[PATCH v2 2/4] phy: phy-mt65xx-usb3: add SATA PHY support
Chunfeng Yun
chunfeng.yun at mediatek.com
Tue Aug 8 22:29:47 PDT 2017
From: Ryder Lee <ryder.lee at mediatek.com>
This patch adds SATA setting part.
Signed-off-by: Ryder Lee <ryder.lee at mediatek.com>
Signed-off-by: Chunfeng Yun <chunfeng.yun at mediatek.com>
---
drivers/phy/phy-mt65xx-usb3.c | 133 ++++++++++++++++++++++++++++++++++++++++--
1 file changed, 129 insertions(+), 4 deletions(-)
diff --git a/drivers/phy/phy-mt65xx-usb3.c b/drivers/phy/phy-mt65xx-usb3.c
index a9a85fa..5e9a415 100644
--- a/drivers/phy/phy-mt65xx-usb3.c
+++ b/drivers/phy/phy-mt65xx-usb3.c
@@ -29,7 +29,7 @@
#define SSUSB_SIFSLV_V1_U2FREQ 0x100 /* shared by u2 phys */
/* u2 phy bank */
#define SSUSB_SIFSLV_V1_U2PHY_COM 0x000
-/* u3/pcie phy banks */
+/* u3/pcie/sata phy banks */
#define SSUSB_SIFSLV_V1_U3PHYD 0x000
#define SSUSB_SIFSLV_V1_U3PHYA 0x200
@@ -199,6 +199,65 @@
#define U3P_SR_COEF_DIVISOR 1000
#define U3P_FM_DET_CYCLE_CNT 1024
+/* SATA register setting */
+#define PHYD_CTRL_SIGNAL_MODE4 0x1c
+/* CDR Charge Pump P-path current adjustment */
+#define RG_CDR_BICLTD1_GEN1_MSK GENMASK(23, 20)
+#define RG_CDR_BICLTD1_GEN1_VAL(x) ((0xf & (x)) << 20)
+#define RG_CDR_BICLTD0_GEN1_MSK GENMASK(11, 8)
+#define RG_CDR_BICLTD0_GEN1_VAL(x) ((0xf & (x)) << 8)
+
+#define PHYD_DESIGN_OPTION2 0x24
+/* Symbol lock count selection */
+#define RG_LOCK_CNT_SEL_MSK GENMASK(5, 4)
+#define RG_LOCK_CNT_SEL_VAL(x) ((0x3 & (x)) << 4)
+
+#define PHYD_DESIGN_OPTION9 0x40
+/* COMWAK GAP width window */
+#define RG_TG_MAX_MSK GENMASK(20, 16)
+#define RG_TG_MAX_VAL(x) ((0x1f & (x)) << 16)
+/* COMINIT GAP width window */
+#define RG_T2_MAX_MSK GENMASK(13, 8)
+#define RG_T2_MAX_VAL(x) ((0x3f & (x)) << 8)
+/* COMWAK GAP width window */
+#define RG_TG_MIN_MSK GENMASK(7, 5)
+#define RG_TG_MIN_VAL(x) ((0x7 & (x)) << 5)
+/* COMINIT GAP width window */
+#define RG_T2_MIN_MSK GENMASK(4, 0)
+#define RG_T2_MIN_VAL(x) (0x1f & (x))
+
+#define ANA_RG_CTRL_SIGNAL1 0x4c
+/* TX driver tail current control for 0dB de-empahsis mdoe for Gen1 speed */
+#define RG_IDRV_0DB_GEN1_MSK GENMASK(13, 8)
+#define RG_IDRV_0DB_GEN1_VAL(x) ((0x3f & (x)) << 8)
+
+#define ANA_RG_CTRL_SIGNAL4 0x58
+#define RG_CDR_BICLTR_GEN1_MSK GENMASK(23, 20)
+#define RG_CDR_BICLTR_GEN1_VAL(x) ((0xf & (x)) << 20)
+/* Loop filter R1 resistance adjustment for Gen1 speed */
+#define RG_CDR_BR_GEN2_MSK GENMASK(10, 8)
+#define RG_CDR_BR_GEN2_VAL(x) ((0x7 & (x)) << 8)
+
+#define ANA_RG_CTRL_SIGNAL6 0x60
