[PATCH 3/5] edac: synopsys: Add ecc error injection support
Michal Simek
michal.simek at xilinx.com
Fri Aug 4 05:00:25 PDT 2017
From: Naga Sureshkumar Relli <naga.sureshkumar.relli at xilinx.com>
The ZynqMP DDRC controller has data poisoning support
to inject CE or UE errors. this patch adds this support
using sysfs attributes.
created the following sysfs entries to support this.
-> /sys/devices/system/edac/mc/mc0/inject_data_poison
-> /sys/devices/system/edac/mc/mc0/inject_data_error
Signed-off-by: Naga Sureshkumar Relli <nagasure at xilinx.com>
Signed-off-by: Michal Simek <michal.simek at xilinx.com>
---
drivers/edac/synopsys_edac.c | 291 ++++++++++++++++++++++++++++++++++++++++++-
1 file changed, 290 insertions(+), 1 deletion(-)
diff --git a/drivers/edac/synopsys_edac.c b/drivers/edac/synopsys_edac.c
index fdf1186151c1..546adc243bca 100644
--- a/drivers/edac/synopsys_edac.c
+++ b/drivers/edac/synopsys_edac.c
@@ -99,6 +99,7 @@
/* DDR ECC Quirks */
#define DDR_ECC_INTR_SUPPORT BIT(0)
+#define DDR_ECC_DATA_POISON_SUPPORT BIT(1)
/* ZynqMP Enhanced DDR memory controller registers that are relevant to ECC */
/* ECC Configuration Registers */
@@ -174,6 +175,11 @@
#define ECC_CEADDR1_BNKGRP_SHIFT 24
#define ECC_CEADDR1_BNKNR_SHIFT 16
+/* ECC Poison register shifts */
+#define ECC_POISON0_RANK_SHIFT 24
+#define ECC_POISON1_BANKGRP_SHIFT 28
+#define ECC_POISON1_BANKNR_SHIFT 24
+
/* DDR Memory type defines */
#define MEM_TYPE_DDR3 0x1
#define MEM_TYPE_LPDDR3 0x1
@@ -181,6 +187,38 @@
#define MEM_TYPE_DDR4 0x10
#define MEM_TYPE_LPDDR4 0x10
+/* DDRC Software control register */
+#define DDRC_SWCTL 0x320
+
+/* DDRC ECC CE & UE poison mask */
+#define ECC_CEPOISON_MASK 0x3
+#define ECC_UEPOISON_MASK 0x1
+
+/* DDRC Device config masks */
+#define DDRC_MSTR_DEV_CONFIG_MASK 0xC0000000
+#define DDRC_MSTR_DEV_CONFIG_SHIFT 30
+#define DDRC_MSTR_DEV_CONFIG_X4_MASK 0
+#define DDRC_MSTR_DEV_CONFIG_X8_MASK 1
+#define DDRC_MSTR_DEV_CONFIG_X16_MASK 0x10
+#define DDRC_MSTR_DEV_CONFIG_X32_MASK 0X11
+
+/* DDR4 and DDR3 device Row,Column,Bank Mapping */
+#define DDR4_COL_SHIFT 3
+#define DDR4_BANKGRP_SHIFT 13
+#define DDR4_BANK_SHIFT 15
+#define DDR4_ROW_SHIFT 17
+#define DDR4_COL_MASK 0x3FF
+#define DDR4_BANKGRP_MASK 0x3
+#define DDR4_BANK_MASK 0x3
+#define DDR4_ROW_MASK 0x7FFF
+
+#define DDR3_COL_SHIFT 3
+#define DDR3_BANK_SHIFT 13
+#define DDR3_ROW_SHIFT 16
+#define DDR3_COL_MASK 0x3FF
+#define DDR3_BANK_MASK 0x7
+#define DDR3_ROW_MASK 0x3FFF
+
/**
* struct ecc_error_info - ECC error log information
* @row: Row number
@@ -223,6 +261,7 @@ struct synps_ecc_status {
* @p_data: Pointer to platform data
* @ce_cnt: Correctable Error count
* @ue_cnt: Uncorrectable Error count
+ * @poison_addr:Data poison address
