[PATCH] ARM: dts: am57xx-beagle-x15: Add support for rev C

[Robert Nelson]

Latest update to the BeagleBoard-X15 platform (revision C). This board contains
a silicon update (Rev 2.0), which includes a fix for the 2nd ethernet phy when
running at 1000 Mbps speeds.

This board can be indentified by the [C.00] after [BBRDX15_] in the at24 eeprom:
[BBRDX15_C.001731PX150249]

Rev C is now in full production and boards are available for end users.

https://beagleboard.org/x15
https://github.com/beagleboard/beagleboard-x15/

Signed-off-by: Robert Nelson <robertcnelson at gmail.com>
CC: Tony Lindgren <tony at atomide.com>
CC: Nishanth Menon <nm at ti.com>
CC: Jason Kridner <jkridner at beagleboard.org>
CC: Drew Fustini <drew at beagleboard.org>
---
 arch/arm/boot/dts/Makefile                   |  1 +
 arch/arm/boot/dts/am57xx-beagle-x15-revc.dts | 24 ++++++++++++++++++++++++
 2 files changed, 25 insertions(+)
 create mode 100644 arch/arm/boot/dts/am57xx-beagle-x15-revc.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index c293e841eea3..d3a4fe7eb6f7 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -651,6 +651,7 @@ dtb-$(CONFIG_SOC_OMAP5) += \
 dtb-$(CONFIG_SOC_DRA7XX) += \
 	am57xx-beagle-x15.dtb \
 	am57xx-beagle-x15-revb1.dtb \
+	am57xx-beagle-x15-revc.dtb \
 	am57xx-cl-som-am57x.dtb \
 	am57xx-sbc-am57x.dtb \
 	am572x-idk.dtb \
diff --git a/arch/arm/boot/dts/am57xx-beagle-x15-revc.dts b/arch/arm/boot/dts/am57xx-beagle-x15-revc.dts
new file mode 100644
index 000000000000..742eeb96b8aa
--- /dev/null
+++ b/arch/arm/boot/dts/am57xx-beagle-x15-revc.dts
@@ -0,0 +1,24 @@
+/*
+ * Copyright (C) 2014-2016 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "am57xx-beagle-x15-common.dtsi"
+
+/ {
+	model = "TI AM5728 BeagleBoard-X15 rev C";
+};
+
+&tpd12s015 {
+	gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>,	/* gpio7_10, CT CP HPD */
+		<&gpio2 30 GPIO_ACTIVE_HIGH>,	/* gpio2_30, LS OE */
+		<&gpio7 12 GPIO_ACTIVE_HIGH>;	/* gpio7_12/sp1_cs2, HPD */
+};
+
+&mmc1 {
+	vmmc-supply = <&vdd_3v3>;
+	vqmmc-supply = <&ldo1_reg>;
+};
-- 
2.14.1