[v4 1/2] dt-bindings: gpio: davinci: Add keystone-k2g compatible
Keerthy
j-keerthy at ti.com
Thu Aug 3 22:45:38 PDT 2017
The patch adds keystone-k2g compatible, specific properties and
an example. The patch also adds the details of supported SoCs
for each compatible.
Signed-off-by: Keerthy <j-keerthy at ti.com>
Acked-by: Rob Herring <robh at kernel.org>
---
Changes in v4:
* Changed documentation links.
* Added Rob's Ack.
* Replaced keystone-k2g with 66AK2G
* Corrected the $Subject
* Changed compatible to ti,k2g-gpio
Changes in v3:
* Added details about family of SoCs corresponding to compatibles.
.../devicetree/bindings/gpio/gpio-davinci.txt | 91 +++++++++++++++++++++-
1 file changed, 89 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/gpio/gpio-davinci.txt b/Documentation/devicetree/bindings/gpio/gpio-davinci.txt
index 5079ba7..5ad08b2 100644
--- a/Documentation/devicetree/bindings/gpio/gpio-davinci.txt
+++ b/Documentation/devicetree/bindings/gpio/gpio-davinci.txt
@@ -1,7 +1,10 @@
Davinci/Keystone GPIO controller bindings
Required Properties:
-- compatible: should be "ti,dm6441-gpio", "ti,keystone-gpio"
+- compatible: should be "ti,dm6441-gpio": for Davinci da850 SoCs
+ "ti,keystone-gpio": for Keystone 2 66AK2H/K, 66AK2L,
+ 66AK2E SoCs
+ "ti,k2g-gpio", "ti,keystone-gpio": for 66AK2G
- reg: Physical base address of the controller and the size of memory mapped
registers.
@@ -20,7 +23,21 @@ Required Properties:
- ti,ngpio: The number of GPIO pins supported.
- ti,davinci-gpio-unbanked: The number of GPIOs that have an individual interrupt
- line to processor.
+ line to processor.
+
+- clocks: Should contain the device's input clock, and should be defined as per
+ the appropriate clock bindings consumer usage in,
+
+ Documentation/devicetree/bindings/clock/keystone-gate.txt
+ for 66AK2HK/66AK2L/66AK2E SoCs or,
+
+ Documentation/devicetree/bindings/clock/ti,sci-clk.txt
+ for 66AK2G SoCs
+
+- clock-names: Name should be "gpio";
+
+Currently clock-names and clocks are needed for all keystone 2 platforms
+Davinci platforms do not have DT clocks as of now.
The GPIO controller also acts as an interrupt controller. It uses the default
two cells specifier as described in Documentation/devicetree/bindings/
@@ -60,3 +77,73 @@ leds {
...
};
};
+
+Example for 66AK2G:
+
+gpio0: gpio at 2603000 {
+ compatible = "ti,k2g-gpio", "ti,keystone-gpio";
+ reg = <0x02603000 0x100>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupts = <GIC_SPI 432 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 433 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 434 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 435 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 436 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 437 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 438 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 439 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 440 IRQ_TYPE_EDGE_RISING>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ ti,ngpio = <144>;
+ ti,davinci-gpio-unbanked = <0>;
+ clocks = <&k2g_clks 0x001b 0x0>;
+ clock-names = "gpio";
+};
+
+Example for 66AK2HK/66AK2L/66AK2E:
+
+gpio0: gpio at 260bf00 {
+ compatible = "ti,keystone-gpio";
+ reg = <0x0260bf00 0x100>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ /* HW Interrupts mapped to GPIO pins */
+ interrupts = <GIC_SPI 120 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 121 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 122 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 123 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 124 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 125 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 126 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 127 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 128 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 129 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 130 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 131 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 132 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 133 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 134 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 135 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 136 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 137 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 138 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 139 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 140 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 141 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 142 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 143 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 144 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 145 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 146 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 147 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 148 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 149 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 150 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 151 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&clkgpio>;
+ clock-names = "gpio";
+ ti,ngpio = <32>;
+ ti,davinci-gpio-unbanked = <32>;
+};
--
1.9.1
More information about the linux-arm-kernel
mailing list