*/
struct synps_edac_priv {
void __iomem *baseaddr;
@@ -231,6 +270,7 @@ struct synps_edac_priv {
const struct synps_platform_data *p_data;
u32 ce_cnt;
u32 ue_cnt;
+ ulong poison_addr;
};
/**
@@ -628,6 +668,7 @@ static enum mem_type synps_enh_edac_get_mtype(const void __iomem *base)
memtype = readl(base + CTRL_OFST);
+ mt = MEM_UNKNOWN;
if ((memtype & MEM_TYPE_DDR3) || (memtype & MEM_TYPE_LPDDR3))
mt = MEM_DDR3;
else if (memtype & MEM_TYPE_DDR2)
@@ -732,7 +773,8 @@ static int synps_edac_mc_init(struct mem_ctl_info *mci,
.synps_edac_get_mtype = synps_enh_edac_get_mtype,
.synps_edac_get_dtype = synps_enh_edac_get_dtype,
.synps_edac_get_eccstate = synps_enh_edac_get_eccstate,
- .quirks = DDR_ECC_INTR_SUPPORT,
+ .quirks = (DDR_ECC_INTR_SUPPORT |
+ DDR_ECC_DATA_POISON_SUPPORT),
};
static const struct of_device_id synps_edac_match[] = {
@@ -744,6 +786,242 @@ static int synps_edac_mc_init(struct mem_ctl_info *mci,
MODULE_DEVICE_TABLE(of, synps_edac_match);
+#define to_mci(k) container_of(k, struct mem_ctl_info, dev)
+
+/**
+ * ddr4_poison_setup - update poison registers
+ * @dttype: Device structure variable
+ * @device_config: Device configuration
+ * @priv: Pointer to synps_edac_priv struct
+ *
+ * Update poison registers as per ddr4 mapping
+ * Return: none.
+ */
+static void ddr4_poison_setup(enum dev_type dttype, int device_config,
+ struct synps_edac_priv *priv)
+{
+ int col, row, bank, bankgrp, regval, shift_val = 0, col_shift;
+
+ /* Check the Configuration of the device */
+ if (device_config & DDRC_MSTR_DEV_CONFIG_X8_MASK) {
+ /* For Full Dq bus */
+ if (dttype == DEV_X8)
+ shift_val = 0;
+ /* For Half Dq bus */
+ else if (dttype == DEV_X4)
+ shift_val = 1;
+ col_shift = 0;
+ } else if (device_config & DDRC_MSTR_DEV_CONFIG_X16_MASK) {
+ if (dttype == DEV_X8)
+ shift_val = 1;
+ else if (dttype == DEV_X4)
+ shift_val = 2;
+ col_shift = 1;
+ }
+
+ col = (priv->poison_addr >> (DDR4_COL_SHIFT -
+ (shift_val - col_shift))) &
+ DDR4_COL_MASK;
+ row = priv->poison_addr >> (DDR4_ROW_SHIFT - shift_val);
+ row &= DDR4_ROW_MASK;
+ bank = priv->poison_addr >> (DDR4_BANK_SHIFT - shift_val);
+ bank &= DDR4_BANK_MASK;
+ bankgrp = (priv->poison_addr >> (DDR4_BANKGRP_SHIFT -
+ (shift_val - col_shift))) &
+ DDR4_BANKGRP_MASK;
+
+ writel(col, priv->baseaddr + ECC_POISON0_OFST);
+ regval = (bankgrp << ECC_POISON1_BANKGRP_SHIFT) |
+ (bank << ECC_POISON1_BANKNR_SHIFT) | row;
+ writel(regval, priv->baseaddr + ECC_POISON1_OFST);
+}
+
+/**
+ * ddr3_poison_setup - update poison registers
+ * @dttype: Device structure variable
+ * @device_config: Device configuration
+ * @priv: Pointer to synps_edac_priv struct
+ *
+ * Update poison registers as per ddr3 mapping
+ * Return: none.
