[linux-sunxi] [PATCH 10/13] [NOT FOR REVIEW NOW] clk: sunxi: Add CLK_SET_RATE_PARENT flag for H3 HDMI clock

[Chen-Yu Tsai]

On Fri, Aug 4, 2017 at 4:59 PM, Jernej Škrabec <jernej.skrabec at siol.net> wrote:
> Hi Chen-Yu,
>
> Dne petek, 04. avgust 2017 ob 06:29:50 CEST je Chen-Yu Tsai napisal(a):
>> On Fri, Aug 4, 2017 at 12:16 PM, Icenowy Zheng <icenowy at aosc.io> wrote:
>> > 于 2017年8月4日 GMT+08:00 下午12:15:27, Chen-Yu Tsai <wens at csie.org> 写到:
>> >>Hi,
>> >>
>> >>On Tue, Aug 1, 2017 at 9:13 PM, Icenowy Zheng <icenowy at aosc.io> wrote:
>> >>> From: Jernej Skrabec <jernej.skrabec at siol.net>
>> >>>
>> >>> When setting the HDMI clock of H3, the PLL_VIDEO clock needs to be
>> >>
>> >>set.
>> >>
>> >>> Add CLK_SET_RATE_PARENT flag for H3 HDMI clock.
>> >>>
>> >>> Signed-off-by: Jernej Skrabec <jernej.skrabec at siol.net>
>> >>> Signed-off-by: Icenowy Zheng <icenowy at aosc.io>
>> >>> ---
>> >>>
>> >>>  drivers/clk/sunxi-ng/ccu-sun8i-h3.c | 2 +-
>> >>>  1 file changed, 1 insertion(+), 1 deletion(-)
>> >>>
>> >>> diff --git a/drivers/clk/sunxi-ng/ccu-sun8i-h3.c
>> >>
>> >>b/drivers/clk/sunxi-ng/ccu-sun8i-h3.c
>> >>
>> >>> index b1127e8629d9..2ebb3d865b01 100644
>> >>> --- a/drivers/clk/sunxi-ng/ccu-sun8i-h3.c
>> >>> +++ b/drivers/clk/sunxi-ng/ccu-sun8i-h3.c
>> >>> @@ -474,7 +474,7 @@ static SUNXI_CCU_GATE(avs_clk,
>> >>
>> >>"avs",          "osc24M",
>> >>
>> >>>  static const char * const hdmi_parents[] = { "pll-video" };
>> >>>  static SUNXI_CCU_M_WITH_MUX_GATE(hdmi_clk, "hdmi", hdmi_parents,
>> >>>
>> >>> -                                0x150, 0, 4, 24, 2, BIT(31), 0);
>> >>> +                                0x150, 0, 4, 24, 2, BIT(31),
>> >>
>> >>CLK_SET_RATE_PARENT);
>> >>
>> >>Line is longer than 80 characters.
>> >>
>> >>This looks independent enough so I've merged this for 4.14 with the
>> >>offending line wrapped and the following tag added:
>> >>
>> >>Fixes: 0577e4853bfb ("clk: sunxi-ng: Add H3 clocks")
>> >>
>> > Please don't merge this now until Jernej send it.
>>
>> (Dropped Rob, devicetree and dri mailing lists)
>>
>> Hi Jernej,
>>
>> Is it OK if we take this patch for the next release? Or rather,
>> if there anything blocking this patch?
>
> I just made last check now and this patch is indeed OK. Before merging, please
> read explanation below.

Ack.

>
> Background:
> According to H3 datasheet and BSP driver, HDMI clock has M factor (divider) to
> correctly set pixel clock to desired value. However, Jens Kuske discovered
> that this factor doesn't play any role whatsoever and instead, division factor
> set in PHY registers is the important one. I confirmed that on BSP kernel by
> tying M factor to 0. Both, HDMI video and audio, still worked correctly.

Great. Sounds like what we have on A31 and earlier SoCs.

>
> So that flag is necessary to set pll-video to pixel clock * div factor. I can
> also change HDMI clock type to SUNXI_CCU_GATE (without M factor) and document
> discrepancy with datasheet in ccu-sun8i-h3.c. Alternatively to this patch,
> just in case, to be on the safe side, I can add pll-video clock phandle to the
> dt node. However, as far as I know, that might prevent selecting another
> parent on SoCs where HDMI clock has multiple parents.

It could be that the HDMI clock only drives the DW-HDMI sampler and other
internal logic, while the PHY takes the PLL input directly for the TMDS
clock? I'm not sure how you could verify this though. Maybe increase M
to the maximum, and see if there is any tearing or other artifacts?
Ideally we could just ask Allwinner...

You should change it to SUNXI_CCU_MUX_WITH_GATE if you want to change it.
If there are mux bits, even if there's only one valid setting, you should
still have the mux, so the kernel can actually correct any invalid settings
that may be incorrectly programmed into the hardware by the bootloader or
user. This would be a separate patch.

How we support other SoCs really depends on whether the TMDS clock bits
have a mux or not, or whether they are connected to the HDMI mod clock
in any way.

Regards
ChenYu

>
> Regards,
> Jernej
>
>>
>> Thanks
>> ChenYu
>>
>> >>ChenYu
>> >>
>> >>>  static SUNXI_CCU_GATE(hdmi_ddc_clk,    "hdmi-ddc",     "osc24M",
>> >>>
>> >>>                       0x154, BIT(31), 0);
>> >>>