[PATCH 1/4] drm/tve200: Add DT bindings

[Linus Walleij]

This adds device tree bindings for the Faraday TVE200 IP block.
This IP block is present in the Gemini ARM SoC and also in some
Grain Media GMxxxx SoCs.

Cc: devicetree at vger.kernel.org
Signed-off-by: Linus Walleij <linus.walleij at linaro.org>
---
 .../devicetree/bindings/display/faraday,tve200.txt | 41 ++++++++++++++++++++++
 1 file changed, 41 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/faraday,tve200.txt

diff --git a/Documentation/devicetree/bindings/display/faraday,tve200.txt b/Documentation/devicetree/bindings/display/faraday,tve200.txt
new file mode 100644
index 000000000000..95d588fbb2f2
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/faraday,tve200.txt
@@ -0,0 +1,41 @@
+* Faraday TV Encoder TVE200
+
+Required properties:
+
+- compatible: must be one of:
+	"faraday,tve200"
+	"cortina,gemini-tvc", "faraday,tve200"
+
+- reg: base address and size of the control registers block
+
+- interrupts: contains an interrupt specifier for the interrupt
+	line from the TVE200
+
+- clock-names: should contain "PCLK" for the clock line clocking the
+	silicon and "TVE" for the 27MHz clock to the video driver
+
+- clocks: contains phandle and clock specifier pairs for the entries
+	in the clock-names property. See
+	Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Optional properties:
+
+- resets: contains the reset line phandle for the block
+
+Required sub-nodes:
+
+- port: describes LCD panel signals, following the common binding
+	for video transmitter interfaces; see
+	Documentation/devicetree/bindings/media/video-interfaces.txt
+
+Example:
+
+tvc at 6a000000 {
+	compatible = "faraday,tve200";
+	reg = <0x6a000000 0x1000>;
+	interrupts = <13 IRQ_TYPE_EDGE_RISING>;
+	resets = <&syscon GEMINI_RESET_TVC>;
+	clocks = <&syscon GEMINI_CLK_GATE_TVC>,
+		 <&syscon GEMINI_CLK_TVC>;
+	clock-names = "PCLK", "TVE";
+};
-- 
2.13.4