+/* I-path capacitance adjustment for Gen1 */
+#define RG_CDR_BC_GEN1_MSK GENMASK(28, 24)
+#define RG_CDR_BC_GEN1_VAL(x) ((0x1f & (x)) << 24)
+#define RG_CDR_BIRLTR_GEN1_MSK GENMASK(4, 0)
+#define RG_CDR_BIRLTR_GEN1_VAL(x) (0x1f & (x))
+
+#define ANA_EQ_EYE_CTRL_SIGNAL1 0x6c
+/* RX Gen1 LEQ tuning step */
+#define RG_EQ_DLEQ_LFI_GEN1_MSK GENMASK(11, 8)
+#define RG_EQ_DLEQ_LFI_GEN1_VAL(x) ((0xf & (x)) << 8)
+
+#define ANA_EQ_EYE_CTRL_SIGNAL4 0xd8
+#define RG_CDR_BIRLTD0_GEN1_MSK GENMASK(20, 16)
+#define RG_CDR_BIRLTD0_GEN1_VAL(x) ((0x1f & (x)) << 16)
+
+#define ANA_EQ_EYE_CTRL_SIGNAL5 0xdc
+#define RG_CDR_BIRLTD0_GEN3_MSK GENMASK(4, 0)
+#define RG_CDR_BIRLTD0_GEN3_VAL(x) (0x1f & (x))
+
enum mt_phy_version {
MT_PHY_V1 = 1,
MT_PHY_V2,
@@ -630,6 +689,64 @@ static void pcie_phy_instance_power_off(struct mt65xx_u3phy *u3phy,
writel(tmp, bank->chip + U3P_U3_CHIP_GPIO_CTLE);
}
+static void sata_phy_instance_init(struct mt65xx_u3phy *u3phy,
+ struct mt65xx_phy_instance *instance)
+{
+ struct u3phy_banks *u3_banks = &instance->u3_banks;
+ void __iomem *phyd = u3_banks->phyd;
+ u32 tmp;
+
+ /* charge current adjustment */
+ tmp = readl(phyd + ANA_RG_CTRL_SIGNAL6);
+ tmp &= ~(RG_CDR_BIRLTR_GEN1_MSK | RG_CDR_BC_GEN1_MSK);
+ tmp |= RG_CDR_BIRLTR_GEN1_VAL(0x6) | RG_CDR_BC_GEN1_VAL(0x1a);
+ writel(tmp, phyd + ANA_RG_CTRL_SIGNAL6);
+
+ tmp = readl(phyd + ANA_EQ_EYE_CTRL_SIGNAL4);
+ tmp &= ~RG_CDR_BIRLTD0_GEN1_MSK;
+ tmp |= RG_CDR_BIRLTD0_GEN1_VAL(0x18);
+ writel(tmp, phyd + ANA_EQ_EYE_CTRL_SIGNAL4);
+
+ tmp = readl(phyd + ANA_EQ_EYE_CTRL_SIGNAL5);
+ tmp &= ~RG_CDR_BIRLTD0_GEN3_MSK;
+ tmp |= RG_CDR_BIRLTD0_GEN3_VAL(0x06);
+ writel(tmp, phyd + ANA_EQ_EYE_CTRL_SIGNAL5);
+
+ tmp = readl(phyd + ANA_RG_CTRL_SIGNAL4);
+ tmp &= ~(RG_CDR_BICLTR_GEN1_MSK | RG_CDR_BR_GEN2_MSK);
+ tmp |= RG_CDR_BICLTR_GEN1_VAL(0x0c) | RG_CDR_BR_GEN2_VAL(0x07);
+ writel(tmp, phyd + ANA_RG_CTRL_SIGNAL4);
+
+ tmp = readl(phyd + PHYD_CTRL_SIGNAL_MODE4);
+ tmp &= ~(RG_CDR_BICLTD0_GEN1_MSK | RG_CDR_BICLTD1_GEN1_MSK);
+ tmp |= RG_CDR_BICLTD0_GEN1_VAL(0x08) | RG_CDR_BICLTD1_GEN1_VAL(0x02);
+ writel(tmp, phyd + PHYD_CTRL_SIGNAL_MODE4);
+
+ tmp = readl(phyd + PHYD_DESIGN_OPTION2);
+ tmp &= ~RG_LOCK_CNT_SEL_MSK;
+ tmp |= RG_LOCK_CNT_SEL_VAL(0x02);
+ writel(tmp, phyd + PHYD_DESIGN_OPTION2);
+
+ tmp = readl(phyd + PHYD_DESIGN_OPTION9);
+ tmp &= ~(RG_T2_MIN_MSK | RG_TG_MIN_MSK |
+ RG_T2_MAX_MSK | RG_TG_MAX_MSK);
+ tmp |= RG_T2_MIN_VAL(0x12) | RG_TG_MIN_VAL(0x04) |
+ RG_T2_MAX_VAL(0x31) | RG_TG_MAX_VAL(0x0e);
