[PATCH 2/2] arm64: dts: ls2088a: add cpu idle support

[Shawn Guo]

On Wed, Jul 26, 2017 at 03:24:53PM +0800, andy.tang at nxp.com wrote:
> From: Yuantian Tang <andy.tang at nxp.com>
> 
> ls2088a supports another cpu idle state which is pw20 which saves
> more power when cpu is idle.
> It was implemented through psci firmware.
> 
> Signed-off-by: Tang Yuantian <andy.tang at nxp.com>

Can you explain a bit in the commit log why psci node is being added in
fsl-ls208xa.dtsi while you are only adding idle state for ls2088a?  Does
that mean ls2088a and ls2080a gets different idle implementation?

Shawn

> ---
>  arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi | 17 +++++++++++++++++
>  arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi |  5 +++++
>  2 files changed, 22 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi
> index 5c695c6..6aa319d 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi
> @@ -53,6 +53,7 @@
>  		compatible = "arm,cortex-a72";
>  		reg = <0x0>;
>  		clocks = <&clockgen 1 0>;
> +		cpu-idle-states = <&CPU_PW20>;
>  		next-level-cache = <&cluster0_l2>;
>  		#cooling-cells = <2>;
>  	};
> @@ -62,6 +63,7 @@
>  		compatible = "arm,cortex-a72";
>  		reg = <0x1>;
>  		clocks = <&clockgen 1 0>;
> +		cpu-idle-states = <&CPU_PW20>;
>  		next-level-cache = <&cluster0_l2>;
>  	};
>  
> @@ -70,6 +72,7 @@
>  		compatible = "arm,cortex-a72";
>  		reg = <0x100>;
>  		clocks = <&clockgen 1 1>;
> +		cpu-idle-states = <&CPU_PW20>;
>  		next-level-cache = <&cluster1_l2>;
>  		#cooling-cells = <2>;
>  	};
> @@ -79,6 +82,7 @@
>  		compatible = "arm,cortex-a72";
>  		reg = <0x101>;
>  		clocks = <&clockgen 1 1>;
> +		cpu-idle-states = <&CPU_PW20>;
>  		next-level-cache = <&cluster1_l2>;
>  	};
>  
> @@ -88,6 +92,7 @@
>  		reg = <0x200>;
>  		clocks = <&clockgen 1 2>;
>  		next-level-cache = <&cluster2_l2>;
> +		cpu-idle-states = <&CPU_PW20>;
>  		#cooling-cells = <2>;
>  	};
>  
> @@ -96,6 +101,7 @@
>  		compatible = "arm,cortex-a72";
>  		reg = <0x201>;
>  		clocks = <&clockgen 1 2>;
> +		cpu-idle-states = <&CPU_PW20>;
>  		next-level-cache = <&cluster2_l2>;
>  	};
>  
> @@ -104,6 +110,7 @@
>  		compatible = "arm,cortex-a72";
>  		reg = <0x300>;
>  		clocks = <&clockgen 1 3>;
> +		cpu-idle-states = <&CPU_PW20>;
>  		next-level-cache = <&cluster3_l2>;
>  		#cooling-cells = <2>;
>  	};
> @@ -113,6 +120,7 @@
>  		compatible = "arm,cortex-a72";
>  		reg = <0x301>;
>  		clocks = <&clockgen 1 3>;
> +		cpu-idle-states = <&CPU_PW20>;
>  		next-level-cache = <&cluster3_l2>;
>  	};
>  
> @@ -131,6 +139,15 @@
>  	cluster3_l2: l2-cache3 {
>  		compatible = "cache";
>  	};
> +
> +	CPU_PW20: cpu-pw20 {
> +		compatible = "arm,idle-state";
> +		idle-state-name = "PW20";
> +		arm,psci-suspend-param = <0x00010000>;
> +		entry-latency-us = <2000>;
> +		exit-latency-us = <2000>;
> +		min-residency-us = <6000>;
> +	};
>  };
>  
>  &pcie1 {
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
> index 94cdd30..205b7f7 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
> @@ -118,6 +118,11 @@
>  		interrupts = <1 7 0x8>; /* PMU PPI, Level low type */
>  	};
>  
> +	psci {
> +		compatible = "arm,psci-0.2";
> +		method = "smc";
> +	};
> +
>  	soc {
>  		compatible = "simple-bus";
>  		#address-cells = <2>;
> -- 
> 2.1.0.27.g96db324
> 
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel