is-integrated to the internal phy node
>   ARM: sun8i: nanopi-neo: Set phy-is-integrated to the internal phy node
>   ARM: sun8i: orangepi-2: Set phy-is-integrated to the internal phy node
>   ARM: sun8i: orangepi-one: Set phy-is-integrated to the internal phy
>     node
>   net: stmmac: dwmac-sun8i: choose internal PHY via phy-is-integrated
> 
>  arch/arm/boot/dts/sun8i-h3-beelink-x2.dts         |  4 ++++
>  arch/arm/boot/dts/sun8i-h3-nanopi-neo.dts         |  4 ++++
>  arch/arm/boot/dts/sun8i-h3-orangepi-2.dts         |  4 ++++
>  arch/arm/boot/dts/sun8i-h3-orangepi-one.dts       |  4 ++++
>  arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts        |  4 ++++
>  drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c | 16 ++++++++--------
>  6 files changed, 28 insertions(+), 8 deletions(-)
> 
> -- 
> 2.13.0
> 

Hello

Self NACK, the comment from Rob on previous series is pertinent.
I will send a v3 which use a mdio-mux for solving all problems.

Regards