+ */
+static void ddr3_poison_setup(enum dev_type dttype, int device_config,
+ struct synps_edac_priv *priv)
+{
+ int col, row, bank, bankgrp, regval, shift_val = 0;
+
+ if (dttype == DEV_X8)
+ /* For Full Dq bus */
+ shift_val = 0;
+ else if (dttype == DEV_X4)
+ /* For Half Dq bus */
+ shift_val = 1;
+
+ col = (priv->poison_addr >> (DDR3_COL_SHIFT - shift_val)) &
+ DDR3_COL_MASK;
+ row = priv->poison_addr >> (DDR3_ROW_SHIFT - shift_val);
+ row &= DDR3_ROW_MASK;
+ bank = priv->poison_addr >> (DDR3_BANK_SHIFT - shift_val);
+ bank &= DDR3_BANK_MASK;
+ bankgrp = 0;
+ writel(col, priv->baseaddr + ECC_POISON0_OFST);
+ regval = (bankgrp << ECC_POISON1_BANKGRP_SHIFT) |
+ (bank << ECC_POISON1_BANKNR_SHIFT) | row;
+ writel(regval, priv->baseaddr + ECC_POISON1_OFST);
+}
+
+/**
+ * synps_edac_mc_inject_data_error_show - Get Poison0 & 1 register contents
+ * @dev: Pointer to the device struct
+ * @mattr: Pointer to device attributes
+ * @data: Pointer to user data
+ *
+ * Get the Poison0 and Poison1 register contents
+ * Return: Number of bytes copied.
+ */
+static ssize_t synps_edac_mc_inject_data_error_show(struct device *dev,
+ struct device_attribute *mattr,
+ char *data)
+{
+ struct mem_ctl_info *mci = to_mci(dev);
+ struct synps_edac_priv *priv = mci->pvt_info;
+
+ return sprintf(data, "Poison0 Addr: 0x%08x\n\rPoison1 Addr: 0x%08x\n\r"
+ "Error injection Address: 0x%lx\n\r",
+ readl(priv->baseaddr + ECC_POISON0_OFST),
+ readl(priv->baseaddr + ECC_POISON1_OFST),
+ priv->poison_addr);
+}
+
+/**
+ * synps_edac_mc_inject_data_error_store - Configure Poison0 Poison1 registers
+ * @dev: Pointer to the device struct
+ * @mattr: Pointer to device attributes
+ * @data: Pointer to user data
+ * @count: read the size bytes from buffer
+ *
+ * Configures the Poison0 and Poison1 register contents as per user given
+ * address
+ * Return: Number of bytes copied.
+ */
+static ssize_t synps_edac_mc_inject_data_error_store(struct device *dev,
+ struct device_attribute *mattr,
+ const char *data, size_t count)
+{
+ struct mem_ctl_info *mci = to_mci(dev);
+ struct synps_edac_priv *priv = mci->pvt_info;
+ int device_config;
+ enum mem_type mttype;
+ enum dev_type dttype;
+
+ mttype = priv->p_data->synps_edac_get_mtype(
+ priv->baseaddr);
+ dttype = priv->p_data->synps_edac_get_dtype(
+ priv->baseaddr);
+ if (kstrtoul(data, 0, &priv->poison_addr))
+ return -EINVAL;
+
+ device_config = readl(priv->baseaddr + CTRL_OFST);
+ device_config = (device_config & DDRC_MSTR_DEV_CONFIG_MASK) >>
+ DDRC_MSTR_DEV_CONFIG_SHIFT;
+ if (mttype == MEM_DDR4)
+ ddr4_poison_setup(dttype, device_config, priv);
+ else if (mttype == MEM_DDR3)
+ ddr3_poison_setup(dttype, device_config, priv);
+
+ return count;
+}
+
+/**
+ * synps_edac_mc_inject_data_poison_show - Shows type of Data poison
+ * @dev: Pointer to the device struct
+ * @mattr: Pointer to device attributes
+ * @data: Pointer to user data
+ *
+ * Shows the type of Error injection enabled, either UE or CE
+ * Return: Number of bytes copied.
+ */
+static ssize_t synps_edac_mc_inject_data_poison_show(struct device *dev,
+ struct device_attribute *mattr,
+ char *data)
+{
+ struct mem_ctl_info *mci = to_mci(dev);
+ struct synps_edac_priv *priv = mci->pvt_info;
+
+ return sprintf(data, "Data Poisoning: %s\n\r",
+ ((readl(priv->baseaddr + ECC_CFG1_OFST)) & 0x3) ?
