[PATCH 5/9] arm64: dts: r8a7796: add USB2.0 Host (EHCI/OHCI) device nodes
Simon Horman
horms+renesas at verge.net.au
Fri Aug 18 01:19:35 PDT 2017
From: Yoshihiro Shimoda <yoshihiro.shimoda.uh at renesas.com>
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh at renesas.com>
Signed-off-by: Simon Horman <horms+renesas at verge.net.au>
---
arch/arm64/boot/dts/renesas/r8a7796.dtsi | 42 +++++++++++++++++++++++++++++---
1 file changed, 38 insertions(+), 4 deletions(-)
diff --git a/arch/arm64/boot/dts/renesas/r8a7796.dtsi b/arch/arm64/boot/dts/renesas/r8a7796.dtsi
index efaf941837ac..5301bfce15d5 100644
--- a/arch/arm64/boot/dts/renesas/r8a7796.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a7796.dtsi
@@ -1232,11 +1232,28 @@
};
ohci0: usb at ee080000 {
- /* placeholder */
+ compatible = "generic-ohci";
+ reg = <0 0xee080000 0 0x100>;
+ interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 703>;
+ phys = <&usb2_phy0>;
+ phy-names = "usb";
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 703>;
+ status = "disabled";
};
ehci0: usb at ee080100 {
- /* placeholder */
+ compatible = "generic-ehci";
+ reg = <0 0xee080100 0 0x100>;
+ interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 703>;
+ phys = <&usb2_phy0>;
+ phy-names = "usb";
+ companion= <&ohci0>;
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 703>;
+ status = "disabled";
};
usb2_phy0: usb-phy at ee080200 {
@@ -1252,11 +1269,28 @@
};
ohci1: usb at ee0a0000 {
- /* placeholder */
+ compatible = "generic-ohci";
+ reg = <0 0xee0a0000 0 0x100>;
+ interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 702>;
+ phys = <&usb2_phy1>;
+ phy-names = "usb";
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 702>;
+ status = "disabled";
};
ehci1: usb at ee0a0100 {
- /* placeholder */
+ compatible = "generic-ehci";
+ reg = <0 0xee0a0100 0 0x100>;
+ interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 702>;
+ phys = <&usb2_phy1>;
+ phy-names = "usb";
+ companion= <&ohci1>;
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 702>;
+ status = "disabled";
};
usb2_phy1: usb-phy at ee0a0200 {
--
2.1.4
More information about the linux-arm-kernel
mailing list