[PATCH] ARM: dts: qcom-apq8064: Fix dsi and hdmi phy cells

[Andy Gross]

This patch adds the necessary #phy-cells property to the DSI and HDMI
phys.

Signed-off-by: Andy Gross <andy.gross at linaro.org>
---
 arch/arm/boot/dts/qcom-apq8064.dtsi | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
index f3db185..d08f3db 100644
--- a/arch/arm/boot/dts/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
@@ -906,11 +906,11 @@
 				usb_hs1_phy: phy {
 					compatible = "qcom,usb-hs-phy-apq8064",
 						     "qcom,usb-hs-phy";
-					#phy-cells = <0>;
 					clocks = <&sleep_clk>, <&cxo_board>;
 					clock-names = "sleep", "ref";
 					resets = <&usb1 0>;
 					reset-names = "por";
+					#phy-cells = <0>;
 				};
 			};
 		};
@@ -1263,6 +1263,7 @@
 		dsi0_phy: dsi-phy at 4700200 {
 			compatible = "qcom,dsi-phy-28nm-8960";
 			#clock-cells = <1>;
+			#phy-cells = <0>;
 
 			reg = <0x04700200 0x100>,
 				<0x04700300 0x200>,
@@ -1417,6 +1418,7 @@
 
 			clocks = <&mmcc HDMI_S_AHB_CLK>;
 			clock-names = "slave_iface_clk";
+			#phy-cells = <0>;
 		};
 
 		mdp: mdp at 5100000 {
-- 
2.7.4