+ ("Correctable Error"):("UnCorrectable Error"));
+}
+
+/**
+ * synps_edac_mc_inject_data_poison_store - Enbles Data poison CE/UE
+ * @dev: Pointer to the device struct
+ * @mattr: Pointer to device attributes
+ * @data: Pointer to user data
+ * @count: read the size bytes from buffer
+ *
+ * Enables the CE or UE Data poison
+ * Return: Number of bytes copied.
+ */
+static ssize_t synps_edac_mc_inject_data_poison_store(struct device *dev,
+ struct device_attribute *mattr,
+ const char *data, size_t count)
+{
+ struct mem_ctl_info *mci = to_mci(dev);
+ struct synps_edac_priv *priv = mci->pvt_info;
+
+ writel(0, priv->baseaddr + DDRC_SWCTL);
+ if (strncmp(data, "CE", 2) == 0)
+ writel(ECC_CEPOISON_MASK, priv->baseaddr + ECC_CFG1_OFST);
+ else
+ writel(ECC_UEPOISON_MASK, priv->baseaddr + ECC_CFG1_OFST);
+ writel(1, priv->baseaddr + DDRC_SWCTL);
+
+ return count;
+}
+
+static DEVICE_ATTR(inject_data_error, 0644,
+ synps_edac_mc_inject_data_error_show,
+ synps_edac_mc_inject_data_error_store);
+static DEVICE_ATTR(inject_data_poison, 0644,
+ synps_edac_mc_inject_data_poison_show,
+ synps_edac_mc_inject_data_poison_store);
+
+/**
+ * synps_edac_create_sysfs_attributes - Create sysfs entries
+ * @mci: Pointer to the edac memory controller instance
+ *
+ * Create sysfs attributes for injecting ECC errors using data poison.
+ *
+ * Return: 0 if sysfs creation was successful, else return negative error code.
+ */
+static int synps_edac_create_sysfs_attributes(struct mem_ctl_info *mci)
+{
+ int rc;
+
+ rc = device_create_file(&mci->dev, &dev_attr_inject_data_error);
+ if (rc < 0)
+ return rc;
+ rc = device_create_file(&mci->dev, &dev_attr_inject_data_poison);
+ if (rc < 0)
+ return rc;
+ return 0;
+}
+
+/**
+ * synps_edac_remove_sysfs_attributes - Removes sysfs entries
+ * @mci: Pointer to the edac memory controller instance
+ *
+ * Removes sysfs attributes.
+ *
+ * Return: none.
+ */
+static void synps_edac_remove_sysfs_attributes(struct mem_ctl_info *mci)
+{
+ device_remove_file(&mci->dev, &dev_attr_inject_data_error);
+ device_remove_file(&mci->dev, &dev_attr_inject_data_poison);
+}
+
/**
* synps_edac_mc_probe - Check controller and bind driver
* @pdev: Pointer to the platform_device struct
@@ -831,6 +1109,13 @@ static int synps_edac_mc_probe(struct platform_device *pdev)
goto free_edac_mc;
}
+ if (priv->p_data->quirks & DDR_ECC_DATA_POISON_SUPPORT) {
+ if (synps_edac_create_sysfs_attributes(mci)) {
+ edac_printk(KERN_ERR, EDAC_MC,
+ "Failed to create sysfs entries\n");
+ goto free_edac_mc;
+ }
+ }
/*
* Start capturing the correctable and uncorrectable errors. A write of
* 0 starts the counters.
@@ -854,8 +1139,12 @@ static int synps_edac_mc_probe(struct platform_device *pdev)
static int synps_edac_mc_remove(struct platform_device *pdev)
{
struct mem_ctl_info *mci = platform_get_drvdata(pdev);
+ struct synps_edac_priv *priv;
+ priv = mci->pvt_info;
edac_mc_del_mc(&pdev->dev);
+ if (priv->p_data->quirks & DDR_ECC_DATA_POISON_SUPPORT)
+ synps_edac_remove_sysfs_attributes(mci);
edac_mc_free(mci);
return 0;
--
1.9.1
More information about the linux-arm-kernel
mailing list