[PATCH 3/3] ARM: OMAP5: Enable CPU off idle states
Tony Lindgren
tony at atomide.com
Thu Aug 17 16:01:22 PDT 2017
With the idle code in place needed for supporting off mode for cpus,
let's enable it. This seems to save about 0.2W of power compared to
CPU retention states based on quick measurement on omap5-uevm.
Some parts of the code is based on an earlier patch done by Santosh
Shilimkar <santosh.shilimkar at oracle.com> in TI Linux kernel tree as
commit 7e3035cf0e9b ("ARM: OMAP4+: CPUidle: Add OMAP5 idle driver
support")
Cc: Dave Gerlach <d-gerlach at ti.com>
Cc: Nishanth Menon <nm at ti.com>
Cc: Santosh Shilimkar <santosh.shilimkar at oracle.com>
Cc: Tero Kristo <t-kristo at ti.com>
Signed-off-by: Tony Lindgren <tony at atomide.com>
---
arch/arm/mach-omap2/cpuidle44xx.c | 14 ++++++++++++++
arch/arm/mach-omap2/pm44xx.c | 2 +-
arch/arm/mach-omap2/powerdomains54xx_data.c | 10 +++++-----
3 files changed, 20 insertions(+), 6 deletions(-)
diff --git a/arch/arm/mach-omap2/cpuidle44xx.c b/arch/arm/mach-omap2/cpuidle44xx.c
--- a/arch/arm/mach-omap2/cpuidle44xx.c
+++ b/arch/arm/mach-omap2/cpuidle44xx.c
@@ -63,6 +63,11 @@ static struct idle_statedata omap5_idle_data[] = {
.mpu_state = PWRDM_POWER_RET,
.mpu_logic_state = PWRDM_POWER_RET,
},
+ {
+ .cpu_state = PWRDM_POWER_OFF,
+ .mpu_state = PWRDM_POWER_RET,
+ .mpu_logic_state = PWRDM_POWER_OFF,
+ },
};
static struct idle_statedata dra7_idle_data[] = {
@@ -296,6 +301,15 @@ static struct cpuidle_driver omap5_idle_driver = {
.name = "C2",
.desc = "CPUx CSWR, MPUSS CSWR",
},
+ {
+ /* C3 - CPU0 OFF + CPU1 OFF + MPU OSWR */
+ .exit_latency = 460 + 518,
+ .target_residency = 1100,
+ .flags = CPUIDLE_FLAG_TIMER_STOP | CPUIDLE_FLAG_COUPLED,
+ .enter = omap_enter_idle_coupled,
+ .name = "C3",
+ .desc = "CPUx OFF, MPUSS OSWR",
+ },
},
.state_count = ARRAY_SIZE(omap5_idle_data),
.safe_state_index = 0,
diff --git a/arch/arm/mach-omap2/pm44xx.c b/arch/arm/mach-omap2/pm44xx.c
--- a/arch/arm/mach-omap2/pm44xx.c
+++ b/arch/arm/mach-omap2/pm44xx.c
@@ -225,7 +225,7 @@ int __init omap4_pm_init_early(void)
if (cpu_is_omap446x())
pm44xx_errata |= PM_OMAP4_ROM_SMP_BOOT_ERRATUM_GICD;
- if (soc_is_omap54xx() || soc_is_dra7xx())
+ if (soc_is_dra7xx())
pm44xx_errata |= PM_OMAP4_CPU_OSWR_DISABLE;
return 0;
diff --git a/arch/arm/mach-omap2/powerdomains54xx_data.c b/arch/arm/mach-omap2/powerdomains54xx_data.c
--- a/arch/arm/mach-omap2/powerdomains54xx_data.c
+++ b/arch/arm/mach-omap2/powerdomains54xx_data.c
@@ -107,8 +107,8 @@ static struct powerdomain cpu0_54xx_pwrdm = {
.voltdm = { .name = "mpu" },
.prcm_offs = OMAP54XX_PRCM_MPU_PRM_C0_INST,
.prcm_partition = OMAP54XX_PRCM_MPU_PARTITION,
- .pwrsts = PWRSTS_RET_ON,
- .pwrsts_logic_ret = PWRSTS_RET,
+ .pwrsts = PWRSTS_OFF_RET_ON,
+ .pwrsts_logic_ret = PWRSTS_OFF_RET,
.banks = 1,
.pwrsts_mem_ret = {
[0] = PWRSTS_OFF_RET, /* cpu0_l1 */
@@ -124,8 +124,8 @@ static struct powerdomain cpu1_54xx_pwrdm = {
.voltdm = { .name = "mpu" },
.prcm_offs = OMAP54XX_PRCM_MPU_PRM_C1_INST,
.prcm_partition = OMAP54XX_PRCM_MPU_PARTITION,
- .pwrsts = PWRSTS_RET_ON,
- .pwrsts_logic_ret = PWRSTS_RET,
+ .pwrsts = PWRSTS_OFF_RET_ON,
+ .pwrsts_logic_ret = PWRSTS_OFF_RET,
.banks = 1,
.pwrsts_mem_ret = {
[0] = PWRSTS_OFF_RET, /* cpu1_l1 */
@@ -158,7 +158,7 @@ static struct powerdomain mpu_54xx_pwrdm = {
.prcm_offs = OMAP54XX_PRM_MPU_INST,
.prcm_partition = OMAP54XX_PRM_PARTITION,
.pwrsts = PWRSTS_RET_ON,
- .pwrsts_logic_ret = PWRSTS_RET,
+ .pwrsts_logic_ret = PWRSTS_OFF_RET,
.banks = 2,
.pwrsts_mem_ret = {
[0] = PWRSTS_OFF_RET, /* mpu_l2 */
--
2.14.1
More information about the linux-arm-kernel
mailing list