+ writel(tmp, phyd + PHYD_DESIGN_OPTION9);
+
+ tmp = readl(phyd + ANA_RG_CTRL_SIGNAL1);
+ tmp &= ~RG_IDRV_0DB_GEN1_MSK;
+ tmp |= RG_IDRV_0DB_GEN1_VAL(0x20);
+ writel(tmp, phyd + ANA_RG_CTRL_SIGNAL1);
+
+ tmp = readl(phyd + ANA_EQ_EYE_CTRL_SIGNAL1);
+ tmp &= ~RG_EQ_DLEQ_LFI_GEN1_MSK;
+ tmp |= RG_EQ_DLEQ_LFI_GEN1_VAL(0x03);
+ writel(tmp, phyd + ANA_EQ_EYE_CTRL_SIGNAL1);
+
+ dev_dbg(u3phy->dev, "%s(%d)\n", __func__, instance->index);
+}
+
static void phy_v1_banks_init(struct mt65xx_u3phy *u3phy,
struct mt65xx_phy_instance *instance)
{
@@ -649,6 +766,9 @@ static void phy_v1_banks_init(struct mt65xx_u3phy *u3phy,
u3_banks->phyd = instance->port_base + SSUSB_SIFSLV_V1_U3PHYD;
u3_banks->phya = instance->port_base + SSUSB_SIFSLV_V1_U3PHYA;
break;
+ case PHY_TYPE_SATA:
+ u3_banks->phyd = instance->port_base + SSUSB_SIFSLV_V1_U3PHYD;
+ break;
default:
dev_err(u3phy->dev, "incompatible PHY type\n");
return;
@@ -708,6 +828,9 @@ static int mt65xx_phy_init(struct phy *phy)
case PHY_TYPE_PCIE:
pcie_phy_instance_init(u3phy, instance);
break;
+ case PHY_TYPE_SATA:
+ sata_phy_instance_init(u3phy, instance);
+ break;
default:
dev_err(u3phy->dev, "incompatible PHY type\n");
return -EINVAL;
@@ -784,7 +907,8 @@ static struct phy *mt65xx_phy_xlate(struct device *dev,
instance->type = args->args[0];
if (!(instance->type == PHY_TYPE_USB2 ||
instance->type == PHY_TYPE_USB3 ||
- instance->type == PHY_TYPE_PCIE)) {
+ instance->type == PHY_TYPE_PCIE ||
+ instance->type == PHY_TYPE_SATA)) {
dev_err(dev, "unsupported device type: %d\n", instance->type);
return ERR_PTR(-EINVAL);
}
@@ -814,7 +938,7 @@ static struct phy *mt65xx_phy_xlate(struct device *dev,
.version = MT_PHY_V1,
};
-static const struct mt65xx_phy_pdata mt2712_pdata = {
+static const struct mt65xx_phy_pdata tphy_v2_pdata = {
.avoid_rx_sen_degradation = false,
.version = MT_PHY_V2,
};
@@ -826,9 +950,10 @@ static struct phy *mt65xx_phy_xlate(struct device *dev,
static const struct of_device_id mt65xx_u3phy_id_table[] = {
{ .compatible = "mediatek,mt2701-u3phy", .data = &tphy_v1_pdata },
- { .compatible = "mediatek,mt2712-u3phy", .data = &mt2712_pdata },
+ { .compatible = "mediatek,mt2712-u3phy", .data = &tphy_v2_pdata },
{ .compatible = "mediatek,mt8173-u3phy", .data = &mt8173_pdata },
{ .compatible = "mediatek,generic-tphy-v1", .data = &tphy_v1_pdata },
+ { .compatible = "mediatek,generic-tphy-v2", .data = &tphy_v2_pdata },
{ },
};
MODULE_DEVICE_TABLE(of, mt65xx_u3phy_id_table);
--
1.9.1
More information about the linux-arm-kernel
mailing list