[PATCH v2 10/18] firmware: arm_scmi: add support for polling based SCMI transfers

[Sudeep Holla]

It would be useful to have options to perform some SCMI transfers
atomically by polling for the completion flag instead of interrupt
driven. The SCMI specification has option to disable the interrupt and
poll for the completion flag in the shared memory.

This patch adds support for polling based SCMI transfers using that
option. This might be used for uninterrupted/atomic DVFS operations
from the scheduler context.

Cc: Arnd Bergmann <arnd at arndb.de>
Signed-off-by: Sudeep Holla <sudeep.holla at arm.com>
---
 drivers/firmware/arm_scmi/driver.c | 40 ++++++++++++++++++++++++++++++--------
 1 file changed, 32 insertions(+), 8 deletions(-)

diff --git a/drivers/firmware/arm_scmi/driver.c b/drivers/firmware/arm_scmi/driver.c
index 6f31761043e2..8257315cf3eb 100644
--- a/drivers/firmware/arm_scmi/driver.c
+++ b/drivers/firmware/arm_scmi/driver.c
@@ -26,6 +26,7 @@
  */
 
 #include <linux/bitmap.h>
+#include <linux/delay.h>
 #include <linux/export.h>
 #include <linux/io.h>
 #include <linux/kernel.h>
@@ -370,6 +371,19 @@ void scmi_one_xfer_put(const struct scmi_handle *handle, struct scmi_xfer *xfer)
 	up(&minfo->sem_xfer_count);
 }
 
+static bool
+scmi_xfer_poll_done(const struct scmi_info *info, struct scmi_xfer *xfer)
+{
+	struct scmi_shared_mem *mem = info->tx_payload;
+	u16 xfer_id = MSG_XTRACT_TOKEN(mem->msg_header);
+
+	if (xfer->hdr.seq != xfer_id)
+		return false;
+
+	return mem->channel_status & (SCMI_SHMEM_CHAN_STAT_CHANNEL_ERROR |
+		SCMI_SHMEM_CHAN_STAT_CHANNEL_FREE);
+}
+
 /**
  * scmi_do_xfer() - Do one transfer
  *
@@ -396,14 +410,24 @@ int scmi_do_xfer(const struct scmi_handle *handle, struct scmi_xfer *xfer)
 	/* mbox_send_message returns non-negative value on success, so reset */
 	ret = 0;
 
-	/* And we wait for the response. */
-	timeout = msecs_to_jiffies(info->desc->max_rx_timeout_ms);
-	if (!wait_for_completion_timeout(&xfer->done, timeout)) {
-		dev_err(dev, "mbox timed out in resp(caller: %pF)\n",
-			(void *)_RET_IP_);
-		ret = -ETIMEDOUT;
-	} else if (xfer->hdr.status) {
-		ret = scmi_to_linux_errno(xfer->hdr.status);
+	if (xfer->hdr.poll_completion) {
+		timeout = info->desc->max_rx_timeout_ms * 100;
+		while (!scmi_xfer_poll_done(info, xfer) && timeout--)
+			udelay(10);
+		if (timeout)
+			scmi_fetch_response(xfer, info->tx_payload);
+		else
+			ret = -ETIMEDOUT;
+	} else {
+		/* And we wait for the response. */
+		timeout = msecs_to_jiffies(info->desc->max_rx_timeout_ms);
+		if (!wait_for_completion_timeout(&xfer->done, timeout)) {
+			dev_err(dev, "mbox timed out in resp(caller: %pF)\n",
+				(void *)_RET_IP_);
+			ret = -ETIMEDOUT;
+		} else if (xfer->hdr.status) {
+			ret = scmi_to_linux_errno(xfer->hdr.status);
+		}
 	}
 	/*
 	 * NOTE: we might prefer not to need the mailbox ticker to manage the
-- 
2.7.4