[PATCH v2 1/4] dt-bindings: phy-hisi-inno-usb2: add support for hisi-inno-usb2 phy

[Rob Herring]

On Wed, Jul 26, 2017 at 02:06:00PM +0800, Jiancheng Xue wrote:
> Add support for hisi-inno-usb2 phy.
> 
> Signed-off-by: Jiancheng Xue <xuejiancheng at hisilicon.com>
> ---
>  .../devicetree/bindings/phy/phy-hisi-inno-usb2.txt | 31 ++++++++++++++++++++++
>  1 file changed, 31 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/phy/phy-hisi-inno-usb2.txt
> 
> diff --git a/Documentation/devicetree/bindings/phy/phy-hisi-inno-usb2.txt b/Documentation/devicetree/bindings/phy/phy-hisi-inno-usb2.txt
> new file mode 100644
> index 0000000..417eeaa
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/phy/phy-hisi-inno-usb2.txt
> @@ -0,0 +1,31 @@
> +HiSilicon INNO USB2 PHY
> +-----------------------
> +Required properties:
> +- compatible: Should be one of the following strings:
> +		"hisilicon,inno-usb2-phy",
> +		"hisilicon,hi3798cv200-usb2-phy",
> +- #phy-cells: Shall be 0.
> +- hisilicon,peripheral-syscon: Phandle of syscon used to control phy.
> +- hisilicon,phycon-reg: Offset of the phy control register in the syscon.

Just make this a cell of hisilicon,peripheral-syscon: <&syscon 0x120>

With that,

Acked-by: Rob Herring <robh at kernel.org>