[RFC 0/3] arm64: Realtek RTD1295 IRQ mux
afaerber at suse.de
Thu Aug 17 03:11:37 PDT 2017
This series adds two IRQ muxes for the Realtek RTD1295 SoC.
Based on the reset controller series.
There being no public source code for RTD1295, the implementation is based on
register offsets seen in the DT, split up into two separate nodes.
A workaround for hanging timer initialization was taken from QNAP's rtk119x
GPL code dump and is not yet fully understood; that code also contains a quirk
for i2c3 in the iso mux that is not yet verified to be needed on RTD1295,
for lack of i2c driver, assuming a linear intr_status/intr_en mapping for now.
My convention here is to use a compatible string for the model that I've
tested (RTD1295) but a file name of rtd119x to indicate its RTD1195 heritage.
More experimental patches at:
Have a lot of fun!
Cc: Thomas Gleixner <tglx at linutronix.de>
Cc: Jason Cooper <jason at lakedaemon.net>
Cc: Marc Zyngier <marc.zyngier at arm.com>
Cc: Roc He <hepeng at zidoo.tv>
Cc: 蒋丽琴 <jiang.liqin at geniatech.com>
Cc: devicetree at vger.kernel.org
Andreas Färber (3):
dt-bindings: interrupt-controller: Add Realtek RTD1295
arm64: dts: realtek: Add irq mux to RTD1295
irqchip: Add Realtek RTD1295 mux driver
.../interrupt-controller/realtek,rtd119x-mux.txt | 28 +++
arch/arm64/boot/dts/realtek/rtd1295.dtsi | 22 +++
drivers/irqchip/Makefile | 1 +
drivers/irqchip/irq-rtd119x-mux.c | 201 +++++++++++++++++++++
4 files changed, 252 insertions(+)
create mode 100644 Documentation/devicetree/bindings/interrupt-controller/realtek,rtd119x-mux.txt
create mode 100644 drivers/irqchip/irq-rtd119x-mux.c
More information about the linux-arm-kernel