[PATCH 0/6] Support for LEGO MINDSTORMS EV3 LCD display

[Andy Shevchenko]

On Thu, Aug 3, 2017 at 8:09 PM, Andy Shevchenko
<andy.shevchenko at gmail.com> wrote:
> On Thu, Aug 3, 2017 at 6:18 PM, David Lechner <david at lechnology.com> wrote:
>
>> The particular display I have is this one:
>> http://wiki.seeed.cc/Grove-OLED_Display_1.12inch/
>>
>> It looks like it uses a command/data scheme like the MIPI displays, but
>> doesn't use any of the standard values for the commands. The controller can
>> do parallel, SPI and I2C, but the display I have is wired for I2C.
>
> It looks very similar to ssd1306. Some description refers to ssd1308.

http://www.mouser.com/catalog/specsheets/Seeed_104030008.pdf


-- 
With Best Regards,
Andy Shevchenko