[GIT PULL 1/6] Broadcom soc changes for 4.14

[Florian Fainelli]

The following changes since commit 5771a8c08880cdca3bfb4a3fc6d309d6bba20877:

  Linux v4.13-rc1 (2017-07-15 15:22:10 -0700)

are available in the git repository at:

  http://github.com/Broadcom/stblinux.git tags/arm-soc/for-4.14/soc

for you to fetch changes up to e831871597aaa1f650b83f96b61858907c203b76:

  Merge tag 'bcm2835-soc-next-2017-08-15' into soc/next (2017-08-16 18:14:49 -0700)

----------------------------------------------------------------
This pull request contains Broadcom ARM-based SoC/Kconfig changes for 4.14,
please pull the following:

- Stefan moves the BCM2836 SMP bring-up code from the irqchip driver down to
  where it belongs under arch/arm/mach-bcm/. This requires us to merge parts
  of the devicetree/next branch because we depend on Eric's change that relocates
  the bcm2836/37 Device Tree files as well as the "enable-method" being correctly
  set in the Device Tree source files.

- Danilo removes the fixed clocks introduced earlier when we did not have a
  CPRMAN clock provider and in the process removes the init_machine callback
  since we no longer need it.

- Phil provides a fix for the SMP bring-up code to have a "sev" (and corresponding
  barrier) instruction in order to wake-up secondary cores. Future Rasperry Pi
  firmware(s) will depend on this.

----------------------------------------------------------------
Danilo Krummrich (1):
      clk: bcm2835: remove remains from stub clk driver

Eric Anholt (2):
      ARM: dts: bcm283x: Move the BCM2837 DT contents from arm64 to arm.
      Merge tag 'bcm2835-dt-next-2017-08-15' into HEAD

Florian Fainelli (3):
      ARM: dts: BCM53573: Add Broadcom BCM947189ACDBMR board support
      Merge tag 'bcm2835-dt-next-2017-08-07' into devicetree/next
      Merge tag 'bcm2835-soc-next-2017-08-15' into soc/next

Jon Mason (3):
      ARM: dts: NSP: Add dma-coherent to relevant DT entries
      ARM: dts: NSP: Rearrage USB entries
      ARM: dts: NSP: Add USB3 and USB3 PHY to NSP

Phil Elwell (1):
      ARM: bcm2836: Send event when onlining other cores

Rafał Miłecki (2):
      ARM: dts: BCM5301X: Specify USB ports for each controller
      ARM: dts: BCM5301X: Specify USB ports for USB LEDs of few devices

Stefan Wahren (6):
      ARM: bcm283x: Define UART pinmuxing on board level
      dt-bindings: bcm: Add Raspberry Pi Zero W
      ARM: dts: bcm2835: Add Raspberry Pi Zero W
      dt-bindings: arm: add SMP enable-method for BCM2836
      ARM: dts: bcm283x: Add 32-bit enable method for SMP
      irqchip: bcm2836: Move SMP startup code to arch/arm

 .../devicetree/bindings/arm/bcm/brcm,bcm2835.txt   |   4 +
 Documentation/devicetree/bindings/arm/cpus.txt     |   1 +
 arch/arm/boot/dts/Makefile                         |   6 +-
 arch/arm/boot/dts/bcm-nsp.dtsi                     |  59 ++++++---
 arch/arm/boot/dts/bcm2835-rpi-a-plus.dts           |   6 +
 arch/arm/boot/dts/bcm2835-rpi-a.dts                |   6 +
 arch/arm/boot/dts/bcm2835-rpi-b-plus.dts           |   6 +
 arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts           |   6 +
 arch/arm/boot/dts/bcm2835-rpi-b.dts                |   6 +
 arch/arm/boot/dts/bcm2835-rpi-zero-w.dts           | 139 +++++++++++++++++++++
 arch/arm/boot/dts/bcm2835-rpi-zero.dts             |   6 +
 arch/arm/boot/dts/bcm2835-rpi.dtsi                 |   2 +-
 arch/arm/boot/dts/bcm2836-rpi-2-b.dts              |   6 +
 arch/arm/boot/dts/bcm2836.dtsi                     |   1 +
 arch/arm/boot/dts/bcm2837-rpi-3-b.dts              |  52 +++++++-
 .../dts/broadcom => arm/boot/dts}/bcm2837.dtsi     |   1 +
 arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts  |   4 +
 arch/arm/boot/dts/bcm4708-netgear-r6250.dts        |   3 +
 arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts      |   6 +
 arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts |   4 +
 arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts  |   5 +
 arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts      |   3 +
 arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts      |   3 +
 arch/arm/boot/dts/bcm5301x.dtsi                    |  34 +++++
 arch/arm/boot/dts/bcm947189acdbmr.dts              |  97 ++++++++++++++
 arch/arm/boot/dts/bcm958522er.dts                  |   8 ++
 arch/arm/boot/dts/bcm958525er.dts                  |   8 ++
 arch/arm/boot/dts/bcm958525xmc.dts                 |   8 ++
 arch/arm/boot/dts/bcm958622hr.dts                  |   8 ++
 arch/arm/boot/dts/bcm958623hr.dts                  |   8 ++
 arch/arm/boot/dts/bcm958625hr.dts                  |   8 ++
 arch/arm/boot/dts/bcm958625k.dts                   |   8 ++
 arch/arm/mach-bcm/Makefile                         |   5 +
 arch/arm/mach-bcm/board_bcm2835.c                  |   7 --
 arch/arm/mach-bcm/platsmp.c                        |  38 ++++++
 arch/arm64/boot/dts/broadcom/bcm2835-rpi.dtsi      |   1 -
 arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts   |  42 +------
 .../boot/dts/broadcom/bcm283x-rpi-smsc9514.dtsi    |   1 -
 .../boot/dts/broadcom/bcm283x-rpi-usb-host.dtsi    |   1 -
 arch/arm64/boot/dts/broadcom/bcm283x.dtsi          |   1 -
 drivers/clk/bcm/clk-bcm2835-aux.c                  |   1 -
 drivers/clk/bcm/clk-bcm2835.c                      |  30 -----
 drivers/irqchip/irq-bcm2836.c                      |  79 +-----------
 include/linux/clk/bcm2835.h                        |  24 ----
 include/linux/irqchip/irq-bcm2836.h                |  70 +++++++++++
 45 files changed, 620 insertions(+), 202 deletions(-)
 create mode 100644 arch/arm/boot/dts/bcm2835-rpi-zero-w.dts
 rename arch/{arm64/boot/dts/broadcom => arm/boot/dts}/bcm2837.dtsi (96%)
 create mode 100644 arch/arm/boot/dts/bcm947189acdbmr.dts
 delete mode 120000 arch/arm64/boot/dts/broadcom/bcm2835-rpi.dtsi
 delete mode 120000 arch/arm64/boot/dts/broadcom/bcm283x-rpi-smsc9514.dtsi
 delete mode 120000 arch/arm64/boot/dts/broadcom/bcm283x-rpi-usb-host.dtsi
 delete mode 120000 arch/arm64/boot/dts/broadcom/bcm283x.dtsi
 delete mode 100644 include/linux/clk/bcm2835.h
 create mode 100644 include/linux/irqchip/irq-bcm2836.h