[GIT PULL 2/6] Broadcom devicetree changes for 4.14
Florian Fainelli
f.fainelli at gmail.com
Thu Aug 17 11:37:44 PDT 2017
The following changes since commit 5771a8c08880cdca3bfb4a3fc6d309d6bba20877:
Linux v4.13-rc1 (2017-07-15 15:22:10 -0700)
are available in the git repository at:
http://github.com/Broadcom/stblinux.git tags/arm-soc/for-4.14/devicetree
for you to fetch changes up to 0173b2cd6948b5b96ac4e8dbc3bcb4dd0b45c296:
ARM: BCM53573: Specify ports for USB LED for Tenda AC9 (2017-08-17 10:18:07 -0700)
----------------------------------------------------------------
This pull request contains Broadcom ARM-based SoCs Device Tree changes for
4.14, please pull the following:
- Eric moves the bcm2837 DT file from arm64 to arm because it created a maintenance
problem and would have required either duplication or cross merges
- Stefan changes how the pinmuxing is defined and pushes it at the board level
to support Raspberry Pi Zero Wireless. He then adds supports for the actual
Raspberry Pi Zero Wireless board along with binding documentation. Stefan
also defines a proper SMP enable-method property and binding for BCM2836
(Raspbery Pi 2)
- Rafal describes the BCM5301X USB ports correctly in Device Tree such that
it becomes possible to assign them to specific LED triggers (e.g: USB activity).
He does the same thing for BCM53573 and defines default LED triggers for USB.
- Jon provides a fix for Northstar Plus which consists in correctly defining
the "dma-coherent" property for peripherals which are DMA coherent. He also
does a bit of re-arrangement of the USB DT nodes and finally adds USB 3 PHY
and host controller support for NorthStar Plus
- Florian adds support for Broadcom's BCM947189ACDBMR reference board which is
based on BCM47182/53573 and which supports external MoCA (BCM6802)
- Ray fixes the wrong UART2 base address for Cygnus
- Scott moves the v3d node in the proper unit address order and defines the correct
UART alias for the BCM91130_entphn reference board to be UART3
- Jason adds the DT node for the Cygnus Cortex-A9 Performance Monitoring Unit
- Jonathan adds a bunch of additional peripherals to the Cygnus DTS include file:
SDHCI, Keypad, SPI, DMA and pinmux configurations
- Raveendra adds the Cygnus OHCI and EHCI Device Tree nodes
----------------------------------------------------------------
Eric Anholt (1):
ARM: dts: bcm283x: Move the BCM2837 DT contents from arm64 to arm.
Florian Fainelli (3):
ARM: dts: BCM53573: Add Broadcom BCM947189ACDBMR board support
Merge tag 'bcm2835-dt-next-2017-08-07' into devicetree/next
Merge tag 'bcm2835-dt-next-2017-08-15' into devicetree/next
Jason Uy (1):
ARM: dts: cygnus: Enable Performance Monitoring Unit
Jon Mason (3):
ARM: dts: NSP: Add dma-coherent to relevant DT entries
ARM: dts: NSP: Rearrage USB entries
ARM: dts: NSP: Add USB3 and USB3 PHY to NSP
Jonathan Richardson (1):
ARM: dts: cygnus: Add additional peripherals to dtsi
Rafał Miłecki (3):
ARM: dts: BCM5301X: Specify USB ports for each controller
ARM: dts: BCM5301X: Specify USB ports for USB LEDs of few devices
ARM: BCM53573: Specify ports for USB LED for Tenda AC9
Raveendra Padasalagi (1):
