[PATCH 20/30] ARM: kernel: use PC relative symbol references in suspend/resume code

[Nicolas Pitre]

On Mon, 14 Aug 2017, Ard Biesheuvel wrote:

> Replace some unnecessary absolute references with relative ones. Also,
> to prepare for runtime relocation, which occurs with the caches on,
> defer taking the absolute address of cpu_resume_after_mmu() until after
> the MMU is enabled.
> 
> Cc: Russell King <linux at armlinux.org.uk>
> Signed-off-by: Ard Biesheuvel <ard.biesheuvel at linaro.org>
> ---
>  arch/arm/kernel/sleep.S | 11 +++++------
>  1 file changed, 5 insertions(+), 6 deletions(-)
> 
> diff --git a/arch/arm/kernel/sleep.S b/arch/arm/kernel/sleep.S
> index 3026b119d3ff..9efd1c7d3552 100644
> --- a/arch/arm/kernel/sleep.S
> +++ b/arch/arm/kernel/sleep.S
> @@ -60,18 +60,17 @@
>  ENTRY(__cpu_suspend)
>  	stmfd	sp!, {r4 - r11, lr}
>  #ifdef MULTI_CPU
> -	ldr	r10, =processor
> -	ldr	r4, [r10, #CPU_SLEEP_SIZE] @ size of CPU sleep state
> +	ldr_l	r4, processor + CPU_SLEEP_SIZE	@ size of CPU sleep state
>  #else
> -	ldr	r4, =cpu_suspend_size
> +	adr_l	r4, cpu_suspend_size
>  #endif
>  	mov	r5, sp			@ current virtual SP
>  	add	r4, r4, #12		@ Space for pgd, virt sp, phys resume fn
>  	sub	sp, sp, r4		@ allocate CPU state on stack
> -	ldr	r3, =sleep_save_sp
> +	adr_l	r3, sleep_save_sp
>  	stmfd	sp!, {r0, r1}		@ save suspend func arg and pointer
>  	ldr	r3, [r3, #SLEEP_SAVE_SP_VIRT]
> -	ALT_SMP(ldr r0, =mpidr_hash)
> +	ALT_SMP(adr_l r0, mpidr_hash)
>  	ALT_UP_B(1f)

The above is dangerous. adr_l expands to more than one instruction which 
is not what ALT_SMP() was designed for. Here it might happen to work 
anyway because it is combined with ALT_UP_B() but with ALT_UP() it 
wouldn't. This is a mistake waiting to happen.


>  	/* This ldmia relies on the memory layout of the mpidr_hash struct */
>  	ldmia	r0, {r1, r6-r8}	@ r1 = mpidr mask (r6,r7,r8) = l[0,1,2] shifts
> @@ -100,13 +99,13 @@ ENDPROC(cpu_suspend_abort)
>  	.align	5
>  	.pushsection	.idmap.text,"ax"
>  ENTRY(cpu_resume_mmu)
> -	ldr	r3, =cpu_resume_after_mmu
>  	instr_sync
>  	mcr	p15, 0, r0, c1, c0, 0	@ turn on MMU, I-cache, etc
>  	mrc	p15, 0, r0, c0, c0, 0	@ read id reg
>  	instr_sync
>  	mov	r0, r0
>  	mov	r0, r0
> +	ldr	r3, =cpu_resume_after_mmu
>  	ret	r3			@ jump to virtual address
>  ENDPROC(cpu_resume_mmu)
>  	.popsection
> -- 
> 2.11.0
> 
>