[PATCH v5 02/19] crypto: ccp: use -EAGAIN for transient busy indication

[Gary R Hook]

On 08/14/2017 10:21 AM, Gilad Ben-Yossef wrote:
> Replace -EBUSY with -EAGAIN when reporting transient busy
> indication in the absence of backlog.
>
> Signed-off-by: Gilad Ben-Yossef <gilad at benyossef.com>

Reviewed-by: Gary R Hook <gary.hook at amd.com>

> ---
>  drivers/crypto/ccp/ccp-crypto-main.c | 8 +++-----
>  drivers/crypto/ccp/ccp-dev.c         | 7 +++++--
>  2 files changed, 8 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/crypto/ccp/ccp-crypto-main.c b/drivers/crypto/ccp/ccp-crypto-main.c
> index 35a9de7..403ff0a 100644
> --- a/drivers/crypto/ccp/ccp-crypto-main.c
> +++ b/drivers/crypto/ccp/ccp-crypto-main.c
> @@ -222,9 +222,10 @@ static int ccp_crypto_enqueue_cmd(struct ccp_crypto_cmd *crypto_cmd)
>
>  	/* Check if the cmd can/should be queued */
>  	if (req_queue.cmd_count >= CCP_CRYPTO_MAX_QLEN) {
> -		ret = -EBUSY;
> -		if (!(crypto_cmd->cmd->flags & CCP_CMD_MAY_BACKLOG))
> +		if (!(crypto_cmd->cmd->flags & CCP_CMD_MAY_BACKLOG)) {
> +			ret = -EAGAIN;
>  			goto e_lock;
> +		}
>  	}
>
>  	/* Look for an entry with the same tfm.  If there is a cmd
> @@ -243,9 +244,6 @@ static int ccp_crypto_enqueue_cmd(struct ccp_crypto_cmd *crypto_cmd)
>  		ret = ccp_enqueue_cmd(crypto_cmd->cmd);
>  		if (!ccp_crypto_success(ret))
>  			goto e_lock;	/* Error, don't queue it */
> -		if ((ret == -EBUSY) &&
> -		    !(crypto_cmd->cmd->flags & CCP_CMD_MAY_BACKLOG))
> -			goto e_lock;	/* Not backlogging, don't queue it */
>  	}
>
>  	if (req_queue.cmd_count >= CCP_CRYPTO_MAX_QLEN) {
> diff --git a/drivers/crypto/ccp/ccp-dev.c b/drivers/crypto/ccp/ccp-dev.c
> index 4e029b1..3d637e3 100644
> --- a/drivers/crypto/ccp/ccp-dev.c
> +++ b/drivers/crypto/ccp/ccp-dev.c
> @@ -292,9 +292,12 @@ int ccp_enqueue_cmd(struct ccp_cmd *cmd)
>  	i = ccp->cmd_q_count;
>
>  	if (ccp->cmd_count >= MAX_CMD_QLEN) {
> -		ret = -EBUSY;
> -		if (cmd->flags & CCP_CMD_MAY_BACKLOG)
> +		if (cmd->flags & CCP_CMD_MAY_BACKLOG) {
> +			ret = -EBUSY;
>  			list_add_tail(&cmd->entry, &ccp->backlog);
> +		} else {
> +			ret = -EAGAIN;
> +		}
>  	} else {
>  		ret = -EINPROGRESS;
>  		ccp->cmd_count++;
>