ARM: dts: cygnus: Add generic-ehci/ohci nodes
Ray Jui (1):
ARM: dts: cygnus: Fix incorrect UART2 register base
Scott Branden (2):
ARM: dts: cygnus: place v3d in proper address ordered location
ARM: dts: cygnus: add serial0 alias for uart3 on bcm91130_entphn
Stefan Wahren (5):
ARM: bcm283x: Define UART pinmuxing on board level
dt-bindings: bcm: Add Raspberry Pi Zero W
ARM: dts: bcm2835: Add Raspberry Pi Zero W
dt-bindings: arm: add SMP enable-method for BCM2836
ARM: dts: bcm283x: Add 32-bit enable method for SMP
.../devicetree/bindings/arm/bcm/brcm,bcm2835.txt | 4 +
Documentation/devicetree/bindings/arm/cpus.txt | 1 +
arch/arm/boot/dts/Makefile | 6 +-
arch/arm/boot/dts/bcm-cygnus.dtsi | 149 +++++++++++++++++++--
arch/arm/boot/dts/bcm-nsp.dtsi | 59 ++++++--
arch/arm/boot/dts/bcm2835-rpi-a-plus.dts | 6 +
arch/arm/boot/dts/bcm2835-rpi-a.dts | 6 +
arch/arm/boot/dts/bcm2835-rpi-b-plus.dts | 6 +
arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts | 6 +
arch/arm/boot/dts/bcm2835-rpi-b.dts | 6 +
arch/arm/boot/dts/bcm2835-rpi-zero-w.dts | 139 +++++++++++++++++++
arch/arm/boot/dts/bcm2835-rpi-zero.dts | 6 +
arch/arm/boot/dts/bcm2835-rpi.dtsi | 2 +-
arch/arm/boot/dts/bcm2836-rpi-2-b.dts | 6 +
arch/arm/boot/dts/bcm2836.dtsi | 1 +
arch/arm/boot/dts/bcm2837-rpi-3-b.dts | 52 ++++++-
.../dts/broadcom => arm/boot/dts}/bcm2837.dtsi | 1 +
arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts | 4 +
arch/arm/boot/dts/bcm4708-netgear-r6250.dts | 3 +
arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts | 6 +
arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts | 4 +
arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts | 5 +
arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts | 3 +
arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts | 3 +
arch/arm/boot/dts/bcm47189-tenda-ac9.dts | 2 +
arch/arm/boot/dts/bcm5301x.dtsi | 34 +++++
arch/arm/boot/dts/bcm53573.dtsi | 4 +
arch/arm/boot/dts/bcm911360_entphn.dts | 7 +-
arch/arm/boot/dts/bcm947189acdbmr.dts | 97 ++++++++++++++
arch/arm/boot/dts/bcm958522er.dts | 8 ++
arch/arm/boot/dts/bcm958525er.dts | 8 ++
arch/arm/boot/dts/bcm958525xmc.dts | 8 ++
arch/arm/boot/dts/bcm958622hr.dts | 8 ++
arch/arm/boot/dts/bcm958623hr.dts | 8 ++
arch/arm/boot/dts/bcm958625hr.dts | 8 ++
arch/arm/boot/dts/bcm958625k.dts | 8 ++
arch/arm64/boot/dts/broadcom/bcm2835-rpi.dtsi | 1 -
arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts | 42 +-----
.../boot/dts/broadcom/bcm283x-rpi-smsc9514.dtsi | 1 -
.../boot/dts/broadcom/bcm283x-rpi-usb-host.dtsi | 1 -
arch/arm64/boot/dts/broadcom/bcm283x.dtsi | 1 -
41 files changed, 651 insertions(+), 79 deletions(-)
create mode 100644 arch/arm/boot/dts/bcm2835-rpi-zero-w.dts
rename arch/{arm64/boot/dts/broadcom => arm/boot/dts}/bcm2837.dtsi (96%)
create mode 100644 arch/arm/boot/dts/bcm947189acdbmr.dts
delete mode 120000 arch/arm64/boot/dts/broadcom/bcm2835-rpi.dtsi
delete mode 120000 arch/arm64/boot/dts/broadcom/bcm283x-rpi-smsc9514.dtsi
delete mode 120000 arch/arm64/boot/dts/broadcom/bcm283x-rpi-usb-host.dtsi
delete mode 120000 arch/arm64/boot/dts/broadcom/bcm283x.dtsi
More information about the linux-arm-kernel
mailing list