[PATCH v4 1/3] clk: sunxi-ng: div: Add support for fixed post-divider

icenowy at aosc.io icenowy at aosc.io
Sat Aug 12 05:49:31 PDT 2017


在 2017-08-12 20:43,Icenowy Zheng 写道:
> From: Priit Laes <plaes at plaes.org>
> 
> SATA clock on sun4i/sun7i is of type (parent) / M / 6 where
> 6 is fixed post-divider.
> 
> Signed-off-by: Priit Laes <plaes at plaes.org>

Oh sorry, it misses my SoB.

> ---
> It's based on the patch in v6 of the A10/A20 CCU patchset, but with
> ccu_div_round_rate fixed.
> 
>  drivers/clk/sunxi-ng/ccu_div.c | 22 +++++++++++++++++++---
>  drivers/clk/sunxi-ng/ccu_div.h |  3 ++-
>  2 files changed, 21 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/clk/sunxi-ng/ccu_div.c 
> b/drivers/clk/sunxi-ng/ccu_div.c
> index c0e5c10d0091..baa3cf96507b 100644
> --- a/drivers/clk/sunxi-ng/ccu_div.c
> +++ b/drivers/clk/sunxi-ng/ccu_div.c
> @@ -21,10 +21,18 @@ static unsigned long ccu_div_round_rate(struct
> ccu_mux_internal *mux,
>  {
>  	struct ccu_div *cd = data;
> 
> -	return divider_round_rate_parent(&cd->common.hw, parent,
> +	if (cd->common.features & CCU_FEATURE_FIXED_POSTDIV)
> +		rate *= cd->fixed_post_div;
> +
> +	rate = divider_round_rate_parent(&cd->common.hw, parent,
>  					 rate, parent_rate,
>  					 cd->div.table, cd->div.width,
>  					 cd->div.flags);
> +
> +	if (cd->common.features & CCU_FEATURE_FIXED_POSTDIV)
> +		rate /= cd->fixed_post_div;
> +
> +	return rate;
>  }
> 
>  static void ccu_div_disable(struct clk_hw *hw)
> @@ -62,8 +70,13 @@ static unsigned long ccu_div_recalc_rate(struct 
> clk_hw *hw,
>  	parent_rate = ccu_mux_helper_apply_prediv(&cd->common, &cd->mux, -1,
>  						  parent_rate);
> 
> -	return divider_recalc_rate(hw, parent_rate, val, cd->div.table,
> -				   cd->div.flags);
> +	val = divider_recalc_rate(hw, parent_rate, val, cd->div.table,
> +				  cd->div.flags);
> +
> +	if (cd->common.features & CCU_FEATURE_FIXED_POSTDIV)
> +		val /= cd->fixed_post_div;
> +
> +	return val;
>  }
> 
>  static int ccu_div_determine_rate(struct clk_hw *hw,
> @@ -86,6 +99,9 @@ static int ccu_div_set_rate(struct clk_hw *hw,
> unsigned long rate,
>  	parent_rate = ccu_mux_helper_apply_prediv(&cd->common, &cd->mux, -1,
>  						  parent_rate);
> 
> +	if (cd->common.features & CCU_FEATURE_FIXED_POSTDIV)
> +		rate *= cd->fixed_post_div;
> +
>  	val = divider_get_val(rate, parent_rate, cd->div.table, 
> cd->div.width,
>  			      cd->div.flags);
> 
> diff --git a/drivers/clk/sunxi-ng/ccu_div.h 
> b/drivers/clk/sunxi-ng/ccu_div.h
> index 08d074451204..f3a5028dcd14 100644
> --- a/drivers/clk/sunxi-ng/ccu_div.h
> +++ b/drivers/clk/sunxi-ng/ccu_div.h
> @@ -86,9 +86,10 @@ struct ccu_div_internal {
>  struct ccu_div {
>  	u32			enable;
> 
> -	struct ccu_div_internal		div;
> +	struct ccu_div_internal	div;
>  	struct ccu_mux_internal	mux;
>  	struct ccu_common	common;
> +	unsigned int		fixed_post_div;
>  };
> 
>  #define SUNXI_CCU_DIV_TABLE_WITH_GATE(_struct, _name, _parent, _reg,	\



More information about the linux-arm-kernel mailing list